How can I turn off login keychain?

How can I turn off login keychain prompt?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select Keychain Access ▹ Preferences ▹ First Aid. If the box labeled Keep login keychain unlocked is not checked, check it.
Select Keychain Access ▹ Keychain First Aid from the menu bar and repair the keychain. Quit Keychain Access.

Similar Messages

  • How can i turn off login (username) history (gmail, yahoo mail, etc.) I use 12.0 version.

    I have entered my login in gmail and firefox remembered it. I don't want that firefox remebered my usernames.

    See:
    * https://support.mozilla.org/en-US/kb/make-firefox-remember-usernames-and-passwords#w_viewing-and-deleting-passwords

  • How can I turn off Keychain from asking for my password EVERY time I check for mail?

    how can I turn off Keychain from asking for my password EVERY time I check for mail?
    This is really driving me nuts.....
    Thanks

    Choose Apple menu > System Preferences, click Security & Privacy, and then click General. 
    Open the General pane of Security & Privacy preferences
    2.     Select “Require password...NEVER after sleep or screen saver begins.”  You can adjust the amount of delay before a password is required in the pop-up menu.
    From what I am aware, you cannot turn off the keychain.
    I hope this helps.
    This is also a link that might help http://macs.about.com/od/systempreferences/ss/Mac-Security-Using-The-Mac-Securit y-Preference-Pane_2.htm

  • How can I turn off the WLS 6.1 security in order to develop my own application-based security module?

    Dear Colleagues,
    I am currently developing a J2EE application using WLS 6.1.
    My team and I have to implement a security requirement to suit our company's needs.
    The security requirements are that, users' password need to be aged (30 days maximum) and we need to provided a GUI front-end (JSP) to allow users to change their password when these expire after 30 days.
    Our internal contacts in the company, have already taken the lead to find out about whether we will be able to use the WLS 6.1 platform to do this and the answer we got back, was.
    Now we need to develop our own security module.
    I have 2 questions:
    1. How can we turn off the WLS security in order develop our own application-based security module?
    2. How can we develop a security module that allows us to age users' password and provide them with facilities to change their passwords when these expire?
    At the moment, we are using the default BEA WebLogic login.jsp page and there some configuration in the web.xml for this. I will be grateful if you could advise me on how to turn this default security off so that we can write our own security module.

    hi,
    1.You can write your own realm in 61 which can plugged for your security
    calls.
    2. once you write your ownrealm.. you can access it through weblogic
    api/ur api..
    thanks
    kiran
    "Richard Koudry" <[email protected]> wrote in message
    news:3dd0d081$[email protected]..
    Dear Colleagues,
    I am currently developing a J2EE application using WLS 6.1.
    My team and I have to implement a security requirement to suit ourcompany's needs.
    >
    The security requirements are that, users' password need to be aged (30days maximum) and we need to provided a GUI front-end (JSP) to allow users
    to change their password when these expire after 30 days.
    >
    Our internal contacts in the company, have already taken the lead to findout about whether we will be able to use the WLS 6.1 platform to do this and
    the answer we got back, was.
    >
    Now we need to develop our own security module.
    I have 2 questions:
    1. How can we turn off the WLS security in order develop our ownapplication-based security module?
    >
    2. How can we develop a security module that allows us to age users'password and provide them with facilities to change their passwords when
    these expire?
    >
    At the moment, we are using the default BEA WebLogic login.jsp page andthere some configuration in the web.xml for this. I will be grateful if you
    could advise me on how to turn this default security off so that we can
    write our own security module.

  • How can I turn off the FileVault?

    How can I turn off the FileVault? It keeps saying 'Encryption paused', even I connected the power adapter.
    What impacts does it have on my Macbook Pro if I cannot turn off the FileVault?
    Thank you!

    If you don't already have a current backup of all data, back up before proceeding. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
    In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
    Then, from the menu bar, select
              File ▹ Turn Off Encryption
    Enter the password again.
    You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
    If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
              Mac OS Extended (Journaled)
    from the Format menu.
    You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
    Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe.

  • How can I turn off my battery percentage warning?

    HI, how can I turn off the battery warning on my 4s phone? It freezes up my aps if I am using them when it comes on of when any pop up warning comes on like wifi network indicators. I can turn those off but not the battery thing.

    You can let Apple know here http://www.apple.com/feedback/

  • How can I Turn off my AppleTV

    How can I turn off my Apple TV?

    There is no power switch. You cannot turn off your Apple TV. You can only put it in standby (sleep) mode. To power the unit off your only option is to pull the plug.

  • How can i turn off my apple tv

    how can I turn off my apple tv? i can't , i don't know how...

    You don't. Just don't use it for a while and it will go to sleep, but it cannot be completely turned off (aside from unplugging it).

  • How can I turn off the yellow pop-up tool tips?

    Howdy,
    I have searched high and low in the preferences and found nothing that does the trick. How can I turn off the yellow pop-up tool tips?
    See attached screen shot. They are incredibly annoying. It's probably obvious, but I cannot find it anywhere on internets or this forum.
    Thanks!

    Thanks Nancy. Unfortunately that doesn't do it. I turned those off awhile back. Nor can I find anything under VIEW that seems to make a difference.  Just FYI: I'm on a Mac OS w/Dreamweaver CS6 - but this has happened on previous versions of DW. Thanks again.

  • How can I turn off the sound from the original midi  or audio tracks when I turned on the duplicate tracks for editing ?

    How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
    I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

    Dan,
    It sounds like one of your preferences has changed.
    Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
    This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
    One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
    Hope that helps

  • How can I turn off sound controll whele on the Satellite A200

    How can I turn off the external sound controll in front of laptop - the wheel? It does not work, sound volume is permanently muted.
    OS: MS Windows XP
    Thanks

    Thank you Jaba,
    it is Toshiba Satellite A200 Series. Drivers, its configuration and configuration of operating system is OK. The wheel is mechanical damaged, so that is the point. I have to disable its function in operating system. But where can I disable it? I have tried to uninstall Toshiba utilities (controls, hotkeys), reinstall drivers. I have tried to find an option in BIOS, there was no one.
    btw: I am a linux administrator, but I have advanced knowledge of windows systems so you can be short.

  • In a Google search, clicking on a search result causes the new page to open with the search terms highlighted in yellow -- how can I turn off th

    In a Google search within a Firefox session, clicking on a search result causes the new page to open with the search terms highlighted in yellow -- how can I turn off this highlighting?

    Try to clear the Google cookies and redo those Google options.
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

  • I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset?

    I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset/earphones?

    Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.

  • How can I turn-off the apps which I have opened once in ISO 7.0.2. In previous version of ISO it was easy to turn- the opened apps by double clicking on home button and then click and hold on respective apps then click on cross sign.

    How can I turn-off the apps which I have opened once in ISO 7.0.2. In previous version of ISO it was easy to turn-off the opened apps by double clicking on home button and then click and hold on respective apps then click on cross sign but in this version I could not do so and my iPad appears slower.

    Close inactive apps
    1. Double tap the home button to bring up the multi-tasking view
    2. Swipe the app's windows upwards to close
    3. The app will fly off the screen

  • How can I turn off other languages on my ipad running ios7?  It has Japanese or Chinese and the international keyboard is set to English.  Thank you.

    How can I turn off other languages on my ipad the next generation running ios7?  I have the international language set to English but it's showing a foreign language and sometimes it shows the foreign language with English.  Thank you.

    The complete backup and restore procedure is explained in the link above.
    If you don't want to do a restore, then your iPad may remain in the unstable state you have for the moment.
    You can change the country in the App Store. Have a look at the bottom of the App Store screen, you can change the country and also do the permanent change via Manage > Account.
    You can change the language in iTunes via General Preferences > under General tab.

Maybe you are looking for