How can I turn a recorded voice into multiple voices that sound like a group of singers?

I'm using Logic Pro 9. Could someone teach me how to turn a single recorded voice into multiple voices that sound like a group singing together
by mixing or other techniques ? I don't have the luxury of a group singing together with me when I do recording. Advices would be much appreciated!

By far the most natural way to achieve this is for the singer to perform multiple takes - even if you've only one singer. At it's simplest, you could just double track the vocal part, although I prefer 3 parts - panned centre, left & right. Then repeat this process for each harmony, & mix accordingly.
Melodyne & some of the above methods do work on am single voice, but phase cancellation can be an issue if your not careful with each part's timing & panning. If you can only get a couple of decent takes from the singer, far better to perform any harmony/pitching techniques on the second take to avoid any phase issues. It's not uncommon for a singer to perform each vocal part 5-10 times, then comp (edit) the best takes so that you end up with 3 decent takes.
If you've only only one voice to work with Antares Harmony EFX is a useful alternative.
http://www.antarestech.com/products/harmony_efx.shtml

Similar Messages

  • How can I turn garage band files into mp3s?

    On my older Macbook i have always been able to easily turn my .band files into mp3s under the Advanced heading in itunes, but with my Macbook Pro, that is not an option. The option has become "Create AAC version". How can I turn my .band files into mp3s so that I can load them onto my web page and my students can pick them up as mp3s and put them on their devices?

    The option has become "Create AAC version".
    Your iTunes importing preferences are currently set to AAC. If you change your Importing preferences to mp3, the option should then become "Create mp3 version". See the following document for some more details:
    iTunes: How to convert a song to a different file format

  • How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?

    How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?
    I created a few images (pages for a site) on photoshop and want to turn them into HTML code for a website- Can i Just upload the file into one of these programs and make a file with the correct code imediatly?
    I was reading about using EDGE Reform but i did not understand if i can create the code with it, in the end it says it still needs to be sent to website developer after?

    You need to look at Dreamweaver as a code editor. You need to learn to create good, clean HTML code with style sheets to make websites with Dreamweaver.
    There are tutorials that will take you from a layered .PSD file to HTML. Here's a good one:
    http://net.tutsplus.com/tutorials/site-builds/from-psd-to-html-building-a-set-of-website-d esigns-step-by-step/
    Adobe's Muse is a semi-WYSIWYG website layout creator for small websites (1-5 pages). But there is no way you can go from a .PDS file to Muse, you have to start the site in Muse.
    I have seen a few Muse sites and they're OK, but there is some code that Muse creates that is kind of odd. If you want a good, clean website that will work for you or your business, Dreamweaver is the best choice. Alternatively, you could hire a pro.
    -Mark

  • How can i turn my iphone 4s into an ipod touch, the phone has been deactivated and has been recovered, i also do not have a sim card for the phone... can anyone help me.

    How can i turn my iphone 4s into an ipod touch, the phone has been deactivated and has been recovered, i also do not have a sim card for the phone... can anyone help me.

    http://support.apple.com/kb/ht3406
    Apple recommended process

  • I have powerpoint for Mac on my imac.  I can't seem to get the active text box function to work like it did on my PC.  How can I insert an active textbox into a presentation that will allow me to type while presenting?

    I have powerpoint for Mac on my imac.  I can't seem to get the active text box function to work like it did on my PC.  How can I insert an active textbox into a presentation that will allow me to type while presenting?

    I've gotten a little further on this. The dynamic select is
    working fine. It's the "a href" code that isn't. I'm wondering if
    someone can look at this line and tell me if it's okay to build the
    query string this way. The storeid comes through fine but I'm still
    not getting the employeeid value to pass. Here's line that's not
    working:
    td><a href="registerStoreCust.php?storeid=<?php echo
    $row_storeRS['storeid']; echo "&employeeid="; echo
    $_GET['employeeLM']; ?>">Register
    Customer</a></td>

  • How can I turn an audio podcast into a video for Youtube using iMovie?

    Hey there, guys.
    I'm trying to turn a podcast I created in Garageband into a movie using iMovie so I can upload it to YouTube. Now, for the duration of this podcast, I simply want one picture to show on the screen. So, in other words, the cast goes for about 55 minutes, so for the entirity of these 55 minutes, I just want one picture to show. That's all. Just one picture for the duration of the cast. How can I achieve this seemingly simple task using iMovie? Your aid with this is very much appreciated.
    Cheers.

    You create selections based on color range.
    Mylenium

  • How Can I Turn A Software Loop Into A Real Instrument Loop?

    My primary reason for wondering about this is that one of my songs requires a windchime sound throughout...but not too much of one. Just a touch of windchimes. The Orchestra Kit has a few pretty good windchime sounds BUT the natural sustain is too long for what I want. If figure I can get my wisp of a windchime if I can convert my miniscule software loop into a real instrument loop then whittle it down to the sound I want.
    How can I make this conversion?

    Well, Hangtime...You were absolutely right (again!) about messing around with the notes preferred over dissecting them.
    I got an absolutely gorgeous windchime sound from applying a couple of carefully auditioned filters and then messing around with the volume at the end of each note. It actually turned out better than I had imagined. It turned out so very nice that I gave it a well spaced looping rhythm and now the windchime is throughout the entire song and the song is better for it.
    My dissection effort didn't get a natural sounding windchime effect at all. I trashed it almost immediately.
    hugs

  • How can I turn a smart phone into a dumb phone (for punishment when I still need her to have a phone)?

    I believe I am on the verge of needing to know how to turn my daughters phone into a dumb phone as a consequence.  I still need her to be able to call me, but not much else.  Anyone have any helpful hints?  She has a 5C.

    Remove all the email accounts that are on the device.
    Turn off FaceTime & iMessage.
    Create a new Apple ID using a new email address that you create, and that only you know the password to.
    Use that Apple ID for Settings > iCloud and Settings > iTunes & App Store.
    Delete all the third-party apps on the device.
    Go into Setting > Cellular and disable all apps from using cellular data (except Find My iPhone).  Or even disable Cellular data totally.
    Use the Restrictions option under Settings > General > Restrictions.  Create a Restrictions passcode that only you know
    Disable the ability to use everything from Safari down to Carplay under the Restrictions.
    Set all the allowed content to the most restricted options available.
    Set the Allow Changes in Restrictions to prevent allowing changes to Account, Cellular Data Use, ad maybe even volume limit.
    That pretty much makes it so she can make phone calls and use normal texting, but has no internet access, no way to browse online, no way to use any apps other than what's already pre-installed, can't use FaceTime, can't use the Camera, can't add email accounts to the device, can't change out the iCloud account, etc.  It basically dumbs the iPhone down as far as it can possibly go.

  • How can i turn an iphoto slideshow into a book?

    I am wondering how I can turn an iphoto slideshow into a book?

    No - you can make a book from the same photos but not form the slide show - smiply elect the same photos (probably in the album you made the slide show from) and make a new book from them
    LN

  • How can I turn an image/graphic into a simple, low detail image for T-shirt printing (see examples)?

    So, I do know my Photoshop, but this is just killing me! I've messed with the filters and can get an allright image, but there has to be an easier way that I'm just not thinking of. Can you tell me how to convert an image into a low detail image like the ones below?

    You create selections based on color range.
    Mylenium

  • How can I split an Orders05 iDoc into multiple iDocs?

    Hello,
    Can one of you experts please tell me how I can split an ORDERS05 iDoc into multiple iDocs based upon Delivery addresses? 
    For example, if the iDoc contains 3 different Delivery Addresses then I need to split it into 3 iDocs.
    It has been suggested to me that I can Create a custom function module. In this custom fm split the idoc into 3 based on the delivery address and create it using the FM MASTER_IDOC_DISTRIBUTE.
    Problem is I don't know how to do this.  Any help is greatly appreciated.  Thanks.
    Dan

    Hi Dan Avis
    Write a Custom  Z program .
    1 get order05 idoc number....
    2 get the segment details...(Based on you condition...)
    3 In a loop  send the data to the FM MASTER_IDOC_DISTRIBUTE  (Based on you condition...)
    4 IDOC will generated,,,every loop and
    5 Change the status of original idoc .
    or
    Create Function module and use the FM as process code to create 3 idocs...and processs...new generated idoc and block original idocs...
    Call me if you have questions  @ 302 290 5677
    Thanks
    Ramesh

  • How can I turn my old macbook into a file server

    So I have an old macbook from 2007. I don't believe it can run yosemite or mavericks, so i'm stuck with lion at the moment. I wanna be able to leave it running as a server so when I go away I can access files from it. Basically I wanna use it as my own cloud server. I use this program called plex from the itunes store which works great as a media server, but I wanna make even more use of the thing. It's such a great computer still even after all these years. Is there any (preferably free) way I can accomplish this safely? I'd like to be able to have some sort of authentication too so no one else can get into the server without a passcode or something.

    You may also wish to check into the availability of a Server version of Lion OS X 10.7.5
    or if the computer you have shipped with Snow Leopard 10.6, there should be one still
    available from the Apple store or online main store's operating system specialists...
    You'd need to check on availability or ask to talk to someone about it. The main Apple
    page store phone number should be able to direct you to an OS Specialist.
    The Snow Leopard version was better for some users with old hardware since it was
    available on DVDs and so a Server setup could be maintained or backups made
    ahead of need (extra backup clones or replacement pre-installed or RAID array) to
    continue use of a computer 24/7 as a Server. As such, the setup would be different
    than with a basic computer sharing files locally; a wireless Time Capsule or other
    wi-fi network may be utilized to share an internet connection and files between a
    group of authorized computers or supported devices. An older OS X may not be able
    to support newer iDevices, so the specifications of those may need to be checked into.
    For some, the use of a Mini Mac that can be set up without a display as a server, once
    it is running, is a minimalist situation. There should be several archives of Support info
    on how to do all of these kinds of things in the Apple Support online database.
    The suggestion above is a good start on a feel of basic settings to configure a shared
    server; the actual software version for Servers covers more to a higher level of use.
    And it may not be necessary for a home network.
    Good luck & happy computing!

  • How can I turn a pse file into a jpeg

    Today I created a pse file by the photo collage device. This is the only p file I have, and I would like to know if it is possible to convert this into a jpeg, and if so how? Thank you,
    Ian Julian
    www.natureandpictures.com

    Thank you for that.  As I have
    so many pictures in Orgainizer, I try to convert every file into a jpeg, as there is less
    memory, it is quicker, and I can use them for emails creations etc.
    Ian Julian
    www.natureandpictures.com

  • Audigy 2 ZS - How can I turn off record input monitori

    Just upgraded from SBLi've value to Audigy 2 ZS and discovered an irritating new "Feature" that was not on the SBLi've.
    During recording, any input source is automatically present on the card's outputs. I'm using an external audio mixer and do not need (or want) to hear what I am recording back through the card while I'm recording it. I only need to monitor previously recorded tracks.
    I've searched and so far can't find any way of switching this off. Anyone know how to fix this?
    Thanks, Rick

    Essex,
    Open the Creative Surround Mixer application, look under the recording section and select Analog Mix. Click on red cross on the top and you should have that option.
    Jason

  • How can I turn my iMovie DVD into a quicktime video? The original is no longer saved on my mac.

    I have made a handful of movies through iMovie. Burned them onto DVD and erased the original videos that were created years ago. I would like to take my DVDs and somehow put them onto my Apple TV. I'm assuming the answer would be to create them in quicktime. I'm having trouble and have a bad feelilng this idea can't be done. Please advise.
    Thanks.

    mbdeady wrote:
    …  I would like to take my DVDs and somehow put them onto my Apple TV.…
    use the free tool Handbrake.
    it offers presets to convert DVDs straight into an AppleTV-compliant format.

Maybe you are looking for

  • Forced restart loop/not recognizing restarts

    Hello, when I power on my MacBook, I get the message You Need to Restart your computer, Hold the power button for several seconds or press the restart button. Naturally I hold down the power button image displayed the in the backround and sure enough

  • Making divs expand to the height of the highest div

    I'm currently building my portfolio website. I'm not a coder and find it difficult so I really need simple answers if possible please. The page I'm working on can be found here: http://www.infomaticfilms.com/jack/jrimg/g_and_d.htm. It's far from fini

  • Hi gurus, can any one explain me about patches in SAP?

    Hi gurus, Can any one explain me about patches in SAP? Regards Raghu

  • Using a SQL Query Group by is needed

    Hi All, Scenario Below: we have 2 Transactions, 5 Lines and each line is having 2 Taxes correspondingly. We have few more formula columns which are calculating based on requirements. We need to Group the amount at Line level for the one specific TAX.

  • Poor picture quallity through iPhoto purchased pictures?

    I just recently ordered over 150 prints of a recent vacation from iPhoto with two different cameras. One is a 5 MP and the other a 8 MP camera. Pictures from both cameras when I received them in the mail were very poor quality. I contacted apple supp