How can I transpose or change octave my vocals on Logic studio?

<Edited By Host>

One option would be to open your voice track in the sample editor and there open Factory -> Time and pitch machine. Choose the appropriate algorithm and, assuming your voice was recorded in mono, my choice would be Monophonic. Adjust the pitch parameters, under transposition 1200 cents equal 12 semitones which equal the octave you want. First monitor the result and after that you still can fine tune the harmonic parameter to taste. It all depends on the material you're working with and the expected outcome quality. For experimentation it will be fine, but if you are planning to edit 'Bel canto' for instance, I would consider shopping for a plugin which is more specialized for this job.
Good luck!

Similar Messages

  • How can I display a changing variable in a subvi on the front panel of the main vi as the subvi is excuting

    In the document attached the vi on the right is sub to the vi on the left. On the subvi on the right the variable "Field Reading" is continuously updated on the front panel of the subvi as the "for" loop is executed, but only the last value of the variable is updated on the main vi front panel which is what is expected. My question is how can I display the changing value of "Field Reading" on the main vi front panel as the "for" loop in the subvi is running?
    Thank you.
    Solved!
    Go to Solution.
    Attachments:
    Doc2.docx ‏554 KB

    Hopefully I can explain it well enough. It really is simple.
    1) Create an empty global variable and call it something like User Interface References.vi
    2) For each and every control and indicator on your front panel, right-click and select Create/Reference
    3) Place these references wherever you like (I use a series of Event cases to perform my initialisation and these all live in one of these event cases). They can be placed anywhere in the main vi.
    4) For each of the references, right-click and select Create/Indicator
    5) Moving to the front panel, Cut all the indicators and Paste them in the global variable (eg. User Interface References.vi)
    6) Moving back to the block diagram, wire the global variable to each of the references and select the same named global variable.
    All the hard work is now done (until you add another user interface terminal). You should now have something that look as shown below, [except the reference labels would be to the left (not sure why the snippet put them above)]. In my latest program I have 82 references!
    Done. You can now access all your front panel controls and indicators anywhere in your program as shown below.
    You can just select Value in most cases, but in this particular case I wanted to fire off an Event to do some things (log the alarm) as well as just update the value. So, this is another bonus with the method.
    Hopefully this all makes sense. If not, let me know.

  • Control-k key binding broken. How can I check and change my key bindings?

    I use the Terminal app a lot. Unfortunately I am not able to use the control-k shortcut to cut lines in the terminal anymore. How can I check (and change) the Terminal key bindings?
    Thank you!

    Basing on your input, you should get the following values:
    1) session keys
    SK_ENC: 6DCE2A99BACB5207A7A96A92F114D66C
    SK_MAC: 0D446132B168F75CD6F0A780693A4DD3
    SK_DEK: 19F7B0F94837F32874B29B5EFB7809F6
    2) host cryptogram
    1B781553209748EA
    3) Retail MAC
    01761103B810F00E
    Summing up, the External Authenticate command should have the following value:  84 82 01 00 10 1B781553209748EA 01761103B810F00E.
    Try to compare it with your results.
    Regards

  • I have verified my new email address as my Apple ID but my IOS devices keep asking me to sign in to my previous email/Apple ID but have no access to it.  How can I stop or change this?

    I have verified my new email address as my Apple ID but my IOS devices keep asking me to sign in to my previous email/Apple ID but have no access to it.  How can I stop or change this?

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  When you do this you may find that the password for your old ID isn't accepted.  If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I have a keynote presentation that includes a significant amount of video.  When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?

    I have a keynote presentation that includes a significant amount of video.  When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?  I edit the presentation depending on the audience to which I am presenting.

    If you add a new  slide with just a text box (therefore a very small amount of data),  to an existing presentation then save,  Keynote will only save the new content to the file,  it wont save  pre-existing content as its already included in the file.
    The time  taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again.

  • HOW CAN I GET MY CHANGE IN PROCESSING(got it)?

    Hi all....
       please understand my requiement and get back with your valueble answers...
    iam having one table control in one of my screen....
    in that....table control it contains three fields.... so as we know three columns...
    middle column is for second field...
      here i am changing first entry ( 1st row of second column) manually... and clicking one push button of my screen to do some caluclation part combine with table control entries...
    ex: table controls looks like.....(before)
         1   100 ab
         2   200 gh
         3   300 vf
         4   400 fh
         .. .... ......  etc
    now manual i changed above like....(after)
         1   150 ab       <------ only change
         2   200 gh
         3   300 vf
         4   400 fh
         .. .... ......  etc
    So... here my problem is iam getting my caluculation part with that field as 100 only.... not as 150,
    even i debug this variable with defferent conditions like......
       READ TABLE ITAB WHERE ITAB-F1 = 1.
    SO HOW CAN I GET MY CHANGE IN PROCESSING? WHERE I HAV TO MODIFY MY PROGRAM?
    (edited: prevoius ly this value is capturing correctly...because that calculation part is in the module which is added between chain and endchain)
    Expect Max marks,
    Thanks,
    Naveen
    Edited by: Naveen Inuganti on May 27, 2008 11:57 AM
    dont worry guys i got the answer.... we have to catch that varible in the chain and endchain operater.... by using module.....
    thank you all...
    bye...
    Edited by: Naveen Inuganti on May 27, 2008 3:41 PM
    Edited by: Naveen Inuganti on May 27, 2008 4:00 PM
    Edited by: Naveen Inuganti on Jun 13, 2008 11:44 AM

    Hi,
    I think f2 is a key field in table.So 150 considered as new entry.this case you have to keep 100 for delete from table then add 150 entry.i think you are getting update in itab.But not in table.If you  are not getting itab, post your code to check

  • I ordered Illustrator for another user.  I received an invitation that was accepted, logged in and tried to change the account to the name and email of the person it was ordered for.  How can I get this changed and the invitation sent to the right person?

    I ordered Illustrator via creative cloud for another user.  I received an invitation that was accepted  and tried to change the account to the name and email of the person it was ordered for.  How can I get this changed and the invitation sent to the right person? 

    Cloud as a Gift https://forums.adobe.com/thread/1665610

  • How can I check and change the size of photo or doc in iPhone or any other app

    How can I check and change the size of photo or doc in iPhone or any other app

    You would need software form a third party to have this option.  The free software that comes with the 8600 doesn't have an option for that. Vuescan is the only software I could find that says it works with your pritner and has a descreen option.  You have to purchase it, but it will give you more advanced options than the software that came with the printer.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How can I import a change request to a system which is not in the domain

    how can I import a change request into a system which is not part of the transport domain?

    Hi,
    You can transport any requests to any systems even though they are not in the transport domain.
    1) Move the corresponding data & cofiles( in /usr/sap/trans/data & /usr/sap/trans/cofiles directories) to the same location in the target system.
    2)Add the request to the queue from  STMS ->Import Queue ->Extras ->Other Requests - >Add.
    3)The execute the transport as usual.
    Regards,
    Sam

  • I back up my iphone onto itunes on my laptop. I've now got a new laptop, which counts at two locations. This new laptop had to be setup again. Apple says this is three locations. How can I get it changed to two locations?

    I backup my iphone onto itunes on my laptop. Recently I got a new laptop, so that counts at two itunes locations.
    Unfortunately this new laptop was faulty and had to be set up again from scratch.
    Apple now says that's three itunes locations when in fact it's two.
    How can I get this changed back to two locations?

    If by locations you mean "authorized computers" then one of your computers (apparently the new laptop) may be using multiple authorizations.
    To check on this and correct see here: http://support.apple.com/kb/HT1206

  • How can i delete or Change default sms answer by incoming call in Hebrew

    In Hebrew the default sms answer translated not politly and i can't use it
    how can i delete or change the default "Inconvenient to speak now" "לא מתאים לי" and use just my own answer
    in Hebrew it is a problem to write it
    Thank you
    Shay

    Settings>iCloud>Reminders...try turning Reminders off.

  • How can I selectively preview changes in Camera Raw CC

    When working in the Basic Panel in ACR, I would like to selectively review changes of only one slider at a time.  For instance, I have have adjusted exposure and now have also adjusted blacks, how can I preview the change in Blacks while the adjusted Exposure is still in effect? If I toggle the Preview button on and off, I see all the changes cumulatively.  I have tried using the command key, shift, key and option key however, that doesn't seem to work.
    Thanks.

    Sorry, there is another way, which I'd forgotten about, because I almost never use it.
    Say you make these edits, and only these edits: Exposure -1.0 stop, Contrast +20 and Shadows +100, in that order (the values don't matter, they're just random examples).
    Now, to cycle back through the edits in reverse order to that which you made them, use Ctrl + Alt/Option + Z.
    Pressing once gets you back to the image as edited only by Exp and Contrast. Twice gets to Exp only.
    Three times eliminates Exp and you're back to where you first opened the image in ACR.
    To re-instate the edits in the original order, press Ctrl + Shift + Z.
    But this procedure can get messy and confusing in 3 circumstances that I can think of, just off the top of my head.
    First, if you move a slider whilst experimenting with your edits (say, for example, Clarity +20) but then reset it to zero because it does not work as expected.
    Now, when you cycle backwards or forward, your abandoned Clarity edit will be shown.
    Secondly, if you make more than 3 edits, it can become difficult to remember in what order you initially made them and you can get lost when cycling back and forth.
    Thirdly, if you have made any presets and these are applied automatically when first opening the image in ACR, the cycling can once again become more difficult to keep track of.
    Whilst the use of Snapshots in the manner I first suggested is more cumbersome, it guarantees that you can keep track of your edits and compare their before and after effect.
    Message was edited by: Andrew_Hart

  • How Can I Do This Changes To Standard Tab Attribute

    Hi guys,
    How can I add the changes required here
    http://www.theapexfreelancer.com/apex/f?p=APEXFREELANCER:JQUERY_MENU_PLUGIN:0#panel1-5
    Sorry, After you get this link, you need to go to
    Plugin Documentation --> Page Tabs Transform --> Page Tab Template Change.
    How can I add the changes required to this Standard TAB.
    Standard Tab Attributes
    Current Tab
    <div class="#TAB_STATUS#"><div>
    <span>#TAB_LABEL#</span>#TAB_INLINE_EDIT#
    </div></div>
    Non Current Standard Tab
    <div class="#TAB_STATUS#"><div>
    <a href="#TAB_LINK#">#TAB_LABEL#</a>#TAB_INLINE_EDIT#
    </div></div> Best Regards,
    Fateh
    Edited by: Fateh on Jun 4, 2011 11:56 AM

    What needs to be changed? Most details such as Date & Time can be set in System Preferences.

  • How can i do for change my ipod touch 4g screen and how mutch it will cost?

    My screen is Craked how can i do for change it and how mutch it will cost ?
    Is it better buy a new ipod ?

    Check out-of-warranty service options in link below. It would be cheaper to repair.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Hi everybody! How can I transpose data in numbers?

    Hi everybody! How can I transpose data in numbers?

    If you don't want to go to all the trouble of setting up formulas each time you do this, and making sure the new table is the correct dimensions in the destination table, etc, just run this Automator Service.  (Dropbox download)
    After double-clicking the .workflow package to install (you may need to click 'Download Anyway' in System Preferences > Privacy & Security) it will look something like this in your Services menu:
    After that one-time, one-minute setup, all you have to do to use it is select the range you want to transpose, choose 'Copy Transpose' from the menu, click once in a cell where you want the transposed values to appear, and type command-v or option-shift-command-v to paste.  This is similar to (though slightly different from) what one does in Excel.
    To remove or rename the Service, in Finder hold down the option key and in the menu Go > Library > Mobile Documents > com~apple~Numbers and delete or rename the way you would any item in Finder.
    You can view the short AppleScript the service contains by opening it in Automator.
    SG

Maybe you are looking for

  • A dynamic "future" date stamp

    Hello folks, I am looking to insert a future date automatically in a dynamic stamp. That is, I would like to be able to have the stamp automatically add X days to the current date. I have seen a lot of JavaScript forums, tried many of the proposed so

  • Multiple Problems

    Hey! I got some problems here.. 1. xmodmap: i just can get my 6 button mouse (logitech mouseman dual optical) work (6th button on xev says button 8) through manually executing $ xmodmap -e "pointer = 1 2 3 4 5 7 8 6 9 10" if i try to use the ButtonMa

  • Data recovery from a disk that is unmounted

    Here is my problem: disk utility had indicated that I had a couple of bad blocks in my start up disk and recommended that it be replaced. Since I already had a second internal hard drive with plenty of room on it, I simply installed OS 10.4 on the se

  • R9 290 Black screens with newer drivers

    Hi guys. I have a brand new Gaming 290 4G. I cannot get both my displays (1 on DVI and the other on HDMI) to work when trying to install the latest couple of drivers. I have tried 14.12, 14.11.2 and 14.9. As soon as the driver is installed, both my s

  • Compressor 3.0.5 "unknown time remaining"

    Each time I try to compress a file, the time remaining reads "unknown time remaining" and it doesn't move. When I send files to compressor from Final Cut, FCP and Compressor both lock up when I click submit. I have tried all the solutions listed in o