How can I trap Out- of-Memory data with no crash after Crop Tool fails to finish?

The Photoshop 6 beta program froze while using the crop tool on an image size of 8052x5368. I tried to save a file in another program while waiting for the crop to finish (usually about 1 second) and got an out-of-memory error. I checked the D: driv where the file in the other program was saved. I have a flash C: drive and is not selected in the scratch disk preference. Two scratch disks, E: and G:, are selected with a total of about 800GB free space. After closing PS6Beta, the D: drive recovered about 164GB. The D: drive is not selected in the Scratch Disk list. I work with larger files and anticipate this problem again.How can I trap information for Adobe next time?
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x32
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2664 MHz
Built-in memory: 16375 MB
Free memory: 13523 MB
Memory available to Photoshop: 3255 MB
Memory used by Photoshop: 60 %
Image tile size: 128K

The problem remains for how the c: and d: drives were not selected in the scratch disk list. I tried again with only E: and G: drives and the file completed after 20 minutes with a 27.7G file. It would have been an ovious problem if the "info" diaglog box included the projected file size and/or dimensional units (px or in) because I use the dialog for verifying the size of the image. I wanted to make a 300 x400px image rather than a 300x400inch image( 90000x120000px).
Thanks for your quick help.

Similar Messages

  • How can I make a query by date with several TDMS files?

    Hi,
    I have a project that can write and read TDMS files everyday (a file for each day with date and time). There, I can import those files to excel (I choose a file and load it). But, I have a question: How can I make a query by date with those TDMS files? I'd like make a time stamp for start date and stop date, where I could compare the TDMS file dates and sum the values that are in the channels where these files are similar. For example, I save a file with "02/01/2013" name, in other day "03/01/2013", in other day "04/01/2013"... so, i'd like put in time stamp for start date "02/01/2013" file and to stop date "04/01/2013" file, than, sum all values that range with my TDMS files existing. How can I make that? 
    Thanks all,
    Val 

    Hello Val_Auto.
    You're Brazilian, no? Me too. = ^ - ^ =
    I converted VI to version of your LabVIEW (8.5). Is attached in this reply.
    This VI search all your TDMS in a range of dates and join them in a single TDMS. I hope this is what you wanted.
    Query TDMS is the main VI. The TDMS VI Search changes the date format that out from calendar control (which is DD / MM / YYYY) to DD-MM-YYYY. This is because you can't name files using "/". I chose "-" but, if necessary, you should change to keep the same format of your TDMS files.
    If you have any doubt as to its operation or how to make changes to adapt VI for your application, keep at your disposal.
    Thank you for your contact; I hope have helped you and succeed in your application.
    Wesley Rocha
    Application Engineer
    National Instruments Brazil
    Visite a nossa comunidade em PORTUGUÊS!!!
    Attachments:
    Query TDMS.vi ‏62 KB
    tdms search.vi ‏24 KB

  • How can we get Dynamic columns and data with RTF Templates in BI Publisher

    How can we get Dynamic columns and data with RTf Templates.
    My requirement is :
    create table xxinv_item_pei_taginfo(item_id number,
    Organization_id number,
    item varchar2(4000),
    record_type varchar2(4000),
    record_value CLOB,
    State varchar2(4000));
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'USES','fever','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'HOW TO USE','one tablet daily','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'SIDE EFFECTS','XYZ','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'DRUG INTERACTION','ABC','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'OVERDOSE','Go and see doctor','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'NOTES','Take after meal','TX');
    select * from xxinv_item_pei_taginfo;
    Item id Org Id Item Record_type Record_value State
    493991     224     1265-D30     USES     fever     TX
    493991     224     1265-D30     HOW TO USE     one tablet daily     TX
    493991     224     1265-D30     SIDE EFFECTS     XYZ     TX
    493991     224     1265-D30     DRUG INTERACTION     ABC     TX
    493991     224     1265-D30     OVERDOSE      Go and see doctor     TX
    493991     224     1265-D30     NOTES     Take after meal     TX
    Above is my data
    I have to fetch the record_type from a lookup where I can have any of the record type, sometime USES, HOW TO USE, SIDE EFFECTS and sometimes some other set of record types
    In my report I have to get these record typpes as field name dynamically whichever is available in that lookup and record values against them.
    its a BI Publisher report.
    please suggest

    if you have data in db then you can create xml with needed structure
    and so you can create bip report
    do you have errors or .... ?

  • I have a MacBook 6,1 and have a number of start up discs. How can I find out which one came with my model?

    I have a MacBook 6,1 and have a number of start up discs. How can I find out which one came with my model?

    They sometimes have that information on the label. Otherwise, it's trial and error. The model you have is a Late 2009 13" MacBook. It came with a special version of 10.6.1 pre-installed.

  • HT204088 Hello everyone, i want to know how can i found out the purchases made with my credit card (not by my apple ID)?

    Hello everyone, i want to know how can i found out the purchases made with my credit card (not by my apple ID)?
    I found out in my Credit Card bill some purchases in itunes store that wasn't made by me.
    thanks to all helpers

    This would be something you would need to address with your credit card company. Apple cannot tell you who else might have used your card nor what purchases they might have made. Call your credit card company and report the charges as fraudulent. You'll probably need to have them cancel your existing card and issue you a new one.
    Regards.

  • How can I resize an image without losing resolution or using the crop tool? I am using Photoshop Elements 13 on a PC.

    How can I resize an image without losing resolution or using the crop tool? I am using Photoshop Elements 13 on a PC.

    Hi Peru Bob,
    I've tried two images, the results were:
    Image 1
    Jpg, original file size 923KB, dimensions 848px x 279px.
    After resizing to 848px x 180px with 72dpi, the file size decreased to 164KB.
    Image 2
    Jpg, original file size 809KB, dimensions 1200px x 1800px.
    After resizing to 668px x 722px with 72dpi, the file size decreased to 307KB.
    So, there seems to be a fair file size loss - is this to be expected?

  • How can we find out when master data was activated

    Hello Friends,
    We are loading master data for one info object directly from R3 to Info Object without PSA.
    1) The Request Green in RSMO only tells that data is loaded successfully but it does not give any information about Activation is that right ?
    2) How can i find out histroy of when one particular Info Object( Master data ) is activated? any tables or tcodes ?
    Thanks
    Tony

    hi,
    1) The Request Green in RSMO only tells that data is loaded successfully but it does not give any information about Activation is that right ?
    Ans- yes it give loading details only.
    2) How can i find out histroy of when one particular Info Object( Master data ) is activated? any tables or tcodes ?
    ans -in SM37 chk any attribute change run is completed , else in RSA1 Tools -> apply attribute change and hierarchy -> you can see the finished and scheduled job.
    also u can chk the master data table for any M version records is available.
    Ramesh

  • How can I zero out the memory on my macbook air?

    I have an 11 inch mid 2011 macbook air and cannot figure out how to erase the memory so that none of the data is recoverable. I booted from the recovery HD but when I went to the erase section of the menu, the security options button and the zero out empty space option were both greyed out. How can I clean off my Mac?

    You can't, and don't need to, zero an SSD in Disk Utility. Once you've erased it the data is unrecoverable.

  • How can I solve out of memory error on excell file in PL/SQL

    Hi,
    I'm new on PL/SQL. One of the PL/SQL code which is created excell report got out of Memory error. The first reason of this error, excell file not supported more than 65536 data. So I change the excell file separeted sheets. So that the single sheet size cannot exceed 65536 data.
    All the data are held on system cach and if many user want to take the report the they would get an out of memory error.
    So I want to change the code like that; when out of memory exception raises,
    the old excell file save to disk and new excell file is created,
    and go on to write the new file without exiting the program.
    At the end of the data all the excell file append and show only one file to the user.
    I do know how to save the file and create a new file. But I don't know how can PL/SQL program to turn back to loop again when the exception occurs.
    Is anyone help me on this issue?
    Here is my code
    Thank you
    dworkbook:=hssfworkbook.new;
    dCurrentItem := Get_Block_Property(pCurrentBlock, FIRST_ITEM);     
    while not (name_in('system.last_record')='TRUE') loop
    /* The data would be written to the excell file column order. */
    if (dRow=0) then
              /* Create a new sheet */
    elsif (dRow <= dMaxWorksheetNum) then
         /* Data of the report are written here. The data are written in column order */
    if (dRow > dMaxWorksheetNum) then
         /* give dRow and dColumn intial value */
    /* increase worksheet number */
    end if; /* End of if (dRow=1) */
    if (isWritten) and not name_in('system.last_record')='TRUE'then
         /* if not at the end of the record and the previously read record is written to the file
         , then go to next record */
         next_record;
    end if;
    /* save excell report */
    workbookwriter.save(dworkbook,global.gethome||dFileName);
    web.show_document('/users/'||dFileName,'_BLANK');
    /* when exceptions occurs */
    EXCEPTION
    WHEN ORA_JAVA.EXCEPTION_THROWN THEN
    begin
         javaException := ORA_JAVA.LAST_EXCEPTION;
         -- Print out the Exception by using the toString()
         -- Method of the exception Object
         javaException2 := Exception_.new(javaException);
         mess(27002,Exception_.getMessage(javaException2));
         -- and clean up
         ORA_JAVA.CLEAR_EXCEPTION;
    exception
         WHEN ORA_JAVA.JAVA_ERROR THEN
    -- In this case, the error would be
    -- Argument 1 can not be null
    mess(27002,ORA_JAVA.LAST_ERROR);
    --Clean up
    ORA_JAVA.CLEAR_ERROR;
    end;
    WHEN ORA_JAVA.JAVA_ERROR THEN
    -- In this case, the error would be
    -- Argument 1 can not be null
    message(ORA_JAVA.LAST_ERROR);
    --Clean up
    ORA_JAVA.CLEAR_ERROR;

    No need to double-post... most questions are answered pretty quickly...

  • How can I find out the exact date or just month an...

    Can you help me on the above question??

    It's not written on your account, but you may contact customer service they might be able to help you: https://support.skype.com/en/faq/FA1170/How-can-I-contact-Skype-Customer-Service
    Andre
    If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

  • How can I find out what is wrong with swap image in a library

    I had a DW8 site that used  a library item on many pages with the calls to the macromedia swap image function.  Everything was fine.
    I've now converted to CS5.5 and I find that:
    a) When the library item is changed, the updated pages don't have proper local relative paths. Instead they have the exact path in the library item itself.
    b) I can't detatch the library item from a page, I get:
    An error occured while loading behavior "Swap Image" Please check this file and associated JavaScript files for errors.
    When OK'd this is followed by
    Dreamweaver encountered an improper argument.
    I went back to DW8, forced a library update and everything was fine.  I've checked and so far as I can see, the swap image funtion is identical in the DW8 and CS5.5 versions.
    I don't know if a and b are related, 

    An example page with the associated files that might be involved in this
    problem are copied into dummy files on the customer's site:
    http://valeriewilding.co.uk/queens2.htm
    http://valeriewilding.co.uk/vwqueens.js
    http://valeriewilding.co.uk/topNavQueens.lbi
    The equivalent working files (from DW8) on the site are
    http://valeriewilding.co.uk/queens.htm
    http://valeriewilding.co.uk/vw.js
    The library file is not normally on the site and, if it was, it would be in
    the library directory which could not normally be reached from the htdocs
    folder.  Going back to DW8 as a workaround has solved problem (a) - the path
    error - but downloading these files into a CS5.5 environment should still
    show problem (b), being unable to remove the attachment.
    There is a second library item on the page, the bottom navigation, and this
    can be detached without problem.
    The folder structure on my PC is:
    htdocs
    --- queens2.htm
    --- vwqueens.js
    Library
    --- TopNavQueens.lbi

  • How can we find out data in an editable ALV grid has been changed or not?

    Hi Experts,
    How can we find out whether a data in an editable ALV grid has been changed or not.
    I am using the
    FM -> REUSE_ALV_GRID_DISPLAY_LVC
    for ALV display.
    I have to chekc whther data has been changed or not befor saving. if changed then only i want to
    SAVE
    . I cannot use the internal table comparison method for this purpose also i am not using OOP ALV.
    So kindly sugest me an alternative.
    Thanks and Regards,
    Shahana

    Hi,
    Thanks for your answer. I already saw this post.
    See this method.
    CALL METHOD reuse_alv_grid->check_changed_data
    IMPORTING
    e_valid = lv_check.
    This will update the internal table with the edited values. Then we can go for internal table comparison.
    But my scenario will not allow me for itab comparisons.I just want to know the ALV data has been changed or not.
    Regards,
    Shahana

  • How can i pull out data from a spreadsheet only from the current month?

    Data is constantly being fed into a spreadsheet using a VI, this data comprises of such things as month, year, weights, std dev, etc.  I want to do some data manipulation on the current months data while the VI is running, how can I pull out only the data relating to the current month?  Each input into the spreadsheet stores the values for that run on one row, and there are perhaps 150 runs each month
    Any thoughts are greatefully received
    Thanks
    Ross
    Attachments:
    Results.xls ‏1 KB

    Hi Ross,
    I thought I would go away and make you an example VI for the results xls that you have sent me.
    Here it is:  I have added a few comments here and there but if you need more info please don't hessitate to post back on the forum
    Hope if helps
    AdamB
    National Instruments
    Applications Engineering Team Leader | National Instruments | UK & Ireland
    Attachments:
    MonthExtract.vi ‏43 KB

  • How do i find out the purchase date and my coverage plan?

    how can i find out the purchase date and my coverage plan on my ipad?

    Try here for the warranty coverage. Your date of purchase would be tied to wherever you bought the device.
    https://supportprofile.apple.com/

  • How can I sign out of iTunes after download finishes

    How can I sign out of itunes or bthe app store after a dowload completes?

    Only if you set up the computer to require separate computer logins. It is tedious to retrofit that.
    To help avoid problems you can turn off autosyncing so that you have to overtly start a sync. To turn off go iTunes>Preferences>Devices and check the box that says "Prevent iPods...".

Maybe you are looking for