How can i telnet or get access to other LAN members in LAN without using third party software?

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?
its linksys3500 router and i login as admin using the gateway address in address bar..
i want to access the c drive of my colleague in same subnet in same office and i know his ip address.but he not configured telnet accept request.so without it how can i open his telnet port and access him

I think you are using the wrong terminology. You can browse the hidden share of any pc if you know the ip and have a valid user account on the pc by typing in the following \\computername\c$ or \\ipaddress\c$ . It should prompt you for a user account. You may have to allow this through the windows firewall (or disable it completely).

Similar Messages

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?
its linksys3500 router and i login as admin using the gateway address in address bar..
i want to access the c drive of my colleague in same subnet in same office and i know his ip address.but he not configured telnet accept request.so without it how can i open his telnet port and access him

Duplicate post.

How can I grant users to access/modify system folders (C:/Windows/Fonts) by using GPO in Win7 ?

In our company there are some folks that require often new fonts that they take from the internet. Unfortunately, some of them have offices on in a diferrent country, so going there to insert my admin paswoord is not a solution.
If you copy the ttf file into the C:/Windows/Font folder is enough, you don't have to also add the registry.
One way to bypass the window that asks for admin credentials is to insert my crdentials into the bat file (runas). But this is very unsecure, as I am an administrator.
Is there a way to create a shared folder that can also store fonts that can be used by windows? Can I give them the right to modify files in this folder without making them administrators? Or do you see any solution to this issue? Any help would
be greatly appreciated.
Thank you in advance.

Another solution which will not compromise your security is to create a share folder and have the users to download fonts to the folder. After that a simple schedule task GPO on clients to copy the
*.ttf files from the folder to the C:\Windows\Fonts folder. Since tha task can be run by administrative privileges I guess there will be no problem.
Regards.
Mahdi Tehrani Loves Powershell
Please kindly click on Propose As Answer
or to mark this post as
and helpful to other people.

HT1296 How can I transfer my ipad calendar to my iphone and ipod touch without using gmail?

How can I transfer the Calendar on my ipad2 to my iphone5 and ipod touch without using gmail, and keep them synced?

You could use iCloud, or you could sync them through iTunes on a Mac or a Windows computer.

How can I make hyperlinks work in InCopy when I export to PDF without using InDesign?

I created an InCopy document with hyperlinks linking to other InCopy documents. When I exported to PDF, these hyperlinks don't work. Is there any way I can make these hyperlinks work without using InDesign? Thanks.

beer and no prepress schrieb:
If it's for the web, why not export to JPEG? Why PDF?
Terrible idea. In a JPG the text will not be alive, you loose all interactivity.
And making JPGs with InDesign is not what the program is meant to make.

How to minify code in DW CS6 without using third party tools?

I work in a secure environment without access to the internet or third party plugins. We just have access to Dreamweaver CS6 and I am looking for ways to minify (remove all the white space) in my code (CSS, JS, HTML, etc). I did see a tutorial about simply selecting white space in the code and then doing a FIND AND REPLACE and clicking the "REPLACE ALL" button to remove the white space, but that did not work on my system.
Does anyone have any solutions? I am open to copying and pasting the code in something like notepad if there's a way to remove the whitespace that way, I could also possibly copy a php script to my system, but that will take some time to get cleared by the IT folks.
Thanks!

Use Edit > Preferences > Code Format > Tag Libraries to set up how you want your code to appear. Then use Command > Apply Source Formatting. It won't minify your code to the extent that other on-line minification tools will, but it might help a little.
Removing all white spaces from scripts can cause them to fail so I don't think doing a global Find & Replace is what you want.
Nancy O.

How to determine if my Mac is running correctly without useing 3rd party software

Is there a way to determine if my Mac is running correctly without involving the use of 3rd party software? Some kind of command line diagnostic?

Why do you think it's not running correctly? Please let us know the symptoms you are experiencing, without any data how can we tell you what tool to use??

How can I transfer and store data from my PC on the ipad without using icloud

I am a new user having received the iPad air/2 from my family as an 80th birthday gift. (at my request).
At this stage my principal usage is to transfer photos for PC to show family when visiting. I tried iTunes but it caused many problems with my PC, so I un-installed it. I found an ap which did the job simply and easily via wi fi transfer.
My other main usage is to be able to play my music transferred from my PC to the ipad and held in it's memory so that it can be used even when off line.
In other words iCloud doesn't seem to be able to do this.
I sent myself a song via an email, downloaded it on to the ipad, listened to it, then closed the email.
I cannot now find where that song has got to to retrieve... ipad search says it can't find it.
Basically I want to transfer a folder of music into the ipad and play them back at will.
Can anyone help me?
Sorry to be so longwinded.. cheers Ted
My PC runs Windows 7 64 bit.
iPad is IOS8 I believe with 64 GB memory.

You shouldn't be worrying about 'hackers'. Apple have good security & so long as you pick good passwords the data should be safe.
There are parts of using iOS & iTunes that requires an Apple ID & iCloud, however you can disable many of the feature you do not need, and avoid syncing any files into iCloud. It can be annoying, but a lot of the services help to make backups easy.
You may want to visit into an Apple store if you are near one, they may try to sell you on the benefits of iCloud (it's kind of their job), but they may also be able to help you get the iPad under control. See if you can get the PC setup with iTunes, that is probably where you need to start.
Good luck with it

How can i re-enable/restore a disabled iPad and keep the data without using a laptop or iCloud

Hello,
Is there a way to re-enable a disabled iPad and maintain the data taking into consideration that no iCloud backup was made and the computer it was last synced with was not available? any idea?

No, sorry. Without a backup in iCloud or iTunes, you will have to set it up as if new and anything on it will be lost now.
You can always re-download purchased apps and content (other than audiobooks) once it is restored, from the respective iTunes or App stores.

How can I sync my calendar from my MacAir to my iPod touch without using the cloud?

I will be out of wi fi range most of next year and want to know how to sync my calendar from my computer to my ipod touch and vice versa manually.

To do this, plug your iPod Touch into iTunes on your MacAir. From there, find the tab on the left of iTunes where your iPod is located. Once you are on that, go to "Info" on the top row. From there you should be able to choose to sync calendars and contacts.
Hope this helped.

How can I back up my photos from my iPad to my mac without using iPhoto?

Hi guys!
My iPad screen broke down. The sound still works but the screen doesn't. I was wondering if anyone knows the approximate cost of replacing it? It's not cracked or anything.
Also I want to back up my photos but whenever I try backing them up with iPhoto, iPhoto says there's an error. Is there any other way to back it up? I've tried backing them up from itunes to my computer but I'm not sure where it went.. When I looked through the Mobile Application folder, all I see is my apps.
If anyone knows the answers to my questions, please let me know asap! Thanks guys!

This explains out-of-warranty service if you are in the U.S.:

How to use third party software

I have downloaded the Real Guitar demo to try out with Logic. I have never used sounds other than those that came with Logic. How do I set up Real Guitar so that I can use those sounds in Logic? Thanks.

Quit Logic. Install RG, just follow the onscreen instructions. When the installation is complete, start Logic, create a *Software Instrument track,* go to the *i/o slot* on the *channel strip*:
!http://farm5.static.flickr.com/4006/46126704682468f6d04em.jpg!
click it and select Musiclabs>RealGuitar:
!http://farm4.static.flickr.com/3338/4612670388_ac07dc50d0.jpg!
and strum away - whilst keeping the RG manual open in the background.

Need help on how to permanently delete applications/programs without using third party applications

Title says it all...
Hope you guys can help me out.
Thanks!

See Here...
http://macmost.com/uninstalling-apps-in-mac-os-x-lion.html

How can I prevent my texts showing on another family members iPhone?

How can I prevent my texts showing on another family members iPhone?

Stop using the same apple ID for iMessage on both phones.
Your question has already been asked and answered many many times. Search before posting please.

Can I enable wrapping paper artwork to be personalised by third party software

Hi Guys
Ive been asked to produce wrapping paper designs by a client that will be printed on a large format printer.
The client would like to have a set of templates/tiled artwork created which then can be personalised by a user.
The process needs to be very simple with minimal input from the user, the perfect solutiuon would be the user updates a text/spreadsheet which would update the template.
Has anyone had any experience using third party software to automate the process?
Any pointers are appreciated.

The first approach is rather straightforward. Create the filenames programmatically, typically by adding 1 to a number at the end of the previous filename. The string and path manipulation functions can easily do this. This would produce a series of files named filename, filename1, filename2, filename3, filename4, ...
The alternating file approach is also feasible. The key there is coordination between the two programs so that they are not both competing for the same file. You need to have a plan for what to do with the data if the alternate file has not been released by the other program when LV needs to write to it.
Lynn

How can i telnet or get access to other LAN members in LAN without using third party software?

Similar Messages

Maybe you are looking for