How can I turn off organizer update?

How can I turn off elements organizer update?

In your Adobe Application Manager you have something like this:
Remove the tick marks (I believe you guys call it check marks) against the product for which you don't need updates. See the red boxed item. Also make sure the right side has the two ticks as shown because that is always required.
G/L

Similar Messages

How can I turn off upgrade/update to Yosemite?

Having tried the Yosemite Beta, I've decided to stay with Mavericks for a while. How can I turn off the notification / blandishment / request asking me to upgrade / update to Yosemite so I don't inadvertently wipe out the hours & hours of effort it's taken me to revert to Mavericks on my MacBook Pro?
I'm not opposed to going to Yosemite, but I need to be able to afford to upgrade from 2Gb RAM in this old MacBook Pro before it will make any sense.

In your Adobe Application Manager you have something like this:
Remove the tick marks (I believe you guys call it check marks) against the product for which you don't need updates. See the red boxed item. Also make sure the right side has the two ticks as shown because that is always required.
G/L

How can i turn off auto-update?

This auto update feature is driving me crazy. i recently downloaded songs from my cds onto my computer. I then put these songs onto my ipod shuffle and they all played fine. i do not want to keep all these songs on my computer, so i deleted them. but when i plugged my ipod back into my computer, it automatically deleted those songs b/c they were no longer on my computer. does anyone know how to turn this feature off (in itunes 5)? thanks!

Natty,
You don't have to use the
b Autofill
feature with your
i shuffle.
See its FAQ :
Autofill actually requires some action. You can manually click on Autofill each time you insert iPod shuffle, or you can use the "Keep this iPod in the source list" option to click Autofill any time and then connect iPod shuffle.
This lets you manually select what songs you want to add to the
i shuffle
, but that does
b not
allow you to add songs that aren't on your computer.
The
i shuffle
is the one member of the iPod family that doesn't give you the option to
i Manually manage songs and playlists.
For some more information, have a look at:
deggie, "How do i stop ipod shuffle updating from library" #2, 08:30am Jul 25, 2005 CDT

How can I turn off the message that keeps bugging me to update to Firefox 6.0?

How can I turn off the message that keeps bugging me to update to Firefox 6.0? Given the problems and incompatibilities with 5.0 I have no intention of upgrading until it's absolutely necessary!

Settings>General>Accessibility>Voice Over change to off.
PJRS

How can I turn off the daily nagging about software updates?

How can I turn off the daily nagging about software updates?
I am _very_ annoyed at having to answer this every day, day after day after day.

Thanks, PJRS.
But if I'm reading that right, the only way to get the nagging to stop is to accept all the download that Software Downloads suggest.
Quite often it pertains only to software I never use. In these cases, I'm not interested in downloading it.
And also -- if I'm understanding that document -- I have to respond every time the nagging drops down (at least once per day).
99% of the time I have no desire to download the suggested software.
In ANY case, it is outrageous that the software resorts to harassing a customer without at least a readily visible means to turning it off
SO -- please let me know what I'm misunderstanding -- thanks..

I have Photoshop cs5, version 12.0.5. I keep being offered an "Update" to 12.0.4 and am puzzled. How can I turn off this offer or should this update be applied?

I have Photoshop cs5, version 12.0.5 x32 installed on a Widows box. I keep being offered an "Update" to 12.0.4 and am puzzled. How can I turn off this offer or should this update be applied? If it should be applied how to do it. When I try it, the update fails.
Thanks!

I found the answer in another forum thread...

How can I turn off Recently Websites when opening new Safari window? After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed.

How can I turn off Recently Visited Websites when opening new Safari window?
After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed. How can I turn this function off? I do NOT want my new Safari windows to have history displayed of previous websites I visited. I only want my Favorites (on the top) to be displayed. Please help.
Thank you for your time, patience, understanding, kindness, and concern.

Thanks for replying, but that isn't the answer I am looking for. Also, there is no + sign, UNLESS you do tap the overlapping boxes.
Let me try to ask my question a little more clearly:
When I tap the two overlapping boxes on the lower left (the option to Open New Windows), the new Window that appears will show your Bookmarked FAVORITES. But with my new iPhone 6, and the new iOS 8.0.2, when I tap the two boxes to open a New Window, my Bookmark Favorites show (as they always have and should), but below them, there is a dividing line underneath them, and it says Recently Viewed Websites, and has these websites available to tap.
So my question is, HOW DO I TURN THESE OPTION OFF?
*UPDATE (10.13.14): Since I have asked this question, I no longer see these Recently Viewed Websites under my Bookmarked Favorites in my new Window tabs. So I hope that Apple fixed it, or somehow it was a mistake, or somehow I changed an Option on my iPhone 6 that stopped this for reoccurring.
Thank you for your help bobseufert! I appreciate your concern, kindness, and the time to try to help. I am grateful.
Have a blessed day.

How can I turn off the option in my message settings so that others can not tell that I have read there texts? Please HELP

How can I turn off the option in my message settings so that others can't tell that I have read there message I have an iphone4 updated to the 6ios

Set Settings->Messages->Send Read Receipts to Off.

How do I turn off automatic updates?

How do I turn off automatic updates on a Galaxy S5?
I would like to select manually the updates I want.

That was exactly what I was looking for and it did the job.Thank you. David
You can easily judge the character of a man by how he treats those who can do nothing for him.
Personal information removed as required by Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

How can I turn off base64 email encoding in iPlanet Process Manager?

Email sent out from a workflow running in the Process
Manager seems to be base64 encoded. How can I turn
off the encoding?

No worries. Typically you can rename a machine by just changing the name System Preferences -> Sharing. But there is also a command line option to adjust the name, and if you don't use the command line option, the server freaks out and will alert you about the change forever. ie - for servers, you need to use the command I describe below.
The command is called changeip and can be run from command line in Terminal.app. It is for manually chaning the ip address and or name of a machine. It basically has 4 parameters: old ip address, new ip address, old machine name, new machine name.
Basically the command looks like this:
sudo changeip OLDIPADDRESS NEWIPADDRESS OLDNAME NEWNAME
If any value is being kept the same, just repeat the identical information as both the old and new value.
Example 1: Changing the IP address and host name. This would update the machine's ip address to be 192.168.1.2 and its name would be update to my_new_name.
sudo changeip 192.168.1.1 192.168.1.2 my_old_name my_new_name
Example 2: Keeping the IP address the same but updating the name. This would update the machine's name to my_new_name but would keep the same ip address.
sudo changeip 192.168.1.1 192.168.1.1 my_old_name my_new_name
Most likely you're just wanting to update the name, in which case you should follow the second example. If you run this, be sure to reboot the machine afterwards and test to make sure that any enabled services are running properly.

How can I turn off the phone saying "Call from" #/name when getting incoming call.

How can I turn off the phone saying "Call from" #/name when getting incoming call before the ring tone starts? I have a LG accolade

I recommend checking your prompts and alerts to turn this feature off. This may be you "Call Connect" or "Readout" alerts. Listed below are steps to update this feature.
With the flip open, press the Voice Command Key (on the left side of the phone).The Voice Commands feature has several settings which allow you to customize how you want to use it. Access Voice Commands, then press the Right Soft Key[Settings]. Your choices are below:
-Confirm Choices--- Automatic/Always Confirm/ Never Confirm
-Sensitivity--- Control the sensitivity as More Sensitive/ Automatic/Less Sensitive
-Adapt Voice ---If the phone often asks you to repeat voice command,train the phone to recognize your voice patterns.Train Words/ Train Digits
Prompts ---Mode/ Audio Playback/Timeout
* For Mode, set Prompts/ Readout+ Alerts/ Readout/ Tones Only.
* For Audio Playback, set Speakerphone or Earpiece.
* For Timeout, set 5 seconds or 10seconds.

How can I turn off the Download pop up Window from displaying when downloading a file?

How can I turn off the Download pop up Window from displaying when downloading a file?

To not display the built-in Firefox downloads window, Tools > Options > General tab, un-check "Show the Downloads window when downloading a file". See: http://support.mozilla.com/en-US/kb/Options+window+-+General+panel
If you have some other download manager installed, you will need to see the documentation for the download manager.
 
You have installed plugins with known security issues that should be updated. To see the plugins submitted as part of your question post, click "More system details..." to the right of you original question.
*Shockwave Flash 10.1 r53
*Next Generation Java Plug-in 1.6.0_18 for Mozilla browsers
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from one of the links below; '''the links take you directly to the download and you avoid the "getplus" download manager and "extras" (i.e., toolbars, virus scan links, etc.) on the main Adobe page.'''
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download links and other information''':
#** https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#** '''or''' you can download, save, then run the manual installers for IE, then for Firefox (and all other browsers) from here: http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
#* After the installation, start Firefox and check your version again.

How can I turn off the WLS 6.1 security in order to develop my own application-based security module?

Dear Colleagues,
I am currently developing a J2EE application using WLS 6.1.
My team and I have to implement a security requirement to suit our company's needs.
The security requirements are that, users' password need to be aged (30 days maximum) and we need to provided a GUI front-end (JSP) to allow users to change their password when these expire after 30 days.
Our internal contacts in the company, have already taken the lead to find out about whether we will be able to use the WLS 6.1 platform to do this and the answer we got back, was.
Now we need to develop our own security module.
I have 2 questions:
1. How can we turn off the WLS security in order develop our own application-based security module?
2. How can we develop a security module that allows us to age users' password and provide them with facilities to change their passwords when these expire?
At the moment, we are using the default BEA WebLogic login.jsp page and there some configuration in the web.xml for this. I will be grateful if you could advise me on how to turn this default security off so that we can write our own security module.

hi,
1.You can write your own realm in 61 which can plugged for your security
calls.
2. once you write your ownrealm.. you can access it through weblogic
api/ur api..
thanks
kiran
"Richard Koudry" <[email protected]> wrote in message
news:3dd0d081$[email protected]..
Dear Colleagues,
I am currently developing a J2EE application using WLS 6.1.
My team and I have to implement a security requirement to suit ourcompany's needs.
>
The security requirements are that, users' password need to be aged (30days maximum) and we need to provided a GUI front-end (JSP) to allow users
to change their password when these expire after 30 days.
>
Our internal contacts in the company, have already taken the lead to findout about whether we will be able to use the WLS 6.1 platform to do this and
the answer we got back, was.
>
Now we need to develop our own security module.
I have 2 questions:
1. How can we turn off the WLS security in order develop our ownapplication-based security module?
>
2. How can we develop a security module that allows us to age users'password and provide them with facilities to change their passwords when
these expire?
>
At the moment, we are using the default BEA WebLogic login.jsp page andthere some configuration in the web.xml for this. I will be grateful if you
could advise me on how to turn this default security off so that we can
write our own security module.

How can I turn off my battery percentage warning?

HI, how can I turn off the battery warning on my 4s phone? It freezes up my aps if I am using them when it comes on of when any pop up warning comes on like wifi network indicators. I can turn those off but not the battery thing.

You can let Apple know here http://www.apple.com/feedback/

How can I Turn off my AppleTV

How can I turn off my Apple TV?

There is no power switch. You cannot turn off your Apple TV. You can only put it in standby (sleep) mode. To power the unit off your only option is to pull the plug.

How can I turn off organizer update?

Similar Messages

Maybe you are looking for