How can I turn off the ability to turn off the phone from the lock screen for more security?

How can I turn off the ability, to turn off the phone, from the lock screen for more security?

There is no such option.
There will be some additional features included with iOS 7.
http://www.tuaw.com/2013/06/10/ios-7-to-include-security-feature-dubbed-activati on-lock/

Similar Messages

  • How can I find out the server port for a secured FTP site and creating a FTP Connection Manager

    I have to create a FTP Task to go out and get the files that our 3rd party vendor will be dropping on a secured FTP site. I have all the credentials to access that Secured FTP Site and have successfully done so through FileZilla.
    Now I need to set-up a FTP Task to go out and get their files and in so doing create a FTP Connection Manager. Is there any way I can determine the
    Server Port number from the Secured FTP site? I let it default to 21 and tried the Test Connect and it failed.
    Thanks for your review and am hopeful for a reply.

    Hi ITBobbyP,
    SSIS has a built in FTP task, while this only works for the FTP protocol, it doesn’t support SFTP. But there are some free clients like WinSCP and
    SSIS SFTP Task Control Flow Component
    available in the CodePlex which can invoked from SSIS.
    References:
    SSIS SFTP Task Control Flow Component approach
    WinSCP approach
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • After the iOS 7 update my iPhone 5's touch screen is unresponsive some times ,can't even open the lock screen , I had to turn the phone off and turn it on again , it's really frustrating , any solution ??

    After the iOS 7 update my iPhone 5's touch screen is unresponsive some times ,can't even open the lock screen , I had to turn the phone off and turn it on again ,any solutions ?

    Hello kumarsenthil210317
    Check out the article below to start troubleshooting issues with touchscreen response.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Regards,
    -Norm G.

  • My IPhone shut off by itself and I can't turn it back on. My lock screen button is broken and I tried plugging it into the wall but nothing happened. Can you guys please help me.

    My IPhone shut off by itself and I can't turn it back on. My lock screen button is broken and I tried plugging it into the wall but nothing happened. Can you guys please help me.

    IIf the battery was completely drained it might take some time before the phone will respond. Wait at least 30 minutes with the phone connected to the charger. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the phone starts up let it continue to charge until it's 100%.
    if the broken button will not let you do the reset Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • How can I list all the domains configured for Weblogic Servers?

    How can I list all the domains configured for Weblogic Servers?
    I saw a note, which says the following:
    "WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
    In my case, I just want to list all the domains, is that possible by using any scripts?
    Thanks
    AJ

    If you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
    <MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
    Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.

  • How can I return to the previous screen in safari?  the arrow is often grayed out.

    how can I return to the previous screen in safari?  the arrow is often grayed out.

    Try a 2 finger swipe left or right to change screens. If that doesn't work go to System Preferences/Trackpad/More Gestures and set it up.

  • I bought a macBook Air, all my devices were synchronized on a old PC. How can my MAC be the main basis for my devices?

    I bought a macBook Air, all my devices were synchronized on a old PC. How can my MAC be the main basis for my devices?

    Hi Sodam,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    iTunes Store: About authorization and deauthorization
    http://support.apple.com/kb/HT1420
    Cheers,
    - Judy

  • How can I back into the main screen without using the activator bottom?

    How can I back into the main screen without using the activator bottom?

    I assume you mean the HOME button. You cannot. The HOME button is the only way to exit an app.

  • Verizon iphone. how can i get to the home screen without activating it on a plan

    how can i get to the home screen without activating it on a plan

    Unless it is a 3rd party cord, there is no cord that just goes from the phone to the wall. However, you will need a cord that connects to the computer and the phone. The device is in recovery mode and you will need to restore it. See this support document for the instructions. http://support.apple.com/kb/HT1808

  • How can i filter at the app store for an itouch 1st gen v 3.1.3 ?

    how can i filter at the app store for an itouch 1st gen v 3.1.3 ?

    vitofromoak park wrote:
    how can i filter at the app store for an itouch 1st gen v 3.1.3 ?
    Sorry, but I don't believe there is way that you can.  You'll just have to make sure to read the minmium requirements of any App you are about to purchase to ensure that it is compatible and will run on your iPod Touch running iOS v3.1.3.
    B-rock

  • My iPod froze fully charged on the lock screen for 5 minutes, then went off and will not switch back on?

    My iPod froze fully charged on the lock screen for 5 minutes, then went off and will not switch back on?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT5824 i can not trun off my phone because my lock button does not work

    i can no trun off my phone because my lock button does not work

    Welcome to the Apple Community Shakoya.
    Go to settings > general > accessibility > assistive touch > on. This will place a faint icon on the screen, this is then available from any screen and you can turn the phone off by tapping it, tapping device and then tapping lock screen.
    This should suffice until you can have your phone fixed.

  • When I boot up the iphone 5s after it being off it will load then as soon as it gets to the lock screen it goes to sleep right away it will show me the lock screen for a second if that

    When I turn on the iphone 5s after it being off it will load then show me the lock screen for a second if that and then go right to sleep mode right away as soon as the lock screen comes on

    Hi Apple user 789,
    Welcome to the Support Communities!
    The following article will provide some troubleshooting steps for your iPhone.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If that does not resolve the issue, refer to page 146 in the iPhone User Guide to Reset All Settings:
    iPhone User Guide for iOS 7
    manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    The final troubleshooting step would be to restore your device:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition. Before restoring:
    Verify that you are using the latest version of iTunes.
    Back up your device.
    Transfer and sync content to your computer.
    I hope this information helps ....
    Happy Holidays!
    - Judy

  • Can i re calibrate the touch screen for my iPod 4th gen without use of the touchscreen?

    can i re calibrate the touch screen for my iPod 4th gen without use of the touchscreen? via CPU or other devices?

    There is no way to calibrate the touchscreen.
    Just what problem are you trying to solve?

  • Why the 'decline' option not present in the lock screen for an incoming call in ios7?

    Why is there no call decline option on the lock screen for an incoming call in IOS7??

    Yeah... One workaround is double-click the lock button. But still it's stupid. The "Decline" is available only when screen in 'unlocked'. They think, you only need the to decline only when you are busy doing something on the iPhone, else need not to decline the call i.e. when your screen is locked.
    WTH, is my phone the only thing in the world, I could be busy with to decline??

Maybe you are looking for

  • OIM 11.1.1.5.0 - Remote Manager not working

    Hi everyone, I am working with an AD which I installed on a different machine than my OIM and I would like to install Remote Manager with my AD. I followed all the steps which are described in the documentation but when I launch RemoteManager.bat, I

  • Need to ommit the short form letter from the given string

    HI,      I need to ommit the Short form letter from column data. EX : CREATE table #testdata (id int identity(1,1),cust_address varchar(max)) insert into #testdata (cust_address) select 'first street 5N, North' union select 'second street W, west' un

  • MBAM Policy Template on DC servers

    Hello, I have a question about install MBAM Policy Template on DC servers. when i install policy template on DC primary server, policy can not replicate on other DC-s. i read about this in technet. i found the solution which is add MBAM .admx and .ad

  • Keynote 3 and fullscreen QT on a PC

    Hi guys and gals, I am new to this forum but would love to know what i need to do with this: I have just bought 1Works 06 and need to get a presentation on a PC from Keynote to include all the swish stuff like ransitions and builds. I can export to Q

  • Java.lang.ClassCastException in WD Components

    Hi evebody, I facing with a very stranger situation in my WD Component. I have two components, A and B. The component B uses some methods of the Component A, but when I invoke these methods I getting the following exception:    java.lang.ClassCastExc