How can I test the throughput speed of the router?

How do I test the data speed of my Airport Extreme base? I want to test the functioning my airport extreme base. I experience frequent slowdowns and stoppages that don't occur when i access the cable modem directly.

To test data throughput of your AirPort (or any router) you would need to test both the WAN-to-LAN and LAN-to-WAN interfaces. A typical way to do this would be to use a utility like ixChariot.
For example, SmallNetBuilder has already done this with several different versions of the 802.11n AirPort Extreme Base Station (AEBSn). You may want to check them out to get an idea of what the AEBSn is capable of.
Another approach that is commonly used but not as accurate is to use "end-to-end" throughput testing utilities that are readable available from the Internet, like Speedtest.net.
Regardless of which technique you use, it is important to test throughput at each of your network segments to help pinpoint where the bottlenecks are. For example, if you do HD video streaming on your local network, you would want to test the throughput between the HD video source and the playback device.

Similar Messages

How can i test if i'm in the EOF of my file text in applescript?

hello
i want to known how can i test my EOF of my file text or if i meet "Plan N°" when i read each linesdxhezdcxezkchcochzhejc
my file text :
Plan N°1
94.64%
MDF_280;;3050;1850;1
piece;0;0;500;500;0;AAA
piece;0;504;500;500;0;AAA
piece;0;1008;500;500;0;AAA
piece;0;1512;500;500;0;AAA
piece;0;2016;500;500;0;AAA
piece;0;2520;500;500;0;AAA
chute;0;3024;26;500
piece;504;0;500;500;0;AAA
piece;504;504;500;500;0;AAA
piece;504;1008;500;500;0;AAA
piece;504;1512;500;500;0;AAA
piece;504;2016;500;500;0;AAA
piece;504;2520;500;500;0;AAA
chute;504;3024;26;500
piece;1008;0;500;500;0;AAA
piece;1008;504;500;500;0;AAA
piece;1008;1008;500;500;0;AAA
piece;1008;1512;500;500;0;AAA
piece;1008;2016;500;500;0;AAA
piece;1008;2520;500;500;0;AAA
chute;1008;3024;26;500
piece;1512;0;700;300;1;BBB
piece;1512;704;700;300;1;BBB
piece;1512;1408;700;300;1;BBB
piece;1512;2112;700;300;1;BBB
chute;1512;2816;234;300
chute;1816;0;3050;34
Plan N°2
93.58%
MDF_280;;3050;1850;1
piece;0;0;300;700;0;BBB
piece;0;304;300;700;0;BBB
piece;0;608;300;700;0;BBB
i want test
i : line 1 ok next
i <- 94... ok -< next
if i == MDF_280 => loop (exit while EOF or when i == Plan N°)
do ....
end loop
soory but i'm novice in apple script
and i'm french
i need to improve my english
this is my applescript
repeat with l in lesLignes
if (l as text) starts with "MDF_280" then
while ???? (!= EOF or "MDF_280") do ....
if (l as text) starts with "piece" then .....
end if
end if
end repeat
THANKS

property sString01 : "Plan N" -- String to search for.
property sString02 : "MDF_280" -- String to search for.
set uFile to (choose file) -- Select file to process.
set tText to read uFile -- Read contents of selected file.
repeat -- Cycle through contents of 'tText'.
set {offset01, offset02} to {offset of sString01 in tText, offset of sString02 in tText} -- Obtain offset locations of 'sString01' and 'sString02'.
if (offset01 = 0) then exit repeat -- If 'sString01' does not exist, exit repeat loop.
-- Adjust content of 'tText' as to position of 'offset02' relative to 'offset01'.
if (offset02 > offset01) then set tText to get (characters (offset02 + (count sString02)) through (count tText) of tText) as string
set offset01 to (offset of sString01 in tText) - 1 -- Obtain next offset of 'String01'.
if (offset01 < 1) then set offset01 to (count tText) -- Correct 'offset01' to obtain remaining contents of 'tText'.
set tmpText to get (characters 1 through offset01 of tText) as string -- Obtain subset content of 'tText' - between 'sString02' and next 'sString01', of end of 'tText'.
display dialog tmpText -- Display obtain subset of content of 'tText'.
end repeat
Since you posted 'how can i read a file text by applescript', and have not replied to others posts; nor marked any reply as 'answered' or even 'helpful'; and, I anticipate you creating a new post asking how to incorporate one of the 'how can i read a file text by applescript' replies into the above (or similar) code - a revised version of 'how can i read a file text by applescript' incorporated within the above code is provided below.
property sString01 : "Plan N" -- String to search for.
property sString02 : "MDF_280" -- String to search for.
property sString03 : "piece" -- String to search for.
property sString04 : "chute" -- String to search for.
set uFile to (choose file) -- Select file to process.
set tText to read uFile -- Read contents of selected file.
repeat -- Cycle through contents of 'tText'.
set {offset01, offset02} to {offset of sString01 in tText, offset of sString02 in tText} -- Obtain offset locations of 'sString01' and 'sString02'.
if (offset01 = 0) then exit repeat -- If 'sString01' does not exist, then exit the repeat loop.
-- Adjust content of 'tText' as to position of 'offset02' relative to 'offset01'.
if (offset02 > offset01) then set tText to get (characters (offset02 + (count sString02)) through (count tText) of tText) as string
set offset01 to (offset of sString01 in tText) - 1 -- Obtain next offset of 'String01'.
if (offset01 < 1) then set offset01 to (count tText) -- Correct 'offset01' to obtain remaining contents of 'tText'.
set tmpText to get (characters 1 through offset01 of tText) as string -- Obtain subset content of 'tText' - between 'sString02' and next 'sString01', of end of 'tText'.
set tPars to paragraphs of tmpText -- Obtain list of 'piece' entries.
repeat with i in tPars -- Cycle through list.
if (i begins with sString03) then
set {var01, var02, var03, var04, var05, var06} to my handle_List(i) -- Obtain individual values.
-- Your code here.
display dialog ("Piece: " & var01 & " ... " & var02 & " ... " & var03 & " ... " & var04 & " ... " & var05 & " ... " & var06) -- Code sample.
else if (i begins with sString04) then
set {var01, var02, var03, var04} to my handle_List(i)
-- Your code here.
display dialog ("Chute: " & var01 & " ... " & var02 & " ... " & var03 & " ... " & var04) -- Code sample.
end if
end repeat
end repeat
on handle_List(localList) -- Extract values, from each line of data, and place into a list.
set {oAStid, AppleScript's text item delimiters} to {AppleScript's text item delimiters, ";"}
set tItems to text items 2 through -1 of localList
set AppleScript's text item delimiters to oAStid
return tItems -- Return a list of values.
end handle_List

How can I maximize my wifi speed using the Time Capsule?

I do not feel that my wifi speed is as fast as it should be. I have a 2 TB Time Capsule and connect wirelessly with an Apple MacBook Air, an iPhone 5s, an iPad 4, and iPad mini. The online manual just tells how to do the initial setup but not how to tweak the settings. Any idea how I can check my settings?

There's little if anything to tweak. Your wireless speed will depend upon how many devices are using it at the same time since it is shared bandwidth. Wireless is also affected by what's between the device and the router like walls, ceilings, and other obstructions. If you have two devices connected at the same time one of which only supports 802.11a/b connections and one that supports and another that uses 802.11a/b/n (faster), then your network speed will drop down to the speed of the slowest device connected.
Just use it. There's little you can do unless you have defective hardware.

How can I test a NT service from the outside process?

We have an application that have an unknown problem (we actively search at this moment). The problem is such that the service associated with it seem to "freeze". The application is not responding to any demand (jsp,rmi) and the logs are not coherent BUT the service is up and running... )-:
Is there a way in java that I can test if an NT service is'nt fully fonctional?
My other option is to create an small java application (thread) who ask for the login page (login.jsp) after an X time interval. If the login page is returned correctly (HTTP OK), it's ok (sleep). Otherwise, I need to restart the service.
Is the a way to stop and start an NT Service from my application?
Thank's a lot, your help will be VERY appreciated.
A friend really in trouble

Is the a way to stop and start an NT Service from my
application?Sure. Figure out what you would type at the command line to do that (something like "NETSTART Something") and use Runtime.getRuntime().exec() to execute that command.

How can I test my thunderbolt port? It's not working after the update to 10.10.1

I have been using my computer with the Thunderbolt Port for a while and after updating to 10.10.1 and after I while of using my computer I tried to use the thunderbolt port with my external monitor.. and it doesn't work at all.. video doesn't come out.. I tried a different screen with the mini adapter from thunderbolt to HDMI and another with thunderbolt to VGA and in both adapters I don't get video from my mac.
Any idea how can I test my Thunder bolt port?
This is what I have done:
1 cable adapter thunder bolt to mini HDMI to an LCD screen with HDMI : No video, but my computer detects that there is something connected
2 cable adapter thunder bolt to VGA to an LCD screen with VGA : No video, but my computer detects that there is something connected
3 cable adapter thunder bolt to mini HDMI to an 40' TV with HDMI : No video, but my computer detects that there is something connected
All the test pass from the Hardware test at the startup (press D at boot time).
Any ideas? my guarantee it's expired and no coverage. Due the nature of where the port it's installed, if this is a hardware problem seems that I will (may be) have to buy the Logic Board.. no good. No bueno!!
Thanks!!!

restore iPhone

How can I test a RTP(send&receive) application on the same computer?

I an writing an application that lets one computer (A) sends a media file to another computer (B) and B receives it and play it.
But how can I test this application on the same computer
Eg.Transmitter: localhost 43000
Receiver: localhost 43000
It will retuen an error since the port number is alreeady used by another program.
I know if I test it on different computers, it should be fine, but how can I test it on the same computer?

JMStudio sends RTP packets from the same UDP port as the specified in the destination port, so you can't try it in the same computer. The examples provided in http://java.sun.com/products/java-media/jmf/2.1.1/solutions/index.html follow this rule aswell, but it's easy to modify it:
rtpMgrs[streamid]=RTPManager.newInstance();
localAddr = new SessionAddress( InetAddress.getLocalHost(),localDataPort);
//By deafault, in the examples, they use remote DataPort instead of localDataPort.
//You can specify localDataPort to any different free port number, or to
//SessionAddress.ANY_PORT if you don't mind the port number
remoteAddr = new SessionAddress(destIpAddr,remoteDataPort);
rtpMgrs[streamid].initialize(localAddr);
rtpMgrs[streamid].addTarget(remoteAddr);

How can you test the video card?

I just got a cinema display and I am having trouble calibrating it.
I just notice that when I open up bridge CS4 it takes awhile for it to refresh. When I go to film strip view and click on a picture it will not diplay it.
Then I change views and there is a line down the middle of the display where it gets update but the left side does not.
Any thoughts on what it could be?
Video card of is it the monitor?
How can I test it?

The only ways I can think of to test the card are XBench and the Apple Hardware Tests (insert Install DVD and restart while holding down 'd')

How can I test for the bas unit enterd in a control?

How can I to create a polymorphic vi where the user can enter either volume or temperature.
how can Labwiev test for the base unit entered
pseudocode example:
input X
if X.base_unit == m^3 do .......
thanks for any suggestion to resolve or avoid my problem
Solved!
Go to Solution.

Hi schaerm,
you have to dig deeper.
An idea is this one:
The red marked word is containing the unit - in a coded way. Somewhere in the LV help you can find the description of this coding (I remember a chapter on memory representations of all LV datatypes...). (There surely is an easier or better way - but the example is done quic&dirty.)
You can also format the number into a string and analyze the unit here...
Message Edited by GerdW on 02-07-2010 07:21 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How can I test the HBA driver?

Hi. I'm a graduate student majoring in Computer Science.
I'm interested in writing driver drivers, especially SCSI driver driver. I modified HBA driver and compiled. but I don't know how to test it
To my thinking because HBA driver is automatically loaded when boot, I can't replace it with my driver. Is it right?
How can I test it ? Is kenel compiled with new driver???
Thank you in advance.

HBA driver is a loadable module and it is HBA-specific, i.e. it is written for a particular type of the controller hardware. It is not clear, if you have modified a driver for you boot device controller of some other HBA. Do not replace your original driver used for booting - you may not boot you system! You may add to your system the HBA for which your new driver is written and then debug it on a live system.
You will find a lot of information about driver development and debugging in the on-line manual "Writing Device Drivers" posted on http://soldc.sun.com/developer/support/driver/IO_kit/PCI.html web page.

How can i test the boolean state of button action?

Hello,
in as2.0, how can i test the boolean value if a button was
pressed or not?
I have a simple function im trying to work with like this...
button_btn.onRelease = function (success:Boolean) {
if (success) {
trace("we pressed the button - value is true");
else {
trace("value is false");
working with booleans in this way is new to me - any pointers
will do - thanks!

Well, I'm not really that familiar with using video in flash,
but from what I understand of what you are going for, these are my
suggestions:
If the code within your button has scope of the variable you
are testing for:
_global.myInfoObject;
button_btn.onRelease = function(){
if( myInfoObject.code == (value your are testing for) ) {
trace("value is correct);
} else {
trace ("value incorrect");
if you aren't in scope you can always maybe forward the
onRelease function to some handler that is in scope:
var myInfoObject;
var release = function(){
//to do code here;
button_btn.onRelease = release;
I hope some of these ideas help a little.
You can always send your .fla to my email at
[email protected] and I'll take a look at it.

HT202213 Why would my Apple TV suddenly stop recognizing my library. Nothing has changed. How can I test the Apple TV. I have the latest updates.

Why would my Apple TV suddenly stop recognizing my library. Nothing has changed. How can I test the Apple TV. I have the latest updates.

Could have to do with home sharing. Try turining off and then back on home sharing on your AppleTV.

How can we test the camera megapixel?

Hi All,
I need to know how can we test the camera megapixel?
For instance: If i have a 2MP camera how would i test it is 2MP, is there any measurement device or standards for mega pixel?

1600 x 1200 is 2mp not 1.3. Your friends phone must also be 2mp or the picture was taken on another phone.
It's easy to work out yourself.
1600 multiplied by 1200 = 1,9200,000 pixels more commonly known in the industry as 2mp.
1.3mp is 1280 x 960 (1,228,800 pixels).
More megapixels does not always equal better quality. The lens and software are also a big quality factor. I have seen many 1.3mp phones that take better pictures than a 2mp phone because they have a better lens.
Message Edited by psychomania on 18-Jul-2008 10:26 AM

HT5245 How can I test a iPhone or any device before come out to the stores

How can I test a iPhone or any device before come out to the stores

Also, if you mean test it in terms of the carrier you will have the normal trial period for the carrier to test signal and reception and such ifyou are signing up for new service (or a new contract term). AT&T is 30 days to return or exchange the phone if it does not work where you need it to work. I don't know about Verizon or Sprint these days, but it will be at least two weeks, if not 30 days as well.

How can I test the log in state from in side the Operator Interface code.

From inside LabVIEW Full OI, I want to test if the operator logged in after the IApplicationMgr Start.
Right after the IApplicationMgr ‘Start’ I have a loop that tests the IApplicationMgr ‘LoginLogoutRunning’ state and waits until the LoginLogout call back is done.
I want to exit if the program if operator canceled the login and did not log in.
I have tried “GetEngine” ref. From there get the “CurrentUser” ref but seems not to contain any information about the Current User.
How can I test from my Operator Interface code logged in state of the application?
Thanks
Jim D.

Try Engine.CurrentUserHasPrivilege
For the string parameter 'privilegeName' enter Priv_UserLoggedIn or the string value "*".
"Priv_UserLoggedIn–(Value: "*") Use this value with the Engine.CurrentUserHasPrivilege method to determine whether a user is logged in."
Option 2: You could also setup a callback on application manager for UserChanged Event. If the User is null then the login was canceled. (see a copy of the help further down)
From the teststand help for Engine.CurrentUserHasPrivilege method below...
CurrentUserHasPrivilege Method
Syntax
Engine.CurrentUserHasPrivilege ( privilegeName)
Return Value
Boolean
True if the current user has the privilege.
Purpose
Confirms whether the current user or any user group that the user is a member of has a specific privilege.
Remarks
Returns True when the privilege property is True, when the privilege property of any group that contains the privilege is True, or when privilege checking is disabled, StationOptions.EnableUserPrivilegeChecking is False. If privilege checking is disabled but StationOptions.RequireUserLogin is True, this function returns True only if there is a user currently logged on.
Parameters
privilegeName As String
[In] Specifies the name of the privilege to check. You can specify the name of any privilege property. You can specify the full privilege path in the user privileges property tree, for example, Debug.RunSelectedSteps, or you can specify the base privilege name, RunSelectedSteps. If you specify only the base privilege name and more than one instance of the base privilege name exists, then the method returns the value of the first base privilege it finds with that name. Refer to UserPrivileges for more information.
Teststand callback for UserChanged Event...
UserChanged Event
Syntax
ControlName_UserChanged ( user)
Applies To
ApplicationMgr
Purpose
Occurs when the current user logged in changes.
Remarks
Use this event to update the parts of your user interface that depend on user permissions when the current user logged in changes.
Parameters
user As User
[In] Current user. If this parameter is NULL, there is no user logged in.

HT5953 How can I speed up the "start speaking" feature in iBooks? (System Preferences Dictation and speech does not do anything to the speech speed.) The rate is a bit to slow.

How can I speed up the "start speaking" feature in iBooks? (System Preferences Dictation and speech does not do anything to the speech speed.) The rate is a bit to slow.

Hi, I had the same problem you described, and I noticed that there are two ways of activating text to speech on iBook for Mac, with different speed results (at least on my MacBook Pro Retina display)
On your iBook you can select the text and and then click on > More> Start speaking, and you will get a certain speed, which tends to be too slow.
But you will get the speed you had selected with "Go to System Preferences>Dictation and Speech>Text to speech. In there is a slider to adjust the speaking rate." if you use the TOP MENU (next to the black apple) under Edit>Speech>Start Speaking. I also learned that under System Preferences>Dictation and Speech>Text to speech, there is an option for a shortcut which is very helpful. And you can change Key. Hope this was helpful.

How can I test the throughput speed of the router?

Similar Messages

Maybe you are looking for