How can I turn off compatibility with 7.1 when labview 8 converts my 7.1 code?

Hi,
I just loaded LV8 on my mac. It converted/compiled my app code to 8. While doing that, it changed many of my constants to hidden controls to maintain combabtibility with 7.1. I really don't care about 7.1 anymore. Is there a way to turn this off so I can re-compile the code and keep it the way it is?
Obviously, I am new to LV but I don't see a reason for keeping the compatibility with 7.1 if my lab is going to 8.
Any thoughs, comments, or critisims would be appreciated.
tarek316

The particular issue you're talking about isn't necessarily "compatibility" with LabVIEW 7.1...it's actually ensuring that your VIs behave the same in 8.0 as they did in 7.1.  As described in that dialog box, a change was made in LabVIEW 8.0 regarding how VI diagrams are compiled in regards to Case Structures with cases that will never run.  If you are using case structures with constants wired to their selectors purely to keep VIs in memory at particular points in your code, then you should heed the advice given in the context help for the created control and use a Static VI Reference in your code instead of a subVI in a case structure.  If you are using case structures with constants wired to their selectors to comment out code, perhaps you should use the Diagram Disable structure instead.
-D 
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Similar Messages

  • How can I turn off lots of failure popups when starting my mac?

    Dear community!
    Everytime I change my network, I get failure popups caused by missing server connection. How can I turn these messages off?
    I know the reason: at work I have lots of connections to different server and of course I don't have them at home.
    It's boring to click up to 10 times at these error popups to close them.
    Does anybody know how I can solve this issue?
    THX in advance for your help!
    Regards, Tina

    Please take each of the following steps that you haven't already tried. Back up all data before making any changes.
    Step 1
    Boot in safe mode.
    Log in and see whether you still have the problem. If you don't, it's caused by one of your login items or a system modification that loads at startup or login. Ask if you need help identifying it. A common offender is "Adobe Synchronizer," which is a component of some Adobe products.
    Step 2
    Triple-click the line below to select it, then copy the text to the Clipboard (command-C):
    ~/Library/PDF Services
    In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. A folder may open. If it does, move the contents to the Desktop, or to a new folder on the Desktop. Log out and log back in. Test. If there's no change, put the items you moved back where they were and continue.
    Step 3
    Open the folder
    ~/Library/Preferences
    as in Step 2 and move the following items in that folder to the Trash, if they exist:
    com.apple.recentitems.plist
    loginwindow.plist
    Log out and back in again, and test.
    Step 4
    Other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, and bookmarks in the Preview application.
    Try rebuilding the iPhoto library.

  • How can I turn off the information that prints when a photo is emailed to printer?

    I need to stop the printer from printing the first page when sending an email to the printer's email address.

    There currently isn't an option to turn off the printing of the email.
    I am an HP employee

  • How can I turn off Respond with text option on iphone 5s

    I would like to disable the respond with text option, several times while taking the phone out of my pocket I responded to call I wanted to answer

    Try this:
    Go to Settings/General/Passcode lock/ Allow access when locked/disable
    Reply with message

  • How can I turn off the Typekit font check when opening files in InDesign

    Adobe InDesign CC, Version 9.2.1 x32
    Windows 7 Professional 64 bit
    Every time I open an existing file in InDesign which is using a font I have installed on my PC I get the following message:
    "No matches were found on TypeKit, click "Find Font" to replace with fonts that exist on your computer"
    I'm able to click on Find Font and then select the font that TypeKit is unable to find - can I stop it checking for this as I have the font installed on my local machine?
    Many thanks.

    Hi Adrian,
    I'm sorry that you ran into trouble with this. Some users have reported an issue in the current version of InDesign which can temporarily deactivate installed fonts. Please note that this is actually unrelated to Typekit; it just happens to occur at the time you see our logo in the missing fonts window.
    The InDesign team is still investigating the factors which trigger this situation, but the basic issue is this: the Missing Fonts dialog causes fonts which are managed through Extensis Suitcase and FontExplorer to not auto-activate correctly, or for managed fonts to even be visible in the application after upgrade.
    In both cases, the InDesign Missing Fonts dialog appears to override the Font Management tool dialogs that allow users to manage fonts within the Application.
    If you use Suitcase Fusion, there is a simple configuration change needed:
    1. close the Missing Fonts window
    3. go to the Type menu and select "Suitcase Fusion 5".
    3. From the submenu, choose "Library" and then check "All Libraries" so all fonts can be auto-activated as needed
    4. from the Type menu, select "Suitcase Fusion 5" again, and then "Check Document’s Fonts" to activate the missing fonts,
    If the font is being managed by Suitcase, it will find and update the fonts.
    In FontExplorer, if your managed fonts are not visible in InDesign after upgrading to InDesign 9.2
    Go to FontExplorer/Tools and select
    1. Clean System Font Caches (this will require a system reboot)
    2. Clean Application Font Caches
    On non-Mavericks systems, you will need to de-activate and then reactivate font protection.  Launch a terminal window and enter
    sudo atsutil fontprotection -off
    Then enter
    sudo atsutil fontprotection -on
    Relaunch InDesign. your managed fonts should now be visible and auto-activation should work.
    The fonts can always be activated from within the Font Management software itself, even with the missing fonts dialog open.
    The InDesign team is looking into the issue to determine the root cause as well; our apologies for any inconvenience it causes in the meantime.
    Cheers,
    Benjamin

  • How can I turn off the delivery of mail when I turn on the program. I want it wait until I click the get mail button before it brings the mail over

    I do not want the program to bring over my mail until I click the get mail button. I look at my mail on my providers site and delete the item I do not want to look at before going to Thunderbird to actually read it. And I do not want to receive any mail that might come to me until I can determine if I want to read it first.

    Disable 'Check for new messages at startup' in your Account Settings.

  • How can I turn off the variable width font when writing a message?

    I have set up my email message file to use Arial 14 font. When starting a message (either original or reply) it defaults to this font. However, if at any time I move the curser with the mouse, mouse pad, the end key or an arrow key to a location to the right or below the text already typed, it automatically changes to the "variable width" font.
    This requires me to manually change the font back to Arial, or backspace back to the last text typed with Arial Very, very annoying.

    Firefox doesn't do email, it's a web browser.
    If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
    If your problem is with Mozilla Thunderbird, see this forum for support.
    [http://www.mozillamessaging.com/en-US/support/] <br />
    or this one <br />
    [http://forums.mozillazine.org/viewforum.php?f=39]

  • How can i turn off passcode when the option is greyed out

    how can i turn off passcode in iPhone 4S when the option is greyed out?

    You can't. Do you have an Exchange account on the phone? If so, the ability to disable the passcode can be restricted by a profile installed when setting up the Exchange account.

  • In a Google search, clicking on a search result causes the new page to open with the search terms highlighted in yellow -- how can I turn off th

    In a Google search within a Firefox session, clicking on a search result causes the new page to open with the search terms highlighted in yellow -- how can I turn off this highlighting?

    Try to clear the Google cookies and redo those Google options.
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

  • I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset?

    I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset/earphones?

    Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.

  • How can I turn off Recently Websites when opening new Safari window? After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed.

    How can I turn off Recently Visited Websites when opening new Safari window?
    After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed. How can I turn this function off? I do NOT want my new Safari windows to have history displayed of previous websites I visited. I only want my Favorites (on the top) to be displayed. Please help.
    Thank you for your time, patience, understanding, kindness, and concern.

    Thanks for replying, but that isn't the answer I am looking for.  Also, there is no + sign, UNLESS you do tap the overlapping boxes.
    Let me try to ask my question a little more clearly:
    When I tap the two overlapping boxes on the lower left (the option to Open New Windows), the new Window that appears will show your Bookmarked FAVORITES. But with my new iPhone 6, and the new iOS 8.0.2, when I tap the two boxes to open a New Window, my Bookmark Favorites show (as they always have and should), but below them, there is a dividing line underneath them, and it says Recently Viewed Websites, and has these websites available to tap.
    So my question is, HOW DO I TURN THESE OPTION OFF?
    *UPDATE  (10.13.14): Since I have asked this question, I no longer see these Recently Viewed Websites under my Bookmarked Favorites in my new Window tabs. So I hope that Apple fixed it, or somehow it was a mistake, or somehow I changed an Option on my iPhone 6 that stopped this for reoccurring.
    Thank you for your help bobseufert! I appreciate your concern, kindness, and the time to try to help. I am grateful.
    Have a blessed day.

  • Why i cant watch youtube as youtube inform this "This video is unavailable with safety Mode enabled. To view this video, to need to disable safety mode" how can i turn off safety mode

    Why i cant watch youtube as youtube inform this "This video is unavailable with safety Mode enabled. To view this video, to need to disable safety mode" how can i turn off safety mode
    Why i cant watch youtube as youtube inform this "This video is unavailable with safety Mode enabled. To view this video, to need to disable safety mode" how can i turn off safety mode

    You need to disable Safety Mode at the bottom of the YouTube page. More info here:
    https://support.google.com/youtube/answer/174084?hl=en

  • How can I turn off the WLS 6.1 security in order to develop my own application-based security module?

    Dear Colleagues,
    I am currently developing a J2EE application using WLS 6.1.
    My team and I have to implement a security requirement to suit our company's needs.
    The security requirements are that, users' password need to be aged (30 days maximum) and we need to provided a GUI front-end (JSP) to allow users to change their password when these expire after 30 days.
    Our internal contacts in the company, have already taken the lead to find out about whether we will be able to use the WLS 6.1 platform to do this and the answer we got back, was.
    Now we need to develop our own security module.
    I have 2 questions:
    1. How can we turn off the WLS security in order develop our own application-based security module?
    2. How can we develop a security module that allows us to age users' password and provide them with facilities to change their passwords when these expire?
    At the moment, we are using the default BEA WebLogic login.jsp page and there some configuration in the web.xml for this. I will be grateful if you could advise me on how to turn this default security off so that we can write our own security module.

    hi,
    1.You can write your own realm in 61 which can plugged for your security
    calls.
    2. once you write your ownrealm.. you can access it through weblogic
    api/ur api..
    thanks
    kiran
    "Richard Koudry" <[email protected]> wrote in message
    news:3dd0d081$[email protected]..
    Dear Colleagues,
    I am currently developing a J2EE application using WLS 6.1.
    My team and I have to implement a security requirement to suit ourcompany's needs.
    >
    The security requirements are that, users' password need to be aged (30days maximum) and we need to provided a GUI front-end (JSP) to allow users
    to change their password when these expire after 30 days.
    >
    Our internal contacts in the company, have already taken the lead to findout about whether we will be able to use the WLS 6.1 platform to do this and
    the answer we got back, was.
    >
    Now we need to develop our own security module.
    I have 2 questions:
    1. How can we turn off the WLS security in order develop our ownapplication-based security module?
    >
    2. How can we develop a security module that allows us to age users'password and provide them with facilities to change their passwords when
    these expire?
    >
    At the moment, we are using the default BEA WebLogic login.jsp page andthere some configuration in the web.xml for this. I will be grateful if you
    could advise me on how to turn this default security off so that we can
    write our own security module.

  • How can I turn off the sound from the original midi  or audio tracks when I turned on the duplicate tracks for editing ?

    How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
    I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

    Dan,
    It sounds like one of your preferences has changed.
    Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
    This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
    One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
    Hope that helps

  • How can I turn off other languages on my ipad running ios7?  It has Japanese or Chinese and the international keyboard is set to English.  Thank you.

    How can I turn off other languages on my ipad the next generation running ios7?  I have the international language set to English but it's showing a foreign language and sometimes it shows the foreign language with English.  Thank you.

    The complete backup and restore procedure is explained in the link above.
    If you don't want to do a restore, then your iPad may remain in the unstable state you have for the moment.
    You can change the country in the App Store. Have a look at the bottom of the App Store screen, you can change the country and also do the permanent change via Manage > Account.
    You can change the language in iTunes via General Preferences > under General tab.

Maybe you are looking for