How can i test after creating Message mapping transformations

Hi guys,
How can i test my transformation after creation of message mapping in Integration Repository.
Pleae expain step by step procedure
Thanks & Regards.,
Pushparaju.B

Hi,
1. If you just want to test the mapping --In message Mapping there are three tab, the second one being hte Test tAb. So u can pu the values in the left side XML and do test.
http://help.sap.com/saphelp_nw04/helpdata/en/c3/e3072e65f04445a010847aa970b68b/content.htm
2. You can do the Testing from Interface mapping also. There is a Test tab there too.
3. If you have created the whole scnerio then you can do testing from Integration directory:
http://help.sap.com/saphelp_nw04/helpdata/en/6b/874a4273bb3830e10000000a155106/content.htm
Regards
Vijaya

Similar Messages

How can we test XSL mapping program

Hi Experts,
I have XSL mapping program. How can I test this program.
Please tell me how can I test this file.
Thanks
Balaprasad

Please download xml tools like XML SPY/ALTOVA/ COOKTOP.
YOu can test your XSL mapping using these tools.
Alternatively, you have to create a Interface mapping in XI, using your XSL mapping.
Then you can test using test TAB in the interface mapping.
cooktop download:
http://www.xmlcooktop.com/update/
Regards,
Ravi

How can I test my thunderbolt port? It's not working after the update to 10.10.1

I have been using my computer with the Thunderbolt Port for a while and after updating to 10.10.1 and after I while of using my computer I tried to use the thunderbolt port with my external monitor.. and it doesn't work at all.. video doesn't come out.. I tried a different screen with the mini adapter from thunderbolt to HDMI and another with thunderbolt to VGA and in both adapters I don't get video from my mac.
Any idea how can I test my Thunder bolt port?
This is what I have done:
1 cable adapter thunder bolt to mini HDMI to an LCD screen with HDMI : No video, but my computer detects that there is something connected
2 cable adapter thunder bolt to VGA to an LCD screen with VGA : No video, but my computer detects that there is something connected
3 cable adapter thunder bolt to mini HDMI to an 40' TV with HDMI : No video, but my computer detects that there is something connected
All the test pass from the Hardware test at the startup (press D at boot time).
Any ideas? my guarantee it's expired and no coverage. Due the nature of where the port it's installed, if this is a hardware problem seems that I will (may be) have to buy the Logic Board.. no good. No bueno!!
Thanks!!!

restore iPhone

HT201328 How can we test that our phone is unlocked after we restore our iPhone?

How can we test that our phone is unlocked after we restore our iPhone? I don't have access to another sim card at the moment. Only my AT&T sim card.

A sure way to check is to connect the phone to iTunes on your computer and click Restore iPhone (not Restore Backup). If the phone is unlocked near the end of the Restore iTunes will display "Congratulations. Your iPhone is unlocked."

How can I export slideshows created in Aperture v3.3.2 from Mid-2009 MacBook Pro-17 to blank DVDs?

(Fifth futile attempt in two hours, before I learned there was a Post webpage – I’m new to ApSuppCom - and after I learned that I am not allowed to update previous content, so I had to back out, make a few changes, and start over.) How can I export slideshows created in Aperture v3.3.2 (complete with superimposed captions and music tracks) from Mid-2009 MacBook Pro-17 to blank DVDs ? (Some other specs: Mac OS Lion 10.7.5; Capacity 499.5 GB; Processor 2.8 GHz Intel Core 2 Duo; Memory 4GB 1067 MHz DDR3; Graphics NVIDIA GeForce 9400M 256MB)
I cannot do a copy (export) without various error messages appearing and the inevitable stoppage occurring. Always with the DVD Video Player final message reading, “Supported disc not available.” Advisors and Mac Geniuses at local Apple Stores have told me to try Roxio Toast. When I visited the Roxio website, and found numerous other company products, the descriptions all seemed to suggest that most of the apps shown can easily export videos to DVDs, but nothing was said about finished digital slide shows being exported. At future events soon, I hope to be handing out these finished DVDs (free) to the people in them. Any help will be greatly appreciated. A.Z.

How can I export slideshows created in Aperture v3.3.2 (complete with superimposed captions and music tracks) from Mid-2009 MacBook Pro-17 to blank DVDs ?
Aperture cannot burn slideshows to a DVD. It only can export a video of your slideshow.
In Aperture 3 you use the "Export" button in Aperture's slideshow project to render a video to a folder on your disk.
Then you use iDVD or another program to burn a video DVD.
I cannot do a copy (export) without various error messages appearing and the inevitable stoppage occurring. Always with the DVD Video Player final message reading, “Supported disc not available.”
Could you please describe the exact steps that are causing these error messages?
How are you exporting your slideshow from Aperture? Which settings are you using? And how are you importing the video to iDVD or Toast to burn a video DVD?
For more suggestions see Karsten Schlüter's user tip: How to create a video-DVD? (Macs without iDVD)

How can i test my vpn connection?

so recently i decided to test if ver 1.3.0.3 of the quickvpn client would work better with the 1.3.0.5 rvs4000 firmware. i loaded quickvpn to an xp pro computer (freshly built, i might add) and got to work. in order to test the connection, i attempted to piggy back off an unsecured wireless network. this network is on the same ISP network as i am.
i use dynamic DNS, and the unsecured wireless network could resolve my IP correctly, but for some reason i couldnt connect to my home network from the unsecured network. my router is set to respond to lan requests, but i couldnt ping it. my router passes HTTP traffic to a computer in my network, but i couldnt bring up the webpage. finally, my router responds with the router config page over port 443, and i couldnt bring that up.
so i used my ISP's dialup service to test. initially, as always, i had a million problems with the vpn client. systematically, i tried to resolve the issues. i installed the patch in the readme for quickvpn. i checked log files to see where stuff was failing. eventually, i could connect to the VPN, but would get that "remote gateway is not responding" crap. i know of a (poor) workaround for this which allows you to "finalize" the connection, but that workaround doesnt allow you to ping around in your network. sometime later, after randomly messing with settings, the tunnel would connect without the workaround. i have no idea what "fixed" this.
despite all this, my 28.8Kbps connection wouldnt allow me to do anything meaningful on my network. i couldnt connect to the router or to a server of mine (http or fileshare). the only thing i could do was ping internal devices. other requests seemed to "hang" rather than timeout or do anything more concrete. basically, i gave up on testing using dialup, even though my router and the client software confirm a good connection. but i still wasnt convinced.
next, i figured i could create some type of "DMZ" on my network by placing a switch between my ISP's modem and my router. im not a cisco network professional by any means, but im pretty familiar with networking on a above-average level. that said, despite my best, i couldnt get my quickvpn computer to see my router from the "DMZ".
finally, i figured i could just test the tunnel while directly connected to my network's lan. bad idea. everything seems to go okay until it locks up on "activating policy". rebooting or otherwise ending the negotiation ends in the computer being unable to do anything anymore. when i try to ping anything, i get "negotiating ip security" ad infinitum. the only way i could fix this was by doing a system restore.
so here's the question: how can i test my quickvpn connection?why can't i just tunnel through my network? and before you scream that you can't, thegreenbow vpn client has NO PROBLEM connecting to my rvs4000 while connected to my own network.

Hi Aaron,
I am going exactly the same thing as you however, I had my cousin buy and install a RVS4000 at his house in Australia.
I access it from the USA so that I can help manage his Local Area Network, he is just not technical..
I setup a DDNS client on his RVS4000 so that I can always get to his Router via a domain name rather than a IP address.
I noticed that you didn't mention anything regarding importing client certificate into the directory of the VPN client on your PC.
I also noticed I disabled IPSec passthrough on the router in Australia, see the pictures below, not sure why, but the VPN client is working.
I also did not setup any gateway to gateway VPN tunnels, Only added a client , exported certificate as per the manual, See the last screen capture below.
You will also note if you view the screen captures that my cousins RVS4000 has not been upgraded to the new code.Is there a reason for that...not really...he's just a user, not really technical. Also note I have not added any VPN tunnels on my RVS4000.
I have a reasonably reliable connection between the USA and Australia. I didn;t have to play with any other options, just add users to the VPN client database.
Your description of the working environment of your PC is missing details on the version of XP, so i will mention the following taken from the software release notes of the RVS4000 ;
There is a known issue with Windows XP SP2 Firewall.
ICMP packets are always dropped by the firewall when the firewall is enabled.
This issue causes the QuickVPN client to be unable to establish a tunnel with the remote QuickVPN server successfully.
Microsoft has released a patch to fix this issue, which you can get from:
http://support.microsoft.com/kb/889527/en-us
After you install the patch, the issue should be resolved. You can also fix this issue by upgrading Windows XP to SP3.
You cannot plug a PC on the same network as the router for testing, they must be on dissimilar WAN networks for testing purposes.
Your remote PC VPN client will not be allocated a IP address in the RVS4000's network, hosts behind the RVS4000 will still respond to pings, as they direct the responses to their default gateway, the RVS4000.
The thegreenbow VPN client is a distracter at this point costing 50 something EURO for a license, lets try to get the quickVPN client working !
So, if you still wish try the following, firstly make sure your XP has been upgraded to SP3;
1. If you upgraded your router to the new version of code, then reset your router to factory defaults to re-initialize your router, yes start again.
2. Export the VPN client certificate to the directory that contains the VPN client. In my case it is;
"C:\Program Files\Cisco Small Business\QuickVPN Client"
3. add a VPN client account to the router
4. Use port 60443 from the quickVPN client. and try VPNing to the router.
5 hmmm, if the client still fails try disabling IPSec Passthrough on the router for grins and giggles.
If this fails, call the SBSC at the following location for resolution;
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
good luck ...regards Dave

How can i save the error message?

In the execution of the integration process, and i get
the mapping error as follow:
RuntimeException in Message-Mapping transformation: Exception:[java.lang.IllegalArgumentException: Cannot cast to float. ] in class com.sap.aii.mappingtool.flib3.Stat method sum[com.sap.aii.mappingtool.flib3.Plainer@dddd08]
Now what i want is to save this message.
How can i save this message?
Thank you for your advise and reading

Hi,
An exception name is just any string, like, "timeout"
You usually have a control step, which waits for somethime (say a minute) and then transfers the control to exception handler, who handles the exception.
but i dont know from where i get the exception?
It not required for us to know from where the exception is raised as long as you have created an exception handler.
The integration process, will search for the required exception handler and execute it. Make sure, that the exception handler is in one of the branches of the block.
Hope this helps.
Regards,
Smitha.

How can I test for the bas unit enterd in a control?

How can I to create a polymorphic vi where the user can enter either volume or temperature.
how can Labwiev test for the base unit entered
pseudocode example:
input X
if X.base_unit == m^3 do .......
thanks for any suggestion to resolve or avoid my problem
Solved!
Go to Solution.

Hi schaerm,
you have to dig deeper.
An idea is this one:
The red marked word is containing the unit - in a coded way. Somewhere in the LV help you can find the description of this coding (I remember a chapter on memory representations of all LV datatypes...). (There surely is an easier or better way - but the example is done quic&dirty.)
You can also format the number into a string and analyze the unit here...
Message Edited by GerdW on 02-07-2010 07:21 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Repeate Message after RuntimeException in Message-Mapping transformation

Hello Experts,
I have a mapping defined with a UDF. In the mapping editor the tests were successfull but in the reale world - of course not
Now I have a message in the Integration Server with red flag because of
com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /LIST/S_UNB/S_UNH/G_SSG18/S_GID/C_C213/D_7224. The message is: Exception:[java.lang.NumberFormatException: For input string: "__cC_"]
I've located the error in the UDF and want to repeate the message with the new mapping. But again the same error although the test in the mapping tool (with the original payload) was successfull.
It must be possible to repeate those messages but how?
Thanks a lot.
Christian

This was a little bit strange. But after the import, the version of the mapping in PROD was different from TEST.
I've changed the description Field of the Mapping in Test, activated the version and did the export/import again. Now the versions were the same and after repeating the message everything is o.k.
THANKS ALL FOR YOUR HELP!
Christian

How can I delete a system message?

Hi,
how can I delete a system message which I have created in the Integration Builder Configuration in the menue bar "tools--> send system message?
Thanls for your help.
Regards
Stefan

Hi,
I'm not sure in which XI SP version
but when I tested it only the whole XI restart could help
but this was rather a long time ago
and since then I try not to use this system message:)
Regards,
michal

The new ios7 is horrible how can i downgrade? my messages keeps freezing im frustrated im very close to going ANDROID any one can help how do i get in touch with apple directly?

the new ios7 is horrible how can i downgrade? my messages keeps freezing im frustrated im very close to going ANDROID any one can help how do i get in touch with apple directly?

gorxxx83 wrote:
the new ios7 is horrible how can i downgrade? my messages keeps freezing im frustrated im very close to going ANDROID any one can help how do i get in touch with apple directly?
Downgrading is not supported.
Here are some basic troubloeshooting tips:
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.
If you want to contact Apple directly, call 1-800-MYAPPLE (1-800-692-7753), or go to getsupport.apple.com.
Don't waste your time asking for a downgrade of the iOS. That's not an option.

How can I use After Effects filters on a whole sequence without getting stuck in After Effects?

It appears that, with the options that are visible to the user, Dynamic Link only goes one-way and can't make round trips from Premiere Pro to After Effects and back again. If I send a sequence to After Effects, that part works fine and I can do what I want and save the comp. However, even though the comp appears as an asset in Premiere Pro, I am not allowed to do anything with it. If I try to drag it to a new sequence, it just says no. If I click "Create Sequence from Clip" it creates an empty sequence.
So how can I use After Effects on whole sequences/tracks instead of just on a clip-by-clip-by-clip-by-clip-by-clip basis? is this possible? For instance, if I have a whole sequence where I've neutralized the white balance, I might want to apply a warming filter to the whole thing as a unit. That would be really painful with even a few clips to keep doing that again and again, and if you want to modify it slightly you have to do it over and over. If there is a way to do that through Dynamic Link through some hidden option, what happens with the audio? Would I have to cut it out of the lower sequence and paste it into the higher sequence with the After Effects comp as a video track?

I'm not an Adoby guy, hence you may ignore my reply, but Adobe Dynamic Link is obviously not just one way ticket and in most cases works just fine.
You have already been explained by J-MS and tclark513 how to properly use it and which pitfalls may occur.
So as to apply an effect onto a whole sequence or a group of clips you need to either nest them in PrPro or pre-compose them in AE. Then just apply an effect (or several ones) onto that composition.
So, if you nest clips in PrPro, select your nested sequence in the timeline, right-click and choose 'Replace with After Effects Composition'. Done! Your dynamically linked AE composition is in the right place in your timeline and in your Project panel as well. If you can not treat it as an ordinary footage, there are obviously some mistakes in your workflow.
If you didn't nest your sequence or a group of clips in PrPro before replacing them with AE composition, you may easily do it within AE. Just select all the layers in AE composition and choose Layer -> Pre-compose... (Ctrl/Cmd+Shift+C) Done! Switch back to your Master comp and apply your desired effect(s)
You may loose some effects or/and transitions while travelling from PrPro to AE via Adobe Dynamic Link, whereas you don't while travelling back
(If you start building your AE composition from scratch right in AE and then need to import it into PrPro, DO NOT export one as PrPro project out of AE, but rather choose Adobe Dynamic Link -> Import After Effects Composition... within PrPro)
P.S. And yes, submit a feature-request so that Adobe will convert 'Transparent Video' into fully functional 'Adjustment Layer'.

When I turn on messages, I can't see my messages. All I can see is a screen with horizontal lines and a text list of addresses. How can I get the regular message screen back?

When I turn on Messages, I can't see my messages. All I can see is a screen with horizontal lines. How can I get the regular Messages screen back?

The same is happening for me. Today I decided to reboot my PC because it was acting up a bit, go figure, and then for some reason at the same time the PC was restarting my macbook froze. I had to do a reboot with the restart button but then all that came up was a gray background and in the middle of the screen was a darker gray folder with a white question mark in the middle of it, blinking. I can't imagine why the restart would've affected my macbook. After finding information on how to fix this, I tried all of the steps that were given about using the mac OS X disk to use the first aid utility to fix it. When using the Disk Utility option whenever I select my hardrive and am in the First Aid tab, the only button I can use is the Verify Disk Permissions. The other three buttons, and namely the most important Repair Disk button, is/are not selectable (grayed out). I then tried resetting the PRAM the way they also said with the command + option + P + R and waited for the second startup sound. After that I gave the Disk Utility a second try, but still nothing. And now if I try to just reinstall the OS completely I can't even select a destination volume on the third step (Select Destination). Apparently this means i'm SOL.

How can i test if i'm in the EOF of my file text in applescript?

hello
i want to known how can i test my EOF of my file text or if i meet "Plan N°" when i read each linesdxhezdcxezkchcochzhejc
my file text :
Plan N°1
94.64%
MDF_280;;3050;1850;1
piece;0;0;500;500;0;AAA
piece;0;504;500;500;0;AAA
piece;0;1008;500;500;0;AAA
piece;0;1512;500;500;0;AAA
piece;0;2016;500;500;0;AAA
piece;0;2520;500;500;0;AAA
chute;0;3024;26;500
piece;504;0;500;500;0;AAA
piece;504;504;500;500;0;AAA
piece;504;1008;500;500;0;AAA
piece;504;1512;500;500;0;AAA
piece;504;2016;500;500;0;AAA
piece;504;2520;500;500;0;AAA
chute;504;3024;26;500
piece;1008;0;500;500;0;AAA
piece;1008;504;500;500;0;AAA
piece;1008;1008;500;500;0;AAA
piece;1008;1512;500;500;0;AAA
piece;1008;2016;500;500;0;AAA
piece;1008;2520;500;500;0;AAA
chute;1008;3024;26;500
piece;1512;0;700;300;1;BBB
piece;1512;704;700;300;1;BBB
piece;1512;1408;700;300;1;BBB
piece;1512;2112;700;300;1;BBB
chute;1512;2816;234;300
chute;1816;0;3050;34
Plan N°2
93.58%
MDF_280;;3050;1850;1
piece;0;0;300;700;0;BBB
piece;0;304;300;700;0;BBB
piece;0;608;300;700;0;BBB
i want test
i : line 1 ok next
i <- 94... ok -< next
if i == MDF_280 => loop (exit while EOF or when i == Plan N°)
do ....
end loop
soory but i'm novice in apple script
and i'm french
i need to improve my english
this is my applescript
repeat with l in lesLignes
if (l as text) starts with "MDF_280" then
while ???? (!= EOF or "MDF_280") do ....
if (l as text) starts with "piece" then .....
end if
end if
end repeat
THANKS

property sString01 : "Plan N" -- String to search for.
property sString02 : "MDF_280" -- String to search for.
set uFile to (choose file) -- Select file to process.
set tText to read uFile -- Read contents of selected file.
repeat -- Cycle through contents of 'tText'.
set {offset01, offset02} to {offset of sString01 in tText, offset of sString02 in tText} -- Obtain offset locations of 'sString01' and 'sString02'.
if (offset01 = 0) then exit repeat -- If 'sString01' does not exist, exit repeat loop.
-- Adjust content of 'tText' as to position of 'offset02' relative to 'offset01'.
if (offset02 > offset01) then set tText to get (characters (offset02 + (count sString02)) through (count tText) of tText) as string
set offset01 to (offset of sString01 in tText) - 1 -- Obtain next offset of 'String01'.
if (offset01 < 1) then set offset01 to (count tText) -- Correct 'offset01' to obtain remaining contents of 'tText'.
set tmpText to get (characters 1 through offset01 of tText) as string -- Obtain subset content of 'tText' - between 'sString02' and next 'sString01', of end of 'tText'.
display dialog tmpText -- Display obtain subset of content of 'tText'.
end repeat
Since you posted 'how can i read a file text by applescript', and have not replied to others posts; nor marked any reply as 'answered' or even 'helpful'; and, I anticipate you creating a new post asking how to incorporate one of the 'how can i read a file text by applescript' replies into the above (or similar) code - a revised version of 'how can i read a file text by applescript' incorporated within the above code is provided below.
property sString01 : "Plan N" -- String to search for.
property sString02 : "MDF_280" -- String to search for.
property sString03 : "piece" -- String to search for.
property sString04 : "chute" -- String to search for.
set uFile to (choose file) -- Select file to process.
set tText to read uFile -- Read contents of selected file.
repeat -- Cycle through contents of 'tText'.
set {offset01, offset02} to {offset of sString01 in tText, offset of sString02 in tText} -- Obtain offset locations of 'sString01' and 'sString02'.
if (offset01 = 0) then exit repeat -- If 'sString01' does not exist, then exit the repeat loop.
-- Adjust content of 'tText' as to position of 'offset02' relative to 'offset01'.
if (offset02 > offset01) then set tText to get (characters (offset02 + (count sString02)) through (count tText) of tText) as string
set offset01 to (offset of sString01 in tText) - 1 -- Obtain next offset of 'String01'.
if (offset01 < 1) then set offset01 to (count tText) -- Correct 'offset01' to obtain remaining contents of 'tText'.
set tmpText to get (characters 1 through offset01 of tText) as string -- Obtain subset content of 'tText' - between 'sString02' and next 'sString01', of end of 'tText'.
set tPars to paragraphs of tmpText -- Obtain list of 'piece' entries.
repeat with i in tPars -- Cycle through list.
if (i begins with sString03) then
set {var01, var02, var03, var04, var05, var06} to my handle_List(i) -- Obtain individual values.
-- Your code here.
display dialog ("Piece: " & var01 & " ... " & var02 & " ... " & var03 & " ... " & var04 & " ... " & var05 & " ... " & var06) -- Code sample.
else if (i begins with sString04) then
set {var01, var02, var03, var04} to my handle_List(i)
-- Your code here.
display dialog ("Chute: " & var01 & " ... " & var02 & " ... " & var03 & " ... " & var04) -- Code sample.
end if
end repeat
end repeat
on handle_List(localList) -- Extract values, from each line of data, and place into a list.
set {oAStid, AppleScript's text item delimiters} to {AppleScript's text item delimiters, ";"}
set tItems to text items 2 through -1 of localList
set AppleScript's text item delimiters to oAStid
return tItems -- Return a list of values.
end handle_List

How can I test my Query As A Web Service?

Hi,guru:
    I have created my Web Service based on universe which based on SAP BW query using Query As A Web Service Designer, but when I use it in Dashboard on BOBJ platform by passing a parameter to the Web Service, it seems no response from the Server,I made 2 test steps:
    1.Pass a value to the input parameter,I checked by ST01 in BW Server and see no records of the action, and no result return.
    2.Pass a blank to the input parameter,I checked by ST01 in BW Server and got many records,and all data be retrived.
    It seems that when I passed the parameter,the Web Service seems no response and didn't run at all. Is there anybody who can tell me how can I test the Web Service,I want to test it and input my parameter.
    Thanks very much for your quick response.
Best Regards
Martin Xie

Hi Martin,
Check the following link which might be helpful:
1657208 - "No object returned; you either have not put objects in the result pane or your query is incorrect" when using QAAWS and KEYDATE variable in BI4.x
How to use Prompt in xcelsius of BIWS
Regards,
Noopur

How can i test after creating Message mapping transformations

Similar Messages

Maybe you are looking for