How can I unathorize the computers so I can authorize a new one??

I had to format my HD and now I can´t use my buys from iTune store "new" computer.. can anyone help?
Thanks!!

Hi Wiwio
I did the same thing on my MacBook Pro so it may not work the same way on your computer but give this a try.
When in iTunes go to the Store menu and "Deauthorize Computer.." Once this process has finished "Authorize Computer.." from the Store menu, this will ensure that you still have the correct number of authorizations available.
Hope this helps
J.C

Similar Messages

  • I can't change the name or erase my Time Capsule. (new one)

    I have a brand new TC and I wish to change the name of the drive (remove the space) and erase it. I've launched the Airport Utility, gone to EDIT-DISKS....and I have no options for what I need. There's no erase button. I can't click on the drive and rename it. I am terribly baffled. I'm connecting to it via its wifi from my MBP.

    By default the disk share in the TC is named data
    You must have changed it for it to have a space in it..
    Jump down to the last screenshot for how to change just the name of the disk.. you need to uncheck the enable file sharing.
    But if that doesn't work, follow the whole process from the top.. factory reset etc.
    Do a full factory reset of the TC..
    Do it this way.
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. without releasing reset keep holding it for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    In the MBP make sure your wireless is set to ipv6 for link-local. This is important.
    Now open the airport utility again.
    The TC will list as unconfigured wifi device, and you can run through the configuration or you can manually do it..
    Just select configure other from the main menu.
    Then punch in the IP address which will show up as router in the wifi in the computer.
    After a reset it will be default anyway so just type in 10.0.1.1 No password
    Now you will get the manual setup screen and you can do the setup over again and change the disk name.
    For Mavericks I recommend you use all short names with no spaces and pure alphanumeric.
    To change the name of the disk uncheck the file sharing.. otherwise the name cannot be changed.
    Once you change the name you can re-enable the file sharing.

  • HT5100 I accidentally deauthorized all my computers for my iTunes acct.  How do I add the computer back on, plus authorize a new computer?

    I need to re-activate my existing computer + add a new one to my iTunes account.  The "store" does not give me any options to do that.  How do I re-authorize my computer from my acct or the store?

    Just re-authorize each computer you still have by selecting the option from iTunes' Store menu.
    Also, see iTunes Store- About authorization and deauthorization.

  • HT1420 I deauthorized all computers so I could authorize a new one. After I authorized this computer, all my music is not showing.

    How do I get my music on the new computer.

    Copy it from your old computer or your backup copy of your old computer.

  • HT201363 My iPhone, iPad and iPod are all associated with the same Apple ID.  How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

    My iPhone, iPad and iPod are all associated with the same Apple ID.  How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

    Very simple.  Turn off Find my iDevice, then  Tap Settings, General, Erase, Erase all content and settings.

  • I have two iphones, different telcos, i am using the same apple id for both - how can i use the 10GB icloud free memory of my new iphone 5?

    I have two iphones, different telcos, i am using the same apple id for both - how can i use the 10GB icloud free memory of my new iphone 5?

    Thank you KiltedTim!
    YES, that is the free 5GB icloud memory for each apple ID. Can I not add the free 5Gb of my second Iphone to my original apple ID (5GB also) as I want to use one Apple ID name on both 2 Iphones? Is it necessary to have a different apple ID for the second Iphone to avail the free 5GB it carries with it?

  • I have an IPod Touch and how do I upgrade the OS so I can download stuff that needs IOS 4 or 5 please?

                        I have an IPod Touch and how do I upgrade the OS so I can download stuff that needs IOS 4 or 5 please?

    Which iPod touch do you have? If you're not sure, take a look at this -> Identifying iPod models
    This Apple article outlines the versions of iOS that will work on each iPod touch.
    Notes:
    iOS 4.2 is the latest version of iOS for iPod touch (2nd generation).
    iOS 3.1.3 is the latest version of iOS for iPod touch (1st generation). If you are using an iPod touch (1st generation) with iOS 2.x or earlier, you can purchase iOS 3 from the iTunes Store. See this article for more information.

  • How can I migrate data from an old MBA to a new one without having access to the screen of the old one? The screen of the old MBA is damaged !

    How can I migrate data from an old MBA to a new one without having access to the screen of the old one? The screen of the old MBA is damaged !

    If your "older" MBA has a Thunderbolt port then it isn't that old. See Target Disk Mode about how it's used. Note that without a monitor you won't be able to tell from the screen when it has fully started, and if it succeeded in starting in TDM. If it did, then the hard drive should appear on the Desktop of your new computer. You can then access it to transfer your files. You can even use Migration Assistant or any backup utility to transfer data. Just don't try to transfer system files.

  • How many times can I attempt the passcode before I can't enter it any longer...it has been over 3 hours and it will not let me re-enter it?

    How many times can I attempt the passcode before I can't enter it any longer...it has been over 3 hours and it will not let me re-enter it?  My daughter forgot the new code she put in....

    What dowes the screen say? If it just say disable and gives not time to retry then you have to restore the iPod
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • TS3376 How do I find the menue where I can select the list of previous phones I have had and my new one ? at the moment it is still set to an old one so everytime I try to set it up it tells me it it's the wrong one - gggrrrrr help please

    How do I find the menue where I can select the list of previous phones I have had and my new one ? at the moment it is still set to an old one so everytime I try to set it up it tells me it it's the wrong one - gggrrrrr help please

    iPods (except for iPod touch) are not linked to any iTunes "account."  They are associated with your iTunes library. The account in iTunes is your Apple ID, and that is used to buy and download content from the iTunes Store.  It is not required to use an iPod.
    The 1st (and 2nd) gen shuffle can only be used with one iTunes library at a time.  When you connect it, iTunes should prompt you to start using it with your iTunes library, and warn that the shuffle's existing content will be erased.  Have iTunes erase the shuffle, and it will be associated with your iTunes library going forward.  You can then add content to your shuffle.
    The need for the previous owner's Apple ID and password should only come up if you are trying to transfer existing content from the shuffle to your iTunes library, AND the previous owner had content purchased from the iTunes Store.  Just cancel out of that step, if iTunes asks.

  • The computer that I used to sync my Ipad with crashed.  How can I copy the pictures from my Ipad to my new computer?

    The computer that I used to sync my Ipad with crashed.  How can I copy the pictures from my Ipad to my new computer?  When I try to use Picassa to import them I can only see the 'Camera Roll; folder but I have several other folders with hundreds of pictures in them

    To copy photos to your computer that were taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites then see this page - on a PC you can use the windows camera wizard
    To copy photos that were originally synced from a computer you will need a third-party app on your iPad such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.

  • I have a video that I created for my daughter's first birthday.  The hard drive on my computer crashed and I lost the video file.  The only place I have it is on my iPod Classic.  How can I transfer the video from my iPod to my new hard drive?

    I have a video that I created for my daughter's first birthday.  The hard drive on my computer crashed and I lost the video file.  The only place I have it is on my iPod Classic.  How can I transfer the video from my iPod to my new hard drive?

    You are in luck, Refer to this recent post by tt2, on recovering media using 3rd Party Software.
    He has made a comprehensive list, browse through them and decide which  suits your requirements.
    Have a nice day!

  • I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email

    I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
    I JUST NEED HELP

    I would contact Apple under your warranty.  I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod. 

  • Recently, my laptop has been taken and therefore i can not access all the music that was on my old computor, although the music is still on my Ipod, how do i retrieve the music and put it on my new laptop???

    My laptop has been taken and becuase all the music bought from itunes is loaded on to the computor, not the account, i can't access all the music I've previously bought, on my new laptop. I still have my Ipod though and the music is stil on that, how do i transfer the music to my account on my new laptop ??? , xxx

    check out this post by Zevoneer.

  • My phone was run over. It still works but the screen is smashed and I cannot unlock the phone from find my iphone. How can I unlock the phone so I can save my photos?  It was not backed up in iCloud. I

    My phone was run over. It still works enough to see some of the screen but not the number pad. I cannot unlock the phone because I activated find my iphone. How can I unlock the phone so I can save my photos? Is there a way to unlock it from find my iphone. It was not backed up in iCloud. When I plug it into my computer, the computer tells me that I have to unlock it first. Help?

    No I haven't synced my iPhone with the computer I'm currently using. The computer that I normally sync my iPhone with is being repaired.
    I read a nearly identical question to mine (in which you answered) and I found my the answer. Thanks!
    Now I have a few more questions: If I mail my broken iPhone to Asurion, will I be able to get my data off of my iPhone once Asurion has it? And what will happen to my old iPhone and the data on it if I activate my replacement iPhone? Will my broken iPhone just become de-activated and will the data be erased or lost or something? Could I still sync it (with the computer ir originally synced with) and back up the data?
    Thanks.

Maybe you are looking for

  • Creating cache tables in the database

    I was told there are 2 ways to create the cache tables/triggers/etc. in a database. 1. Modify the ld_cache.sql file shipped with ALDSP 2.5 to use our names for the cache objects and manually run the SQL against the database. 2. In the ALDSP console,

  • Reinstall SL - Lost Data & Documents

    Good afternoon, My father has a MBP with Snow Leopard 10.6.8 installed and in the past week it became slow to the point where it was hardly usable.  The only 3rd party apps were VMFusion and Microsoft Office.  He told me that he did the software upda

  • Error trying to run 'sqlldr'

    I get an error when trying to run 'sqlldr'. I'm trying to run in from a Terminal session. The error returned is -bash: /Applications/Oracle/instantclient_10_2/bin/sqlldr: cannot execute binary file do? Any ideas on what the problem may be and/or poss

  • Activating screen variant created in 4.7 Version

    Dear All, Want to know is there any way to activate the screen variant created in 4.7 version. Thank you. Regards, Venkat

  • WLS 8.1 and JMX 1.2 remote API

    I am developing a web app that uses JMX 1.2 remote API to manager remote MBean servers. Even I put the JMX 1.2 jar files to the classpath, WLS still loads the previous version (1.0) of JMX bundled in weblogic.jar file, I think. And I am not eager to