How can I turn an audio podcast into a video for Youtube using iMovie?

Hey there, guys.
I'm trying to turn a podcast I created in Garageband into a movie using iMovie so I can upload it to YouTube. Now, for the duration of this podcast, I simply want one picture to show on the screen. So, in other words, the cast goes for about 55 minutes, so for the entirity of these 55 minutes, I just want one picture to show. That's all. Just one picture for the duration of the cast. How can I achieve this seemingly simple task using iMovie? Your aid with this is very much appreciated.
Cheers.

You create selections based on color range.
Mylenium

Similar Messages

  • How can I change a audio podcast into a video podcast?

    Hello,
    I'm currently using the lastest version of iTunes and have successfully imported all my music, movies, home videos, books, etc. I'm having an issue with iTunes U and Podcasts. The reasons is because I don't actually use them for the real purpose. Instead, I keep home movies in one and sporting events in another. I don't want to mix them in with the movies, so I thought I found a nice work around. Since these movies are my own, nothing was purchased through iTunes. The problem I'm encountering is that some of the videos have been recognized as videos and some others as audio versions of Podcasts or iTunes U. They are all labeled in as either podcasts/itunes u in the media type field, but I can't seem to find any option to get them solely as Podcasts > Video or iTunes U > Video.
    P.S. I also converted the files to Apple TV format, so file type shouldn't be the issue as they would all be the same. Can anyone shed some light? While they do transfer, the ones that show up in music only plays sound without the video.
    Thanks for any assistance!

    I figured out a workout around for anyone who may run into a similar problem.
    1) Delete Files from iTunes
    2) Use MetaX and Open Files (Choosing "Movie" as the type)
    3) Save Change to Files
    4) Load Files into iTunes
    5) Change Media Type (it will stay as video even if podcast or itunes U is selected).

  • How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?

    How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?
    I created a few images (pages for a site) on photoshop and want to turn them into HTML code for a website- Can i Just upload the file into one of these programs and make a file with the correct code imediatly?
    I was reading about using EDGE Reform but i did not understand if i can create the code with it, in the end it says it still needs to be sent to website developer after?

    You need to look at Dreamweaver as a code editor. You need to learn to create good, clean HTML code with style sheets to make websites with Dreamweaver.
    There are tutorials that will take you from a layered .PSD file to HTML. Here's a good one:
    http://net.tutsplus.com/tutorials/site-builds/from-psd-to-html-building-a-set-of-website-d esigns-step-by-step/
    Adobe's Muse is a semi-WYSIWYG website layout creator for small websites (1-5 pages). But there is no way you can go from a .PDS file to Muse, you have to start the site in Muse.
    I have seen a few Muse sites and they're OK, but there is some code that Muse creates that is kind of odd. If you want a good, clean website that will work for you or your business, Dreamweaver is the best choice. Alternatively, you could hire a pro.
    -Mark

  • How can I import MP3 audio files into premiere pro cs5?

    Can any one help?
    How can I import MP3 audio files into premiere pro cs5?

    It is really difficulty for me.If you still haven't found a satisfactory answer,please search it on google.Hope you can get your answer as soon as quickly!
    fifa 14 coins
    cheap fifa coins

  • How can I turn garage band files into mp3s?

    On my older Macbook i have always been able to easily turn my .band files into mp3s under the Advanced heading in itunes, but with my Macbook Pro, that is not an option. The option has become "Create AAC version". How can I turn my .band files into mp3s so that I can load them onto my web page and my students can pick them up as mp3s and put them on their devices?

    The option has become "Create AAC version".
    Your iTunes importing preferences are currently set to AAC. If you change your Importing preferences to mp3, the option should then become "Create mp3 version". See the following document for some more details:
    iTunes: How to convert a song to a different file format

  • How can i turn my iphone 4s into an ipod touch, the phone has been deactivated and has been recovered, i also do not have a sim card for the phone... can anyone help me.

    How can i turn my iphone 4s into an ipod touch, the phone has been deactivated and has been recovered, i also do not have a sim card for the phone... can anyone help me.

    http://support.apple.com/kb/ht3406
    Apple recommended process

  • How can i turn off all the mails that i recive when use any program form my iPad?

    How can i turn off all the mails that i recive when use any program form my iPad?

    Everytime i use the my ID recive an e Mail to inform me.

  • Turning my audio files into rss feed for podcasting

    I have been trying to figure this out for a while now and my brain is ready to explode!  My website is hopechurchla.com.  I am trying to make the audio files in our sermon archive into an RSS feed so that I can turn it into a podcast.  everything I read seems to say it is simple but it is skipping over the first step for me.  How do I place the rss feed into my page for the audio files.
    I may not even be asking this right... any help would be appreciated
    avery

    There is no need to do anything to your audio files to make them into an RSS feed. An RSS feed is simply a list of links and descriptions that people can subscribe to, written in xml language.
    You can use whatever type of audio files you might like, but you'll probably give a broader audiance access to the audio files if they are of the file type mp3.
    So store all your mp3s in a folder named "sermons" or whatever you may choose and then link to them in your .xml file.... this becomes the RSS feed. But be aware that viewers will need either a browser that can open RSS feed documents or some sort of New Reader like:
    http://email.about.com/od/rssreaderswin/tp/top_rss_windows.htm
    For a sample RSS feed:
    http://www.lynnjohnson.citradingcards.com/podcast.xml
    view the source code to see the structure.
    Or
    http://www.podcast411.com/howto_1.html
    .... tons of similar tutorials on line.
    But no... yuo don't do anything with the audio except perhaps make sure they are all mp3 files and stored in a separate folder.
    Best wishes,
    Adninjastrator

  • How Can I Turn A Software Loop Into A Real Instrument Loop?

    My primary reason for wondering about this is that one of my songs requires a windchime sound throughout...but not too much of one. Just a touch of windchimes. The Orchestra Kit has a few pretty good windchime sounds BUT the natural sustain is too long for what I want. If figure I can get my wisp of a windchime if I can convert my miniscule software loop into a real instrument loop then whittle it down to the sound I want.
    How can I make this conversion?

    Well, Hangtime...You were absolutely right (again!) about messing around with the notes preferred over dissecting them.
    I got an absolutely gorgeous windchime sound from applying a couple of carefully auditioned filters and then messing around with the volume at the end of each note. It actually turned out better than I had imagined. It turned out so very nice that I gave it a well spaced looping rhythm and now the windchime is throughout the entire song and the song is better for it.
    My dissection effort didn't get a natural sounding windchime effect at all. I trashed it almost immediately.
    hugs

  • How can I turn a smart phone into a dumb phone (for punishment when I still need her to have a phone)?

    I believe I am on the verge of needing to know how to turn my daughters phone into a dumb phone as a consequence.  I still need her to be able to call me, but not much else.  Anyone have any helpful hints?  She has a 5C.

    Remove all the email accounts that are on the device.
    Turn off FaceTime & iMessage.
    Create a new Apple ID using a new email address that you create, and that only you know the password to.
    Use that Apple ID for Settings > iCloud and Settings > iTunes & App Store.
    Delete all the third-party apps on the device.
    Go into Setting > Cellular and disable all apps from using cellular data (except Find My iPhone).  Or even disable Cellular data totally.
    Use the Restrictions option under Settings > General > Restrictions.  Create a Restrictions passcode that only you know
    Disable the ability to use everything from Safari down to Carplay under the Restrictions.
    Set all the allowed content to the most restricted options available.
    Set the Allow Changes in Restrictions to prevent allowing changes to Account, Cellular Data Use, ad maybe even volume limit.
    That pretty much makes it so she can make phone calls and use normal texting, but has no internet access, no way to browse online, no way to use any apps other than what's already pre-installed, can't use FaceTime, can't use the Camera, can't add email accounts to the device, can't change out the iCloud account, etc.  It basically dumbs the iPhone down as far as it can possibly go.

  • How can i turn an iphoto slideshow into a book?

    I am wondering how I can turn an iphoto slideshow into a book?

    No - you can make a book from the same photos but not form the slide show - smiply elect the same photos (probably in the album you made the slide show from) and make a new book from them
    LN

  • How can I turn OFF audio monitoring during capture from tape?

    FCP has a very useful check box that allows you to turn off audio monitoring during capture, so you can listen to other things whilst the batch captures.  Is there any way to do this in PP?  If not, how can I make a feature request?
    I'm using PP CS6.
    Thanks for any help.
    Dominic

    The only other solution I can offer is to go to "edit" "preferences" then select "playback". Under playback set the default audio device to your capturing device instead of the adobe desktop audio. This will allow you capture but not have to listen to whats being captured. However once it's done capturing you'll have to set it back to adobe desktop audio otherwise you can't hear what you're editing in your timeline.
    Other than that I'm out of ideas sorry.

  • How can I turn a pse file into a jpeg

    Today I created a pse file by the photo collage device. This is the only p file I have, and I would like to know if it is possible to convert this into a jpeg, and if so how? Thank you,
    Ian Julian
    www.natureandpictures.com

    Thank you for that.  As I have
    so many pictures in Orgainizer, I try to convert every file into a jpeg, as there is less
    memory, it is quicker, and I can use them for emails creations etc.
    Ian Julian
    www.natureandpictures.com

  • How can I add manually-downloaded podcasts into the iTunes Podcase lists?

    I see no way to "import" an existing podcast MP3 file into the Podcast screen so it shows up in an existing Podcast list. I need this because I have older podcast episodes which the downloaded subscriptions do not include anymore, but these old episodes really belong in the same podcast list as the newer ones.
    This is a glarimg omission that makes the podcast screen inflexible and hard to use - plz help!
    Thanks,
    /Mark
    Lenovo ThinkPad T60   Windows XP Pro   it's a wide screen

    I tried doing that but it didn't work.
    Anybody know the magic to make this work?

  • How can I load a .xlsx File into a SQL Server Table using a Foreach Loop Container in SSIS?

    I know I've REALLY struggled with this before. I just don't understand why this has to be soooooo difficult.
    I can very easily do a straight Data Pump of a .xlsX File into a SQL Server Table using a normal Excel Connection and a normal Excel Source...simply converting Unicode to DT_STR and then using an OLE DB Destination of the SQL Server Table.
    If I want to make the SSIS Package a little more flexible by allowing multiple .xlsX spreadsheets to be pumped in by using a Foreach Loop Container, the whole SSIS Package seems to go to hell in a hand basket. I simply do the following...
    Put the Data Flow Task within the Foreach Loop Container
    Add the Variable Mapping Variable User::FilePath that I defined as a Variable and a string within the FOreach Loop Container
    I change the Excel Connection and its Expression to be ExcelFilePath ==> @[User::FilePath]
    I then try and change the Excel Source and its Data Access Mode to Table Name or view name variable and provide the Variable Name User::FilePath
    And that's when I run into trouble...
    Exception from HRESULT: 0xC02020E8
    Error at Data Flow Task [Excel Source [56]]:SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occured. Error code: 0x80004005.
    Error at Data Flow Task [Excel Source [56]]: Opening a rowset for "...(the EXACT Path and .xlsx File Name)...". Check that the object exists in the database. (And I know it's there!!!)
    I don't understand by adding a Foreach Loop Container to try and make this as efficient as possible has caused such an error unless I'm overlooking something. I have even tried delaying my validations and that doesn't seem to help.
    I have looked hard in Google and even YouTube to try and find a solution for this but for the life of me I cannot seem to find anything on pumping a .xlsX file into SQL Server using a Foreach Loop Container.
    Can ANYONE please help me out here? I'm at the end of my rope trying to get this to work. I think the last time I was in this quandry, trying to pump a .xlsX File into a SQL Server Table using a Foreach Loop Container in SSIS, I actually wrote a C# Script
    to write the contents of the .xlsX File into a .csv File and then Actually used the .csv File to pump the data into a SQL Server Table.
    Thanks for your review and am hoping and praying for a reply and solution.

    Hi ITBobbyP,
    If I understand correctly, you want to load data from multiple sheets in an .xlsx file into a SQL Server table.
    If in this scenario, please refer to the following tips:
    The Foreach Loop container should be configured as shown below:
    Enumerator: Foreach ADO.NET Schema Rowset Enumerator
    Connection String: The OLE DB Connection String for the excel file.
    Schema: Tables.
    In the Variable Mapping, map the variable to Sheet_Name, and change the Index from 0 to 2.
    The connection string for Excel Connection Manager is the original one, we needn’t make any change.
    Change Table Name or View name to the variable Sheet_Name.
    If you want to load data from multiple sheets in multiple .xlsx files into a SQL Server table, please refer to following thread:
    http://stackoverflow.com/questions/7411741/how-to-loop-through-excel-files-and-load-them-into-a-database-using-ssis-package
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for