How can i turn off siri because it is blocking its normal operation?

How can I turn off siri? my iphone 4s was still functioning perfectly but but when siri was accidentally turned on I can no longer access it.How can I solve this problem?

Go to Settings > General > Siri > Turn Off.

Similar Messages

  • Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

    Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
    Thank you for all of your answer.

    I've seen it mentioned on here that a PRAM reset may solve it:
    Reset PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P and R.
    You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • How can I turn off the sound from the original midi  or audio tracks when I turned on the duplicate tracks for editing ?

    How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
    I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

    Dan,
    It sounds like one of your preferences has changed.
    Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
    This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
    One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
    Hope that helps

  • How can I turn off the images of avatars that post...

    how can I turn off the images of avatars that post in this forum? they are annoying.

    I think the avatar pictures help a lot to visually tell apart the different users participating. Pictures are way quicker to discern than user names are.
    Do you want them removed because they distract you or you find certain ones disturbing (You can easily flag those to the moderation team)?
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • How can i turn off charging beep?

    how can i turn off charging beep?

    Use the mute/silent switch on the side of the phone. After that it will vibrate if you connect to charge it using the computer or adapter. You might want to turn the volume on again after that, because that will also mute your ringtone.
    Message was edited by: Ingo2711

  • How can I turn off upgrade/update to Yosemite?

    Having tried the Yosemite Beta, I've decided to stay with Mavericks for a while. How can I turn off the notification / blandishment / request asking me to  upgrade / update to Yosemite so I don't inadvertently wipe out the hours & hours of effort it's taken me to revert to Mavericks on my MacBook Pro?
    I'm not opposed to going to Yosemite, but I need to be able to afford to upgrade from 2Gb RAM in this old MacBook Pro before it will make any sense.

    In your Adobe Application Manager you have something like this:
    Remove the tick marks (I believe you guys call it check marks) against the product for which you don't need updates.  See the red boxed item.  Also make sure the right side has the two ticks as shown because that is always required.
    G/L

  • How can I turn off the autocomplete/autofill function in Mail?

    How can I turn off the autocomplete / autofill function in Mail (Mail 7.2)? I know how to remove email addresses from the 'Previous recipient' list, but I simply want to deactivate the autocomplete function for email addresses entirely.
    You used to be able to do this via Mail - Preferences - Composing, but I upgraded to Mavericks today, and the option to deactivate the autocomplete funtion for email addresses is no longer there.
    Does anyone know where to find it?
    Thanks in advance for your feedback,
    Tine

    Zloyprep wrote:
    Somehow Escape button started bringing me an autocomplete list in Keynote which is monstrously inconvenient.
    This is rather surprising.
    What you are describing is a feature called "word completion", provided by the Cocoa text engine, and hence used by apps which rely on it, including iWork, TextEdit, and others. When you are typing, or the insertion point is in a suitable position, pressing ⎋, or ⌥⎋, or F5 brings up the word completion list. Of course, it only works if there are suitable words in the list. For instance, if you type "Schad", intending to write "Schadenfreude", you can press ⎋ as much as you wish and nothing will come up. But type "Zeit" and then ⎋, and you'll get "Zeitgeist" sure enough.
    What is surprising is that you describe it as if you had just came across it, whereas it has been available for years (although I believe that originally it was activated only by ⌥⎋). iWork (including Keynote) is a little different, because, in addition to ⎋, ⌥⎋, and F5, word completion is also activated by ⌘⎋.
    I don't know how to turn off this feature, if indeed it can be turned off.
    Usually Escape would make me exit the text box
    Is there any chance you mis-remember? The Keynote shortcut for exiting text editing and selecting the text box is ⌘↩ (command-return).

  • HT201150 How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?

    How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
    With the position of the power button on the Retina MacBooks, any mistake turns off the screen in the middle of a presentation or any activity using a projector or big screen — a huge waste of time to wake up the display, enter password, have the projector sync back, watch audience disconnecting from what was being discussed, etc.
    This is very annoying, and seems to add to the increasing collection of options Apple decided to make by itself instead of allowing the user to choose.
    Come on Apple guys, I'm using my Mac because I want options and lots of preferences to tweak to my needs.
    If I needed the lobotomized version I'd be using my iPad!
    Any way (official or hack) to change this button back to its proper funcionality?
    Thanks!

    cterra wrote:
    How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
    Not what you want, but you can get the shut down / restart / sleep dialog by holding the power button

  • How can I turn off the FileVault?

    How can I turn off the FileVault? It keeps saying 'Encryption paused', even I connected the power adapter.
    What impacts does it have on my Macbook Pro if I cannot turn off the FileVault?
    Thank you!

    If you don't already have a current backup of all data, back up before proceeding. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
    In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
    Then, from the menu bar, select
              File ▹ Turn Off Encryption
    Enter the password again.
    You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
    If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
              Mac OS Extended (Journaled)
    from the Format menu.
    You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
    Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe.

  • How can I turn off "reply" button when the messages come? I prefer the "open" button.

    How can I turn off "reply" button when the messages come? I prefer the "open" button. Because my friends usually send lots of messages at the same time so I cannot read all of them when I press "reply", then I have to go to Messages -> my friends' messages, and it's really complicated.

    Sorry for not quite understanding. I guess you are referring to a notice in an alert. I do not have that alert active on my device, so I cannot say. I use the banner alert, so I just get a notice of a message and can swipe to open that particular message. If I ignore it, it will eventually go away.

  • How can I turn off organizer update?

    How can I turn off elements organizer update?

    In your Adobe Application Manager you have something like this:
    Remove the tick marks (I believe you guys call it check marks) against the product for which you don't need updates.  See the red boxed item.  Also make sure the right side has the two ticks as shown because that is always required.
    G/L

  • HT204389 How do u turn off Siri from text message

    How do u turn off Siri on text message

    you can only completely disable Siri.  You can not selectively delete it for certain things.

  • How can I turn off the WLS 6.1 security in order to develop my own application-based security module?

    Dear Colleagues,
    I am currently developing a J2EE application using WLS 6.1.
    My team and I have to implement a security requirement to suit our company's needs.
    The security requirements are that, users' password need to be aged (30 days maximum) and we need to provided a GUI front-end (JSP) to allow users to change their password when these expire after 30 days.
    Our internal contacts in the company, have already taken the lead to find out about whether we will be able to use the WLS 6.1 platform to do this and the answer we got back, was.
    Now we need to develop our own security module.
    I have 2 questions:
    1. How can we turn off the WLS security in order develop our own application-based security module?
    2. How can we develop a security module that allows us to age users' password and provide them with facilities to change their passwords when these expire?
    At the moment, we are using the default BEA WebLogic login.jsp page and there some configuration in the web.xml for this. I will be grateful if you could advise me on how to turn this default security off so that we can write our own security module.

    hi,
    1.You can write your own realm in 61 which can plugged for your security
    calls.
    2. once you write your ownrealm.. you can access it through weblogic
    api/ur api..
    thanks
    kiran
    "Richard Koudry" <[email protected]> wrote in message
    news:3dd0d081$[email protected]..
    Dear Colleagues,
    I am currently developing a J2EE application using WLS 6.1.
    My team and I have to implement a security requirement to suit ourcompany's needs.
    >
    The security requirements are that, users' password need to be aged (30days maximum) and we need to provided a GUI front-end (JSP) to allow users
    to change their password when these expire after 30 days.
    >
    Our internal contacts in the company, have already taken the lead to findout about whether we will be able to use the WLS 6.1 platform to do this and
    the answer we got back, was.
    >
    Now we need to develop our own security module.
    I have 2 questions:
    1. How can we turn off the WLS security in order develop our ownapplication-based security module?
    >
    2. How can we develop a security module that allows us to age users'password and provide them with facilities to change their passwords when
    these expire?
    >
    At the moment, we are using the default BEA WebLogic login.jsp page andthere some configuration in the web.xml for this. I will be grateful if you
    could advise me on how to turn this default security off so that we can
    write our own security module.

  • How can I turn off my battery percentage warning?

    HI, how can I turn off the battery warning on my 4s phone? It freezes up my aps if I am using them when it comes on of when any pop up warning comes on like wifi network indicators. I can turn those off but not the battery thing.

    You can let Apple know here http://www.apple.com/feedback/

  • How can I Turn off my AppleTV

    How can I turn off my Apple TV?

    There is no power switch. You cannot turn off your Apple TV. You can only put it in standby (sleep) mode. To power the unit off your only option is to pull the plug.

Maybe you are looking for

  • Having trouble connect consistantly with websites, clear history then it works and an hour later, need to do the same thing (clear history to connect)

    Just purchased new laptop with Windows 8, loaded firefox for browser as have always used in other computers. Am having trouble accessing websites, for example when I go to my gmail gmail.com, an error comes up that it can't access the website, check

  • Pre-ordered Book disappears

    Several days ago, I pre-ordered the mystery This Body of Death by Elizabeth George at the price of $14.99. Yesterday, after seeing a hard copy edition in a local bookstore, I launched iBook to check on the status of my order. The book is not listed a

  • Project system tables for getting baseline and forecast values

    Hi all, I am new to Project systems and currently i am having the PS report. I need to pick the following values based on project definition (proj-pspid): --> historical baseline values like: 1) versions 2) created by 3) created on --> historical for

  • VCalender / iCalender or  vCal / iCal

    hi all, i want to send a mail form my Java/JSP application in such a format so that when the recepient receives the mail in Microsoft Outlook, he gets a popup window. then after 'Save and Close' option, the details of the mail should get updated in t

  • Environment createConnection()

    Hi, I am having trouble compiling my application. Once I have declared an Environment, env, when I look to invoke the createConnection() method, my program crashes with the following... An unhandled exception of type 'System.Runtime.InteropServices.S