How can I track my e-book sales and its downloads at the ibookstore?

Please tell me how to do it.... Thanks in advance...

Welcome to Apple Communities
Access to your sales http://itunesconnect.apple.com

Similar Messages

How can I track my Mac book if I don't have the serial number ?

I got robbed 2 days ago & I need to track my mac book but don't know how please help me

Unless you had Find My Mac activated/turned on or similar, there is no way to track your Mac. Report the loss to the police & your insurance company. Change all of your passwords.

HT1689 How can i track my stolen ipod 5 and without wifi because the person who stole it has turned it off

Please help me i bought it a month ago and its very expensive now someone stole it please answer the question

- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

How can i get my iPhone, ipad mini and mac to show the same contacts calendar and notes

how can i get my iPhone, ipad mini and mac to show the same contacts calendar and notes

Plug the phone and iPad into your computer and sync them.

How can i fix my iphone 3g if and only it displays the apple logo when it is connected to its charger but it displays nothing when the charger is removed?

how can i fix my iphone 3g if and only it displays the apple logo when it is connected to its charger but it displays nothing when the charger is removed?

Plug it into a wall outlet and leave it plugged in for approximately 20 minutes.
Then try a reset by pressing and holding the home and power buttons for 15-20 seconds.
Does the device power on at this point? If not, the battery or logic board is gone.
Take it to Apple for evaluation.
It may be worth replacing the battery, but I personally wouldn't spend the $149US for an Out of Warranty replacement on a 3+yr old device.

How can i deauthorize a computer that crashed and is now in the trash world? i purchased a new laptop and need to authorize my computer

how can i deauthorize a computer that crashed and is now in the trash world? i purchased a new laptop and need to authorize my computer

You cannot, nor do you need to, until you reach the limit of 5. Once you reach 5, then you can deauthorize all, and then authorize the active computers.

How to draw a line of sin x and its area under the line?

Hi,
I know how to draw a line from two points. However, I do not know how to draw a line of function sin(x) and its area under the line. Anyone know where to read or how can I draw it, please help me. Thanks !!
Calvin

use Graphics2D:: draw(Shape)
create a class that implements Shape, and specifically the getPathIterator methods, in these methods you should return a path iterator that follows the sin/cos curve.
All fairly simple to do.
rob,

How can I update my mac book pro. Its seems that it is stuck in 2008.

Hello
I have my old mac book pro and I cant update it.
Thanks

Well, can you please advise us - provide details of what is it you are trying to update? Do you want to update your computer? OS? To which OS version? Both?

How can I get Firefox to "grab onto" and then "hold onto" the data signal until I tell Firefox to release it at the end of my session of internet browsing?

ok, I hope that my description of this problem does not come out in such a disorganized fashion that it makes the description difficult to follow. here goes: every 30 seconds to 1 minute (or thereabouts, I'm estimating) my mobile phone's browser (whether Firefox or any other) loses the data signal, so that tje next time that. I click on something, I get an error message that the "data connection timed out, retry" or "network unavailable" or "check that you are connected to that internet", etc. etc. etc. I have downloaded many apps that are supposed to boost data connectivity and/or improve internet speed, blah, blah, blah, till I discovered that was a problem with the server being able to keep up with staying locked onto my browser. in one of these apps diagnostic screens, I found a notation that therr was something wrong with my cell's relative position. well, how could that be, I wondered, since I had "GPS tracking" "GPS reporting" and "location sharing" all enabled? but, then I noticed, on the image of my cell's location as represented by this particular app, that every half minute, or so, the blue dot which represented my cell's location would slip to the left about one quarter of an inch, or so, and in the longitude and latitude part of this app's diagnostic screen I saw that the numerical designations of my cell's longitude and latitude were zero and zero. it suddenly occurred to me that the server had lost sight of my cell because my cell had moved too far out of the range of that server's sight due to the rotation of the earth. well, blow me down, what am I supposed to do to fix that? how can I tell my cell phone's OS to send out some kind of identifying info on a constant basis, so that the server could keep track of it (and I would not lose the signal)? or, conversely, how could I get my cell phone's browser to grab onto the signal and not let go of it until I was done with that internet session, at which time I would then manually release the signal myself? I hope that my explanation of the problem made enough sense that you could follow it and that you can come up with a workable solution for me. oh yeah, my phone is an LG OPTIMUS ELITE 696. thanx, from the enragedkangaroo.

Hello,
I'm afraid I don't think there is going to be much we can do to help you here. The description sounds like an issue with the phone rather than with Firefox specifically.
I don't think the problem can be caused by you moving out of range of the cell, due to the rotation of the earth. The cell towers (that provide phone signal) are sitting on the earth, just like you, and so move at the same speed as you. This might be a concern with satellite phones using Low Earth Obit satellites but this isn't the case here.
I think the best thing to do would be to get in touch with your Phone Operator or Device Manufacturer for support. If you are out of the support period or can't get support from them for some other reason then a standard 'cure-all' for mobile phones is to do a Factory Reset. This will return your phone to its default factory settings and wipe all of your data / modifications off the phone. This tends to solve most problems and is probably what the official support team would tell you to do. I can't guarantee that it will help but it has a good chance.
There are instructions on resetting your phone here:
http://www.hard-reset.com/lg-optimus-elite-hard-reset.html
I hope that helps.

How can I take music from an USB and transfer it to the iPod? It tells me use use itunes to sync but the music is on an USB drive. It had worked in the past. Tks

How can I transfer music from an USB drive to the iPod. I can see the music and play it on the computer, but the iPod tells me to use iTunes to sync. The music is not on iTunes. It has worked in the past.....tks

These are just playlists. The songs there are really not duplicates of the songs. They are just a different location for accessing them. Some playlists can be deleted, some cannot. Ones that are created by iTunes cannot be deleted. Ones that you create can be. The Recently Added and the 90's cannot.

HT1178 My Time Capsule is only blinking amber. My computer tried to backup but I don't know how to tell if it did in fact back up the data. How can I tell if it backed up and why doesn't the light show green?

Just purchased a Time Capsule. Had to call Comcast to disable the WIFI and have internet connection. The time capsule though blinks amber and the Airport Utility shows blinking amber light and has a red circle with the number 1 in it. After connecting, my computer tried doing a backup for the first time and it appeared that it was backing up and finished although I don't know how to check to make sure that it did backup. How do I check and shouldn't the light on the time capsule be blinking green and the airport utility show green?

TM will show it has done a backup.. Look at the info.. when was the backup completed??
If you want more details install the widget.
A1 here.
http://pondini.org/TM/Troubleshooting.html
The time capsule though blinks amber and the Airport Utility shows blinking amber light and has a red circle with the number 1 in it.
There is an error.. probably trivial.. firmware update, default password..
Open the airport utility and find out what the error is.
Simply click the TC and see status in the summary page.. it will list all the errors and what you should do.. fix or ignore them. ie this TC has an error.. default password.. I chose to ignore.. when I "fix" the problem the LED goes green.
Here is additional TC.. it is blinking amber with faults.
Click the fault. eg default password.
You can ignore or edit .. if you click edit it will take you to the full setup where you can change the settings.
I ignored my errors and now it is green..

How Can I get My iMac Running again when its stuck in the Loading boot up Screen?

My 2010 21.5 Imac wont stop loading, The wheel just keeps spinning and it doesn't even boot in safe mode. the only thing i can do is get into single user mode. My Mac doesn't respond to command + r. I am able to pull up a disk to boot from but it doesn't show a recovery disk, only "Macintosh HD", when i click it I'm back at the apple logo screen with spinning wheel.At this point i want to do one thing and that is factory reset the computer. a fresh install, delete everything, NO BACK UPS. I don't have the install CD (This Computer had a previous owner). If i were to buy a copy of the OS X from the apple store (I believe my computer was running 10.6.8, Im not 100%sure and i dont now how to find out at this point) would i be able to even put the CD in the disc drive? would it read the CD even though its stuck in the boot up(loading) screen? How would i get it out if the Drive doesn't read the disk? Do I have Other options? Thanks guys!

You are using Snow Leopard. There is no COMMAND-R for a startup. That's for Lion or later.
Call Apple and purchase replacement discs for your model. You cannot use the retail version of Snow Leopard on your model. You have no other options unless you have the original discs that came with the computer. When you get the discs:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

How can i put one part in front and one part in the back?

Alright i made this phone and a person and i want to put the bottom in front of his chin and the top behind the ear. How should i do this? Couldnt find anything in my classroom in a book, book.
thanks

The part in front and the part in back have to be two separate objects. Put a rectangle to completely cover the bottom part of the phone and let it mask the whole phone. Copy the clipping group (or duplicate its layer in the layers panel); on the copy, direct-select the end of the mask rectangle that doesn't bisect the phone and drag it the other way, so the rectangle now covers (and crops) the top half of the phone. If you do this on layers you need only make sure the phone-bottom is on the top layer, phone-top is on the bottom layer, and the person layer is between them.

How can I identify new new added harddisk and its device file

Hello:
I am confuse about it. It is about new harddisk map to device file issue.
Example:
I set up two harddisks by VMware SCSI 1:0 & SCSI 1:1, and I can see /dev/sdb /dev/sdc by "lvmdiskscan".
The puzzle is how can I distinguish this two new harddisk mapping device file if SCSI 1:0 & SCSI 1:1 are also 1GB of each?
Just like one which is right SCSI 1:0 map to /dev/sdb or /dev/sdc ? How can I check them using command?

Normally /dev/sda is SCSI ID 0, /dev/sdb SCSI ID 1, etc.
You can try lsscsi command, e.g.:
# lsscsi
[0:0:0:0]    disk    VBOX     HARDDISK         1.0   /dev/sda
[0:0:1:0]    disk    VBOX     HARDDISK         1.0   /dev/sdb
[0:0:2:0]    disk    VBOX     HARDDISK         1.0   /dev/sdc
[0:0:3:0]    disk    VBOX     HARDDISK         1.0   /dev/sdd
[2:0:0:0]    cd/dvd VBOX     CD-ROM           1.0   /dev/sr0

How can I extract both my mp3 file and its associated .jpg out of itunes

Hi everybody,
I'm a DJ and once a month, I like to share a set of mine with my friends. For each set, I also make a dedicated flyer.
I usually put the recorded set in Itunes, then I add the flyers using the "Illustration" (I'm using a French version) tag.
Then, I drag the new file (both the .mp3 and .jpg) on a folder on my computer and I can see the flyers and not the normal Mac icon for music file.
I had always worked, but today I tried to do the same but it doesn't work anymore. In Itunes, my mp3 file contain the flyers, but when I drag it to another folder, the flyer is not there anymore.
What happened???
does anybody know a freeware to associate a mp3 with a .jpg?
Thanks for your help,
Have a nice day
Jean

Bonjour.
I'm not firm with the french iTunes but I'm sure its similar to all other iTunes in the world, except the language of the menus.
You can include the cover (Illustration) inside the music file. mp3, AAC or Lossless makes no difference.
To do so go to:
The song (or songs) by marking it (them) in the main iTunes window. Then right click mouse (or two fingers on touchpad) and choose "Information"
In the information window go to the tab called "cover"
Move the wanted picture via drag & drop into this window. The best format for such illustrations are 500 x 500 pixels. If yours are bigger then iTunes will resize it to fit.
Click on save
If you will change the cover for more than one file (song) you will be ask "you are sure to change all files"
Simply press ok
After that the cover will show up in iTunes and will be exported within the file if you pass the song to others..
There is no reason to place the cover / Illustration in the Music folder cause iTunes uses for imported covers the "Album Artwork" Folder in the Library.

How can I track my e-book sales and its downloads at the ibookstore?

Similar Messages

Maybe you are looking for