How can I turn off the Typekit font check when opening files in InDesign

Adobe InDesign CC, Version 9.2.1 x32
Windows 7 Professional 64 bit
Every time I open an existing file in InDesign which is using a font I have installed on my PC I get the following message:
"No matches were found on TypeKit, click "Find Font" to replace with fonts that exist on your computer"
I'm able to click on Find Font and then select the font that TypeKit is unable to find - can I stop it checking for this as I have the font installed on my local machine?
Many thanks.

Hi Adrian,
I'm sorry that you ran into trouble with this. Some users have reported an issue in the current version of InDesign which can temporarily deactivate installed fonts. Please note that this is actually unrelated to Typekit; it just happens to occur at the time you see our logo in the missing fonts window.
The InDesign team is still investigating the factors which trigger this situation, but the basic issue is this: the Missing Fonts dialog causes fonts which are managed through Extensis Suitcase and FontExplorer to not auto-activate correctly, or for managed fonts to even be visible in the application after upgrade.
In both cases, the InDesign Missing Fonts dialog appears to override the Font Management tool dialogs that allow users to manage fonts within the Application.
If you use Suitcase Fusion, there is a simple configuration change needed:
1. close the Missing Fonts window
3. go to the Type menu and select "Suitcase Fusion 5".
3. From the submenu, choose "Library" and then check "All Libraries" so all fonts can be auto-activated as needed
4. from the Type menu, select "Suitcase Fusion 5" again, and then "Check Document’s Fonts" to activate the missing fonts,
If the font is being managed by Suitcase, it will find and update the fonts.
In FontExplorer, if your managed fonts are not visible in InDesign after upgrading to InDesign 9.2
Go to FontExplorer/Tools and select
1. Clean System Font Caches (this will require a system reboot)
2. Clean Application Font Caches
On non-Mavericks systems, you will need to de-activate and then reactivate font protection. Launch a terminal window and enter
sudo atsutil fontprotection -off
Then enter
sudo atsutil fontprotection -on
Relaunch InDesign. your managed fonts should now be visible and auto-activation should work.
The fonts can always be activated from within the Font Management software itself, even with the missing fonts dialog open.
The InDesign team is looking into the issue to determine the root cause as well; our apologies for any inconvenience it causes in the meantime.
Cheers,
Benjamin

Similar Messages

How can I turn-off the apps which I have opened once in ISO 7.0.2. In previous version of ISO it was easy to turn- the opened apps by double clicking on home button and then click and hold on respective apps then click on cross sign.

How can I turn-off the apps which I have opened once in ISO 7.0.2. In previous version of ISO it was easy to turn-off the opened apps by double clicking on home button and then click and hold on respective apps then click on cross sign but in this version I could not do so and my iPad appears slower.

Close inactive apps
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen

How can I turn off the information that prints when a photo is emailed to printer?

I need to stop the printer from printing the first page when sending an email to the printer's email address.

There currently isn't an option to turn off the printing of the email.
I am an HP employee

How can I always have "enable all documents" selected when opening files in Indesign CS6?

Every time I open a file in CS6, I still have to select "open all documents" to see my files that have already been converted to CS6. Before, once a file was converted to the newer version of indesign, you would see it in the menu automatically when open "readable documents" was selected. Now when I go to find a file that I've already converted to CS6, it still makes me select "open all documents" because it doesn't show up as a "readable document"
hope this makes sense.
i'm running osx 10.6.8, mac pro

if it has a .indd, .indt, .inx or .idml extension ist should show up as readable, regardless of the version. If it's not you have a bigger problem.
Start by trashing your prefs. See Replace Your Preferences

How can I turn off the delivery of mail when I turn on the program. I want it wait until I click the get mail button before it brings the mail over

I do not want the program to bring over my mail until I click the get mail button. I look at my mail on my providers site and delete the item I do not want to look at before going to Thunderbird to actually read it. And I do not want to receive any mail that might come to me until I can determine if I want to read it first.

Disable 'Check for new messages at startup' in your Account Settings.

How can I turn off the WLS 6.1 security in order to develop my own application-based security module?

Dear Colleagues,
I am currently developing a J2EE application using WLS 6.1.
My team and I have to implement a security requirement to suit our company's needs.
The security requirements are that, users' password need to be aged (30 days maximum) and we need to provided a GUI front-end (JSP) to allow users to change their password when these expire after 30 days.
Our internal contacts in the company, have already taken the lead to find out about whether we will be able to use the WLS 6.1 platform to do this and the answer we got back, was.
Now we need to develop our own security module.
I have 2 questions:
1. How can we turn off the WLS security in order develop our own application-based security module?
2. How can we develop a security module that allows us to age users' password and provide them with facilities to change their passwords when these expire?
At the moment, we are using the default BEA WebLogic login.jsp page and there some configuration in the web.xml for this. I will be grateful if you could advise me on how to turn this default security off so that we can write our own security module.

hi,
1.You can write your own realm in 61 which can plugged for your security
calls.
2. once you write your ownrealm.. you can access it through weblogic
api/ur api..
thanks
kiran
"Richard Koudry" <[email protected]> wrote in message
news:3dd0d081$[email protected]..
Dear Colleagues,
I am currently developing a J2EE application using WLS 6.1.
My team and I have to implement a security requirement to suit ourcompany's needs.
>
The security requirements are that, users' password need to be aged (30days maximum) and we need to provided a GUI front-end (JSP) to allow users
to change their password when these expire after 30 days.
>
Our internal contacts in the company, have already taken the lead to findout about whether we will be able to use the WLS 6.1 platform to do this and
the answer we got back, was.
>
Now we need to develop our own security module.
I have 2 questions:
1. How can we turn off the WLS security in order develop our ownapplication-based security module?
>
2. How can we develop a security module that allows us to age users'password and provide them with facilities to change their passwords when
these expire?
>
At the moment, we are using the default BEA WebLogic login.jsp page andthere some configuration in the web.xml for this. I will be grateful if you
could advise me on how to turn this default security off so that we can
write our own security module.

How can I turn off the yellow pop-up tool tips?

Howdy,
I have searched high and low in the preferences and found nothing that does the trick. How can I turn off the yellow pop-up tool tips?
See attached screen shot. They are incredibly annoying. It's probably obvious, but I cannot find it anywhere on internets or this forum.
Thanks!

Thanks Nancy. Unfortunately that doesn't do it. I turned those off awhile back. Nor can I find anything under VIEW that seems to make a difference. Just FYI: I'm on a Mac OS w/Dreamweaver CS6 - but this has happened on previous versions of DW. Thanks again.

How can I turn off the sound from the original midi or audio tracks when I turned on the duplicate tracks for editing ?

How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

Dan,
It sounds like one of your preferences has changed.
Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
Hope that helps

I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset?

I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset/earphones?

Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.

How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?

How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?

An alternate method is Accessibility Settings when connected to iTunes. You should be able to turn it off there. I would also check out some of the answers listed to the right of this post and see if they can help.

How can I turn off the wireless modem on my HPG5200uk Desktop?

How can I turn off the wireless modem on my HPG5200uk Desktop? I have an ethernet connection, and don't want to be blasted by unnecessary radio waves.
This question was solved.
View Solution.

Hi,
You may not have a wireless network adapter.
If it is not in Network Adapters and you have no Device Manager errors or disabled devices under Network Adapters then that would be the case.
Jaco
Errare humanum est.

How can I turn off the 2 blue lines running vertically in my image in Photoshop?

How can I turn off the 2 blue lines running vertically through my image in Photoshop? I want to save my work but do not know if these lines will persist in the saved image.

normfb wrote:
I assume the Rulers are showing. In that case, to get rid of each line use the Move tool to straddle the line and drag it whence it came. I really didn't need to add this comment but it is the first time in years I have had a chance to use the word "whence".
Is this a guide I see before me? Doeth it conspire to confuseth mine eyes with sapphire lines that afoul my worthy parchment, and draw my quill from its righteous path? Be gone foul guide from whence thou cometh. Verily, forsooth, and hey nonny nonny.

HT1657 How can I turn off the scrolling movie ads in itunes store?

How can I turn off the scrolling movie ads across the top of the screen when I open the itunes store and am in the movies section?

Thanks varjak paw.
I was afraid this was the case. To the degree that Apple marches down this well-travelled road towards making money by trying to pound customers into submission with flashing ads, etc. that actually serve only to aggravate and drive away at least people like me (28 year user of macs) from both Apple and whatever is being advertised, and indeed get in the way of my being able to efficiently do what is my part of what I always thought was the core of the synergism between Apple and its customers -- them innovating to provide the best tools to help us to be creative and productive, then the company will find itself sharing that space with myriad other companies so bankrupt for ideas and innovation that they have no other possible strategy that to promote mindless consumerism. That does not seem a place of strength for Apple and a complete forfeiting of its unique position. Sad to watch.

Satellite A660 How can i turn off the lighting of the power button?

Hello, I recently bought a new Toshiba A660-1FL.
However bothers me is the lighting of the multimedia keys, if I work in the dark.
In Bios I could turn off the led illumination, but the power on/off button is still lighting,that distracts me when i am working.
This notebook has two power LED, so the power on lighting is in my opinion, unnecessary.
My question is: How can i turn off the lighting of the power button?

Here you can see the LED with the same function in front of you: http://s3.imgimg.de/uploads/t009aae62jpg.jpg
Yes in fact, the difference is color, design, but also location and brightness of the LED.
For me, this LED is too bright and it is distracting in the dark, as you can see here: http://s3.imgimg.de/uploads/leddf570760jpg.jpg
I was today at a local electronics store, and saw that Toshiba has the brightest Power LED on A660, but why it must be placed under the LCD and not in the front as in my old notebook Toshiba A210.
I also had the idea with a tape, but it would look ugly, and it must be removable without residue.
P.S. Also the fingerprints on the glossy keyboard do not look nice.

Remove age from birthday notification: I don't know the years most of my contacts were born, so I keep getting a default year 2000 birthdate. How can I turn off the age (xxth birthday) in Birthday Calendar - it really is very annoying!

I don't know the years most of my contacts were born, so I keep getting a default year 2000 birthdate.
How can I turn off the age (xxth birthday) in Birthday Calendar - it really is very annoying!?
Thanks
Tim

Where do you see the default birthday showing as Nov. 30? If you can explain that, I can probably modify the below script to do that clean up.
In response to the original problem:
I'm not sure why I missed the original reply, but here is an Applescript that will change all the years of any selected contacts to 1604 (default for no year).
tell application "Contacts"
          set thePeople to selection
          repeat with aPerson in thePeople
                    set theDate to birth date of aPerson
                    if theDate is not missing value then
                              set the year of theDate to 1604
                              set birth date of aPerson to theDate
                    end if
          end repeat
end tell
copy and paste it into a new Applescript Editor document. Select all the contacts you want to change (in Contacts), then run this script by clicking on the green Run button in Applescript Editor.

How can I turn off the Typekit font check when opening files in InDesign

Similar Messages

Maybe you are looking for