How Can I Turn A Software Loop Into A Real Instrument Loop?

My primary reason for wondering about this is that one of my songs requires a windchime sound throughout...but not too much of one. Just a touch of windchimes. The Orchestra Kit has a few pretty good windchime sounds BUT the natural sustain is too long for what I want. If figure I can get my wisp of a windchime if I can convert my miniscule software loop into a real instrument loop then whittle it down to the sound I want.
How can I make this conversion?

Well, Hangtime...You were absolutely right (again!) about messing around with the notes preferred over dissecting them.
I got an absolutely gorgeous windchime sound from applying a couple of carefully auditioned filters and then messing around with the volume at the end of each note. It actually turned out better than I had imagined. It turned out so very nice that I gave it a well spaced looping rhythm and now the windchime is throughout the entire song and the song is better for it.
My dissection effort didn't get a natural sounding windchime effect at all. I trashed it almost immediately.
hugs

Similar Messages

  • How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?

    How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?
    I created a few images (pages for a site) on photoshop and want to turn them into HTML code for a website- Can i Just upload the file into one of these programs and make a file with the correct code imediatly?
    I was reading about using EDGE Reform but i did not understand if i can create the code with it, in the end it says it still needs to be sent to website developer after?

    You need to look at Dreamweaver as a code editor. You need to learn to create good, clean HTML code with style sheets to make websites with Dreamweaver.
    There are tutorials that will take you from a layered .PSD file to HTML. Here's a good one:
    http://net.tutsplus.com/tutorials/site-builds/from-psd-to-html-building-a-set-of-website-d esigns-step-by-step/
    Adobe's Muse is a semi-WYSIWYG website layout creator for small websites (1-5 pages). But there is no way you can go from a .PDS file to Muse, you have to start the site in Muse.
    I have seen a few Muse sites and they're OK, but there is some code that Muse creates that is kind of odd. If you want a good, clean website that will work for you or your business, Dreamweaver is the best choice. Alternatively, you could hire a pro.
    -Mark

  • How can I turn garage band files into mp3s?

    On my older Macbook i have always been able to easily turn my .band files into mp3s under the Advanced heading in itunes, but with my Macbook Pro, that is not an option. The option has become "Create AAC version". How can I turn my .band files into mp3s so that I can load them onto my web page and my students can pick them up as mp3s and put them on their devices?

    The option has become "Create AAC version".
    Your iTunes importing preferences are currently set to AAC. If you change your Importing preferences to mp3, the option should then become "Create mp3 version". See the following document for some more details:
    iTunes: How to convert a song to a different file format

  • How can i turn my iphone 4s into an ipod touch, the phone has been deactivated and has been recovered, i also do not have a sim card for the phone... can anyone help me.

    How can i turn my iphone 4s into an ipod touch, the phone has been deactivated and has been recovered, i also do not have a sim card for the phone... can anyone help me.

    http://support.apple.com/kb/ht3406
    Apple recommended process

  • How can I turn an audio podcast into a video for Youtube using iMovie?

    Hey there, guys.
    I'm trying to turn a podcast I created in Garageband into a movie using iMovie so I can upload it to YouTube. Now, for the duration of this podcast, I simply want one picture to show on the screen. So, in other words, the cast goes for about 55 minutes, so for the entirity of these 55 minutes, I just want one picture to show. That's all. Just one picture for the duration of the cast. How can I achieve this seemingly simple task using iMovie? Your aid with this is very much appreciated.
    Cheers.

    You create selections based on color range.
    Mylenium

  • How can I turn a smart phone into a dumb phone (for punishment when I still need her to have a phone)?

    I believe I am on the verge of needing to know how to turn my daughters phone into a dumb phone as a consequence.  I still need her to be able to call me, but not much else.  Anyone have any helpful hints?  She has a 5C.

    Remove all the email accounts that are on the device.
    Turn off FaceTime & iMessage.
    Create a new Apple ID using a new email address that you create, and that only you know the password to.
    Use that Apple ID for Settings > iCloud and Settings > iTunes & App Store.
    Delete all the third-party apps on the device.
    Go into Setting > Cellular and disable all apps from using cellular data (except Find My iPhone).  Or even disable Cellular data totally.
    Use the Restrictions option under Settings > General > Restrictions.  Create a Restrictions passcode that only you know
    Disable the ability to use everything from Safari down to Carplay under the Restrictions.
    Set all the allowed content to the most restricted options available.
    Set the Allow Changes in Restrictions to prevent allowing changes to Account, Cellular Data Use, ad maybe even volume limit.
    That pretty much makes it so she can make phone calls and use normal texting, but has no internet access, no way to browse online, no way to use any apps other than what's already pre-installed, can't use FaceTime, can't use the Camera, can't add email accounts to the device, can't change out the iCloud account, etc.  It basically dumbs the iPhone down as far as it can possibly go.

  • How can i turn an iphoto slideshow into a book?

    I am wondering how I can turn an iphoto slideshow into a book?

    No - you can make a book from the same photos but not form the slide show - smiply elect the same photos (probably in the album you made the slide show from) and make a new book from them
    LN

  • How can I turn my old macbook into a file server

    So I have an old macbook from 2007. I don't believe it can run yosemite or mavericks, so i'm stuck with lion at the moment. I wanna be able to leave it running as a server so when I go away I can access files from it. Basically I wanna use it as my own cloud server. I use this program called plex from the itunes store which works great as a media server, but I wanna make even more use of the thing. It's such a great computer still even after all these years. Is there any (preferably free) way I can accomplish this safely? I'd like to be able to have some sort of authentication too so no one else can get into the server without a passcode or something.

    You may also wish to check into the availability of a Server version of Lion OS X 10.7.5
    or if the computer you have shipped with Snow Leopard 10.6, there should be one still
    available from the Apple store or online main store's operating system specialists...
    You'd need to check on availability or ask to talk to someone about it. The main Apple
    page store phone number should be able to direct you to an OS Specialist.
    The Snow Leopard version was better for some users with old hardware since it was
    available on DVDs and so a Server setup could be maintained or backups made
    ahead of need (extra backup clones or replacement pre-installed or RAID array) to
    continue use of a computer 24/7 as a Server. As such, the setup would be different
    than with a basic computer sharing files locally; a wireless Time Capsule or other
    wi-fi network may be utilized to share an internet connection and files between a
    group of authorized computers or supported devices. An older OS X may not be able
    to support newer iDevices, so the specifications of those may need to be checked into.
    For some, the use of a Mini Mac that can be set up without a display as a server, once
    it is running, is a minimalist situation. There should be several archives of Support info
    on how to do all of these kinds of things in the Apple Support online database.
    The suggestion above is a good start on a feel of basic settings to configure a shared
    server; the actual software version for Servers covers more to a higher level of use.
    And it may not be necessary for a home network.
    Good luck & happy computing!

  • How can I turn a recorded voice into multiple voices that sound like a group of singers?

    I'm using Logic Pro 9. Could someone teach me how to turn a single recorded voice into multiple voices that sound like a group singing together
    by mixing or other techniques ? I don't have the luxury of a group singing together with me when I do recording. Advices would be much appreciated!

    By far the most natural way to achieve this is for the singer to perform multiple takes - even if you've only one singer. At it's simplest, you could just double track the vocal part, although I prefer 3 parts - panned centre, left & right. Then repeat this process for each harmony, & mix accordingly.
    Melodyne & some of the above methods do work on am single voice, but phase cancellation can be an issue if your not careful with each part's timing & panning. If you can only get a couple of decent takes from the singer, far better to perform any harmony/pitching techniques on the second take to avoid any phase issues. It's not uncommon for a singer to perform each vocal part 5-10 times, then comp (edit) the best takes so that you end up with 3 decent takes.
    If you've only only one voice to work with Antares Harmony EFX is a useful alternative.
    http://www.antarestech.com/products/harmony_efx.shtml

  • How can I turn an image/graphic into a simple, low detail image for T-shirt printing (see examples)?

    So, I do know my Photoshop, but this is just killing me! I've messed with the filters and can get an allright image, but there has to be an easier way that I'm just not thinking of. Can you tell me how to convert an image into a low detail image like the ones below?

    You create selections based on color range.
    Mylenium

  • How can I turn a pse file into a jpeg

    Today I created a pse file by the photo collage device. This is the only p file I have, and I would like to know if it is possible to convert this into a jpeg, and if so how? Thank you,
    Ian Julian
    www.natureandpictures.com

    Thank you for that.  As I have
    so many pictures in Orgainizer, I try to convert every file into a jpeg, as there is less
    memory, it is quicker, and I can use them for emails creations etc.
    Ian Julian
    www.natureandpictures.com

  • How can I turn my iMovie DVD into a quicktime video? The original is no longer saved on my mac.

    I have made a handful of movies through iMovie. Burned them onto DVD and erased the original videos that were created years ago. I would like to take my DVDs and somehow put them onto my Apple TV. I'm assuming the answer would be to create them in quicktime. I'm having trouble and have a bad feelilng this idea can't be done. Please advise.
    Thanks.

    mbdeady wrote:
    …  I would like to take my DVDs and somehow put them onto my Apple TV.…
    use the free tool Handbrake.
    it offers presets to convert DVDs straight into an AppleTV-compliant format.

  • How can I turn a 4x6 picture into a 6x6 square without cropping away anything?

    Hi. This picture is essentially 4x6. I'd like to make it fit a square frame, but I don't want to cut anything out. Instead, I want to add a couple inches to the top. I'll use the clone tool to make more sky and clouds. Once I have it 6x6, I'll then shrink it to 5x5, but I don't think that's important right now. I just can't figure out how to add image to an existing image. Please help! I'm using CS5 extended 12.1 x64. Thanks!

    As I wrote if you want a square image and you have that many pixels.  I do not understand why you just do not want to crop.  If you have a lot of images to do it. It would be very time consuming to do what you just did for each image you would need to decide if you want to add to the top, bottom or top and bottom. The decide the best way the fill the added canvas for each image. Add the content  and blend it in.
    If your images are full camera image the are either  4:3 or 3:2 Landscape and 3:4 or 2:3 Portraits.  When you done all image will be square a 1:1 Aspect Ratio.  Center cropping normal camera images is a common practice.  It what commercial print shop do when you send the your images to be printed. Your print come back with 5:7, 8:10 or some other aspect ratio like 4:6 the only images that are not cropped are some of the  6"x4" prints if you have a 3:2 aspect ratio camera for print and camera have the same aspect ratio.  If you ask for a special print run of 5" x5" prints you would receive back center 1:1 cropped and for the most part be what you would want. Landscape images would have some image removed from both sides and portrait image some image off top and bottom.  An action could quickly make centered 1:1.  Here is your image image cropped that way.  In the action I used a plug-in I wrote years ago for making selection. The action is very simple. Select,Crop,Deselect,Set DPI to Print 5".  Look at the history palette.
    View my image in a new tab it you can not read it. there you can scale it to actual pixels. The site scale screen captures poorly.

  • How can I turn a pse file into a JPEG? (Ändern von PSE nach JPEG

    Ich kann an den vorliegen den Antworten keine Lösung erkennen.
    Wer kann helfen?
    Ich habe viele Bilddateien die noch unter PSE abgespeichert sind. Am elegantesten wäre es, wenn man die Umstellung blockweise vornehmen könnte und nicht einzeln ( wie z.B. speichern unter..)
    Danke im voraus
    freundliche Grüße
    Klaudie

    (Elements User:)
    Batch-Verarbeitung ist auch machbar: Da ist ein Ordner mit allen PSDs, die mit dem Befehl 'Mehrere Dateien verarbeiten' in JPEGs konvertiert werden koennen.
    Dann folgt ein Link zu einem erklaerenden Blog.
    (Barbara B:)
    Eine pse-Datei ist eine mehrseitige Datei, die in PSE kreiert wird, in einem Format, dass nur Elements benutzt.  Es handelt sich tatsaechlich um einen Ordner anstatt um eine Datei eines einzelnen Bildes.  Also, wenn Sie den Ordner oeffnen, dann koennen Sie die individuellen Seiten, die als psd-Dateien gespeichert sind, separat konvertieren.
    Gruss,
    Juergen

  • How can I turn this line and its intersection into a separate object?

    My initial object is #1, then I draw a line on #2.
    How can I turn the highlighted area into a separate object? (I cheated and filled this area with Photoshop, but I'd like to know how to turn this red area into a separate object so that I can fill it with Illustrator)
    Thanks in advance

    Alex,
    Or you may just Pathfinder>Divide and Ungroup.

Maybe you are looking for