How can I transport a single DP Macro???

Hi,
I have a macro book that has a number od DP macro's that have been developed within it.
Over the years macro's have been updated directly within our production system so that I cannot be sure that the macro's already within our development system are the same as the macro's within our Quality System and production system
I have developed a macro which I want to transport through correctly through the Development and Quality system in the correct way. However, I dont think that you can transport a single macro, I think you have to transport the whole Macro Book.
Can anyone advise if there is a way that I can transport my single macro avoiding alot of jiggling around and the risk of making mistakes and overwriting the Production Macro's by mistake.
Thanks in advance for any advise that you can give
Mark

Mark
Please refer this thread
How to transport single macro, NOT the entire macro book
I also have another suggestion for you. Create a temporary data view which is a copy of the data view that contains the "new macro". now go to production system and backmigrate the macro book from the production system to developemnt system (take help from basis to do this).
Now in development system your original data view will be in sync with the data view and macros in production. Now copy the "new macro" from your temp data view in development to the original data view and then create a transport for the original macro book and release it
Thanks
Aparna

Similar Messages

How can I view as "single page continuous" in full screen mode?

how can I view as "single page continuous" in full screen mode?
preferences->page display:
preference->accessbility:

Not possible.

How can I restore a single image from an aperture time machine backup, do I have to restore the entire library? that does not make sense

I hope there has been found a more efficiant solution for this, how can I restore a single image from an aperture time machine backup, I really hope I don't have to restore the entire library? that does not make sense
any suggestions?

Did you try browsing your backups in the Finder ? That is, do not go and "Enter Time Machine". Instead, navigate to your Time Machine backup via Finder and then manually go to the time period (by folder name) you are looking for ... when you find your Aperture library you can then "Show Package Contents" and find the Master you are looking for.

How can I transport data from one client to another client?

How can I transport data from one client to another client?
Regards,
Subho

hmmm, CTS = cutomizing transport?
If you have a customizing table, there are still two possibilities.
1. customize in DEV system and transport
2. customize right there where you need it.
this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

Hi,how can i transport objects from one server to other like (Dev To Qty)

Hi Sir/madam,
Can u explain how can i transport objects from one server to other like (Development To Quality To Production).
Regards,
Vishali.

Hi Vishali,
Step 1: Collect all Transports(with Packages) in Transports Tab(RSA1)- CTO
Step 2: Release the subrequests first and then the main request by pressing Truck button
Step 3: STMS or Customized transactions
Object Collection In Transports:
The respective Transports should have the following objects:
1. Base Objects -
a. Info Area
b. Info object catalogs
c. Info Objects
2. Info Providers u2013
a. Info Cubes
b. Multi Providers
c. Info Sets
d. Data Store Objects
e. Info Cube Aggregates
3. Transfer Rules u2013
a. Application Components
b. Communication Structure
c. Data Source replica
d. Info Packages
e. Transfer Rules
f. Transformations
g. Info Source Transaction data
h. Transfer Structure
i. Data sources (Active version)
j. Routines & BW Formulas used in the Transfer routines
k. Extract Structures
l. (Note) If the transfer structures and related objects are being transferred without preceding
Base Objects transport (e.g. while fixing an error) it is safer to transport the related Info
Objects as well.
4. Update Rules u2013
a. Update rules
b. Routines and formulas used in Update rules
c. DTPs
5. Process Chains u2013
a. Process Chains
b. Process Chain Starter
c. Process Variants
d. Event u2013 Administration Chains
6. Report Objects u2013
a. Reports
b. Report Objects
c. Web Templates
Regards,
Suman

HT1660 how can I use one single library for all users on the same laptop?

how can I use one single library for all users on the same laptop?

You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

How can i transport my e-mail addresses from my p.c. to my iPad?

how can i transport my e-mail from my p.c. to my iPad2 ?

read http://support.apple.com/kb/ht4810

How can I delete a single song from my iPad?

How can I delete a single song from my iPad?

Hi lizdance40,
The first part of your answer worked great, thanks for that! However, since doing that, there are still songs on the iPad that I want to delete. I place my finger on the song, swipe to the left....and nothing. No red "delete" appears at the right. That used to work on my full size iPad, but not on this mini. I just purchased it last Friday...maybe it's defective?
Thanks again,
Sirsheila

How can I create a single order from multiple quotations?

How can I create a single order from multiple quotations that I have created by the transaction VA21 ?
Thanks in advance for the answers.

hi
Go to transaction: /nva01
Enter order type : ZOR
Sale org :xxxx
Dist.channel:xx
Division :xx
Press enter
Click on Sale document and select Create with reference
Then enter 1st quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation1 copy to order.
Then,
Click on Sale document and select Create with reference
Then enter 2nd quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation2 copy to order.
Then,
Click on Sale document and select Create with reference
Then enter 3rd quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation3 copy to order.
Now save the sale document.
Kindly give reward points
Edited by: WISH on Mar 19, 2008 2:25 PM

How can I get a single jar file with NetBeans?

How can I get a single jar file with NetBeans?
When I create the project I get these files:
dist/lib/libreria1.jar
dist/lib/libreria2.jar
dist/software.jar
The libraries that have been imported to create the project are in separate folders:
libreria1/libreria1.jar
libreria2/libreria2.jar
libreria1, libreria2, dist folders are all located inside the project folder.
I added the following code to the build.xml:
<target name="-post-jar">
<jar jarfile="dist/software.jar">
<zipfileset src="${dist.jar}" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria1.jar" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria2.jar" excludes="META-INF/*" />
<manifest>
<attribute name="Main-Class" value="pacco.classeprincipale"/>
</manifest>
</jar>
</target>
Of course there is also the project folder:
src/pacco/classeprincipale.form
src/pacco/classeprincipale.java
Can you tell me what is wrong? The error message I get is as follows:
C:...\build.xml:75: Problem creating jar: archive is not a ZIP archive BUILD FAILED (total time: 2 seconds)

This is not a NetBeans forum, it is a JDeveloper forum. You might want to try http://forums.netbeans.org/. I also saw your other question - try looking in the New to Java forum: New To Java

How can i declare a single radio button field in selection-screen ?

How can i declare a single radio button field in selection-screen ?

>
Rob Burbank wrote:
> And how will you turn it off once it is turned on??
>
> Rob
Thats correct ;)...See ravi if users will ask so many things its our Job to convay the correct solution ....
Just post your org requirement..SOo some body guide you better//
Sas

How can I delete a single password stored in Sync?

I entered a password that i don't want to be stored online. How can one remove that single password? thx for replying...

My page was blank. I took your suggestion and added some text. When I deleted all of the text the page deleted too. Thanks!!!!
Spencer

How can I put a single song in ipod without having to reset it ?

How can I put a single song in ipod without having to reset it ?

Managing content manually on iPod
http://docs.info.apple.com/article.html?artnum=61148
Patrick

Adobe Photoshop Album 2.0. How can I transport my "collections" from my old to my new computer?

Adobe Photoshop Album 2.0. How can I transport my "collections" from my old to my new computer?

Wimineke,
You may try posting over there:
http://forums.adobe.com/community/ps_album_starter
This forum is only ab0ut the forums.
A full list of forums is there:
http://forums.adobe.com/index.jspa

How can I deauthorize a single computer? Says 5 are authorized. If I reauthorize all, how can I reauthorize the ones I want?

How can I deauthorize a single computer? Says 5 are authorized. If I reauthorize all, how can I reauthorize the ones I want?

http://support.apple.com/kb/ht1420

How can I transport a single DP Macro???

Similar Messages

Maybe you are looking for