How can I to define permission in Task States- Designer Studio 3.1.4

Hello, Can anybody help me please.
Tools: OSM 7,Designer Studio 3.1.4
The problem:
My flow there is a lot of parallel task and my enterprise need that task state can be change for state Suspenso.(my custon task state) when the user chooses the status "pendencia" (my custon status) in the flow. When the task to reach the state "Suspenso" the user can not to change it for other state, only a specific Role (Interrupcao) can to change it for other state. I need that my task has in your state the possibility to define permission for each Role like the order has. In the order I can to define, for each transition of states (Aborted, Cancelled, In Progress, Suspended ...), which Role can to change the state of her - Order Lifecycles Policy.
Any idea??
Tanks!!!!

Order lifecycle policy governs the order states, not task states.
The user that is assigned to the task is capable of moving it into any state - there is no ability to restrict this to a role for a given state.
Brian.

Similar Messages

How can i able to see the Task in CWB Administrator page

Hi Everyone,
Hope everybody is doing fine !
Here i'm requesting for help in CWB administrator setup, i have done the CWB setup as required like;
1. Defined Plan Years
2. Defined Life Event Reasons.
3. Defined Plan Type.
4. Defined Plan. (4.1. Defined Task within Compensation Workbench Tab)
5. Defined Plan Enrollment Requirements.
6. Defined Standard Rates.
7. Run Program "Participation Process: Compensation Workbench"
8. Found require employees processed sucessfully from log.
9. Loged in as Manager/Administrator > Open Compensation Workbench Administrator page
10. Found message "There is no Task for Employee"
So could anybody please help me, how can i able to see the task work sheet in CWB administrator page.
Regards
AshokP

Hi Avinash,
Thanks For Your Response,
I have created task in Plan window (Navigate to Details > Compensation Workbench (Select Task Type) with Full Access.
So could you please advise me, whether i'm skipping any step as you have been stated like Task needs to be define under 'Plan Enrollment Requirement Window'
Thanks
AshokP

How can I pre-define the default selection in a SelectOneChoice?

How can I pre-define the default selection in a SelectOneChoice?
(1) Here's my JSF-code:
<af:selectOneChoice label="#{res['usercreate.input.sex']}"
value="#{bindings.Sex.inputValue}"
binding="#{SelectListBean.sexlist}"
readOnly="false" autoSubmit="false">
<af:selectItem label="#{res['data.sex.women']}" value="1"/>
<af:selectItem label="#{res['data.sex.man']}" value="2"/>
</af:selectOneChoice>
(2): manged bean: to set the default value to be the first in the list, my managed bean as follows:
import oracle.adf.view.faces.component.core.input.CoreSelectOneChoice;
public class MBSListBean {
private CoreSelectOneChoice sexlist;
public MBSListBean() {
public void setSexlist(CoreSelectOneChoice sexlist) {
this.sexlist = sexlist;
this.sexlist.setValue(1);
public CoreSelectOneChoice getSexlist() {
return sexlist;
(3) when i launch the page, it often gives me such warnings:
WARNUNG: Could not find selected item matching value "1" in CoreSelectOneChoice[UIXEditableFacesBeanImpl, id=_id7]
how to solve the problem ?
Thanks,
wzzdx

You could also set the default on your entity or viewobject, in the properties of your attribute.

HT4437 I want to develop a software with AirPaly service for business things. How can I get the permission from Apple?

I want to develop a software with AirPaly service for business things. How can I get the permission from Apple?
This one is used in Windows laptop, and I want it support AirPlay service, but Apple doesn't publish the AirPlay protocol.
Many thanks.

Create a developer account, then access he developers forums and see if you can find the information that way
The other option would be to simply contact Apple directly.

How can I sync my Microsoft Outlook tasks with my Ipad reminders? I dont want to use Icloud or an exchange

How can I sync my Microsoft Outlook tasks with my Ipad reminders? I dont want to use Icloud or an exchange

Plug it into your computer. Tell it to sync with "this computer" instead of iCloud. You shouldn't have to remove any apps. Otherwise, you can save the app data by using i-FunBox ( http://www.i-funbox.com/ ) just go to the "devices" tab and select 'user applications' and select all of your apps and tell iFunBox to "copy to pc" you're done! You have them all backed up.

How can a type defined in a PL/SQL package be used by an object?

How can a type defined in a PL/SQL package be used by an object?
In the PL/SQL Reference manual it says that object attributes can be
types defined inside a PL/SQL package: How do you make this work?
Here is a sample that demonstrates what I am trying to do:
CREATE OR REPLACE
PACKAGE Phone IS
TYPE Phone_rectype IS RECORD (
Main VARCHAR2(12),
Home VARCHAR2(12),
Business VARCHAR2(12),
Mobile VARCHAR2(12),
Fax VARCHAR2(12),
Pager VARCHAR2(12)
END Phone;
CREATE OR REPLACE
TYPE customer_type
AS OBJECT (
CustNo NUMBER,
CustName VARCHAR2(30),
PhoneNumber Phone.Phone_rectype
This is the error that i get:
Warning: Type created with compilation errors.
Errors for TYPE CUSTOMER_TYPE:
LINE/COL ERROR
0/0 PL/SQL: Compilation unit analysis terminated
5/15 PLS-00201: identifier 'PHONE.PHONE_RECTYPE' must be declared
null

That's a good point, Justin - thanks for the advice. At the moment, our process of data validation isn't very well defined, so the table definitions aren't always the same beyond a core set. As we get more automated and able to develop table definitions flexible enough to accomodate all the quirks in client data, I may be able to consider moving to a single schema to take advantage of maintenance and performance improvements. My ultimate concern with doing that is that the datasets we're dealing with can be tens of millions of rows in size. Clearly, I'm no DBA, but I just assumed that we would be able to churn through these datasets faster if they were in a schema by themselves rather than lumped together into one huge half-a-billion row table?

How can I sync ical To Do Tasks? About time?

any ideas on How can I sync ical To Do Tasks? ideally I'd like to sync to my ipad too
I currently have Outlook 2011 syncing its tasks to ical nicely, just now need to put them onto my iphone then it would be perfect!
I'm guessing there might be some apps that do this, but would love some suggestions if anyone has any?
thanks in advance?

Unfortunately this is far from easy. It used to be possible with MobileMe, but the process requires a CalDAV server, which very few website hosting services are.
The first step is that you can't do this with an iCloud calendar: it has to be listed under 'On My Mac'. Control-click the calendar and choose 'Publish'. Set 'publish on' to 'A private server' (I'm looking at this on Snow Leopard, where the default is 'MobileMe', which obviously won't work - I don't know if Mountain Lion is different). What I see is this:
You will want to check 'Publish changes automatically'.
Unfortunately it now gets difficult. If you publish to an ordinary website hosting server, all you will get is a text file. MobileMe had the facility to take the published file and turn it into a structured web page. I'm afraid you may have a lot of difficulty in finding a server to do this - I did see a reference to one which claimed to be able to do this, but people were complaining that it didn't work and unfortunately I can't remember the name. iCal's instructions rather assume that you will be running your own server, which I would assume you don't want to get into - I wouldn't.
The easier alternative is to publish publicly from an iCloud calendar - please see http://help.apple.com/icloud/#mm6b1a9479 and expand 'Share a public calendar' - but recipients will need a CalDAV client to open it: iCal is of course one, and Google Calendars another (though I've seen complaints of it being flaky).

HT204135 How can I set up a daily task to perform a nozzle check on my printer?

How can I set up a daily task to perform a nozzle check on my Epson printer from my MacPro?

Your iMac with ARD... this is the bona fide, ($300/$500) "Remote Desktop.app" admin install, or do you mean that you have ARD "Remote Management" access enabled or have tried to control Vista with Microsoft's similarly-named "[Remote Desktop Connection|http://www.microsoft.com/mac/products/remote-desktop/default.mspx]" app? (Just making sure—it would be a very different conversation otherwise.)
Remote Desktop does lots of fancy stuff, but for the Observe and Control mechanisms it behaves as a plain-jane VNC client. It can connect to any standards-compliant VNC server. You should, for example, be able to run a different VNC client on your Mac and have a similar success/failure experience; perhaps the excelent [Chicken of the VNC|http://sourceforge.net/projects/cotvnc>. If you have the same failures, we'll still help, but ARD is obviously not the culprit. In any case, the usual suspects for windows VNC servers include UltraVNC, realVNC \[paid ver. required for vista\], and TightVNC. They all have caviats, but they're fairly well documented. Vista itself throws VNC under the bus "in favor of security" but again, you'll find lots of users in the same boat; unable to get the VNC server working on the Vista side. Your statement that you "couldn't even see the machines connected to it to get the IP" was bit confusing though, as devices don't need to be running a VNC server to at least show up in a scan (IP printers should appear, for example). Are you sure they're on the same subnet of the same lan/being otherwise scanned for correctly; or if remote, are you sure the remote Vista laptop is directly addressable with NAT from the web?
Let us know. Good luck. Joel

How can i download Adobe Creative Suite 5.5 Design Standard as i don't have a cd drive on my laptop?

how can i download Adobe Creative Suite 5.5 Design Standard as i don't have a cd drive on my laptop?

Hi Adrienne,
Please download the trial version of CS5.5 Design Standard from the below mentioned link and activate it with your serial number
http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html
Thanks!
Eshant

How can i reconcile Treasury transaction with bank statement

How can i reconcile Treasury transaction with bank statement. (R.12) ???
It is possible
Regards
Witek

Hi Judith,
If you're using Windows, you can print your bank statements to the CreatePDF Desktop Printer. You can learn more about this printer by visiting: http://forums.adobe.com/docs/DOC-1495
-David

How can an user defined Transaction type in Inventory be configured in IB?

Need to know how to make an user defined transaction to update the status in IB automatically. i.e. suppose there is an user defined transaction "XYZ". I need to update the instance stause of an item to "CANCELLED" once that transaction happens on the item.
Edited by: user13340970 on Aug 13, 2010 7:14 AM

Hi Atheek,
I was looking at doing the transform manually, but my challenge is how to parse the inbound String into XML Elements with their properties. For example:
Example Message:
<abd:TypedDocument>
<abd:someElement>
<abd:aString><jkl:embeddedMessage jkl:attributeABc="Hello There"><jkl:someOtherElement>OSB Rules!<jkl:someOtherElement><jkl:aNumber>123456</jkl:aNumber></jkl:embeddedMessage>
</abd:aString>
</abd:someElement>
</abd:TypedDocument>
If I get the value of the embedded XML as a string, how can I parse our or address the various elements and attributes in the embedded XML? I was hoping to use:
$aString cast as jkl:embeddedMessage
But on OSB10g this fails. Is there another way with XQuery or XSL to convert an embedded XML that comes in as a string, into a complex User-Defined type?
Thanks,
David.

How can I upgrade Active X script Task in SSIS 2008 R2 ?

In my package had Active X script Task,
I want to remove the Active X script Task,
How Can I do in SQL Server 2008 R2 version ?
Thanks

You need to rewrite it to a .NET script task.
(although the ActiveX task is still availabe in 2008R2. It is discontinued in 2012 though)
MCSE SQL Server 2012 - Please mark posts as answered where appropriate.

How can I use propertiers in workflow-task like "sap.bc.bmt.wfm.groups"

Hello Friends,
i'm hoping you can help me with this question:
- How can I use the properties in the task definition of a workflow?
- And what can i do with it?
At http://help.sap.com is a very low level documentation.
Best regards,
Christian

Answered myself.
Thanks
Christian

How can solve this ORA-03120: two-task conversion routine: integer overflow

Hello everybody,
I'm writing this query "SELECT rowid from <mytable>" and I get this error: ORA-03120
Does anybody know how can i solve it?
Thanks in advice

Here is the cause and action as suggested in the Oracle Error Guide...please see if it helps you to fix the error
ORA-03120:two-task conversion routine:integer overflow
Cause: An integer value in an internal Oracle structure overflowed when being sent or received over a heterogeneous connection. This can happen when an invalid buffer length or too great a row count is specified. It usually indicates a bug in user application.
Action: Check parameters to Oracle calls. If the problem recurs, reduce all integer parameters, column values not included, to less than 32767
Regards,
Murali Mohan

How can I combine these two DAQ tasks???

I am using LabVIEW 11, Windows XP, cDAQ-9174 chassis, two NI-9205 modules.
Please see my code for reference. I am very new so i will accept all suggestions.
I am acquiring 12 volatage signals in a producer/consumer structure giving me a queue of 1-d array of waveform(dbl). Then I am acquiring 12 voltage signals in another loop giving me 2-d array of waveform(dbl).
There is an issue creating the channels. How can I combine these two tasks?
Thanks,
~Chris
Attachments:
WaveTest_6.2.vi ‏558 KB

Hello chrisbe723,
When you say that there is an issue creating the channels, are you getting a specific error message when running your code? Also are you referencing the same set of channels for the two DAQ task you are configuring?
Paul-B
Applications Engineer
National Instruments

How can I to define permission in Task States- Designer Studio 3.1.4

Similar Messages

Maybe you are looking for