How can I unlink stereo channels?

When I film an interview I always capture an independent audio track seperate from the camera, then synch the two audio sources up in FCP, and then disable the camera audio. It almost always works fine, and gives me the security of knowing that I have a backup of the audio.
Somehow or other I have managed to get the audio on one clip muddled so that Camera Audio Left is linked to External Audio Right, and vice versa. This would not be a problem except that they are not actually perfectly synched. Doing the usual "Command L" will not unlink them as they think they are a stereo pair. By disabling the track on the timeline I have been able to work around the issue, but this seems to have created a problem for DVDSP, as the audio will not sync there.

James,
if I have a video track and say 4 audio tracks coming all together I can either have video and audio tracks linked together or if I click on that button (it turns off) get a single audio track selected and editible seperately!
That's how that button can affect tracks selection!
g

Similar Messages

How can I process stereo channels separately?

I´m working with a .wav stereo, and I want to process each channel separately.
After that, I want to mix it on a dataLine, and playback as stereo.

If you're using linear PCM encoding, then you can extract the samples themselves from the byte stream as follows:
sampleL-sampleR-sampleL-sampleR
Where each sample itself is a fixed-length, depending on the format.

How can I Import 2 channel audio from a Sony PMW300 camera?

How can I Import 2 channel audio from a Sony PMW300 camera?

Terry Woolf
Thanks for the reply.
The link to your prior thread is
Audio
I suspect that the issue of no audio for your .mp4 file goes to your conversion method MXF to .mp4.
Please excuse if I am saying what you already know. When you import your video into Premiere Elements (in your case 12 Mac), a project
preset is established, either by you manually or the project automatically. That project preset contains a description of the project settings
for audio as well as video. Unless you select one of the project presets which are described for use with 5.1 channel, your audio in video audio
imports into a stereo project. It is in the export area that you will find your opportunity to customize (if necessary) the settings for audio.
In the project, if applicable to your situation, you can duplicate an audio channel (See Fill Left or Fill Right under fx Effects/Audio Effects).
Please let me ask this to make sure of the details.
If you import your .mp4 with 2 channel audio (derived from your .mxf convert and dragged to Video Track 1/Audio Track 1) and cannot hear the sound....
a. do you see any evidence for an audio file in the Timeline Audio track 1?
b. if you do, how many wave forms do you see, one or two?
c. if you have the audio meters opened while you are playing back the Timeline content in Edit area, do you see 1 or 2 channels and is
there activity in both.
d. when you import the file into Project Assets, do you observe any conforming activity going on in progress bar in the lower right cover of the workspace...if
so, do you wait for it to go to completion before continuing on?
We could also try deleting the conformed audio in the Media Cache Files Folder to force the program to re-conform the audio. See Edit Menu/Preferences/Scratch Disks should show you the location of the Media Cache Files Folder whose contents you will be deleting.
Please review and consider, and then let me know if I targeted your question. If not, please do not hesitate to let me know, and I will rethink my reply based
on your response.
Thank you.
ATR

I have recorded mono on a sony hxrmc200e how can i play stereo when I download from imovie to fce 4??

I have recorded mono on a sony hxrmc200e how can i play stereo when I download from imovie to fce 4??

While you really can't make a mono track true stereo, you can make it play to both left and right channels. Pan the track to center (0), or you can duplicate the track and pan one copy left (-1) and the other right (1) ... or select both tracks in the Timeline (original and copy) and hit Option l (lowercase L) to make them a stereo pair.
-DH

My mom updated her iPhone to iOS7, and now she has my contacts. Does this mean that she has access to all of my photos as well? How can she 'unlink' our phones? Or, is there anyway that I can get my stuff to disappear from her phone? Thanks

My mom updated her iPhone to iOS7, and now she has my contacts. Does this mean that she has access to all of my photos as well? How can she 'unlink' our phones? Or, is there anyway that I can get my stuff to disappear from her phone? We share iTunes account so I think we are both on the same iCloud.

Welcome to the Apple Community.
If you are using the same ID as a primary iCloud login, then yes she can see your photos in photostream if you have it enabled.
You can use the same ID for iTunes so you can share all your purchases, but you need different ID's for iCloud.
Unfortunately, the mess caused by sharing the ID, will need to be sorted manually, once you both have your own ID's.

How does DIADEM import TDMS files? How gets every channel his number and groupindex? How can I determine which channel has which groupindex and number?

I store different channels in a TDMS file.
I like to have a time channel at the first position with group index 1 and number 1.
When I read the TDMS file with DIADEM the time channel (Float64) is on a differernt position, and the channels are not sorted alphabetically.
Here are my questions:
How does DIADEM import TDMS files?
How gets every channel his number and groupindex?
How can I determine which channel has which groupindex and number?
Best regards
Joerg

Hi Jörg,
i suppose that you´re programme whose create the *.tdms file is writing on false position. Try to create datas with timechannel on first indes in diadem, then save it and then open it again. you see that all is correct. So please tell me what programm in what version do you use and please attache it here.
Did you use the library for creating *.tdms files like in the link ?
http://zone.ni.com/devzone/cda/tut/p/id/6471
Here you find the gtdms_8.x.zip - when you extract it and opened the *.llb you find vi´s for all functions e.g. writing 2d array of strings to *.tdms file
when you open the subvi´s then you see how created and writing datas/structure to *.tdms files. Because *.tdms is binary you can´t see structure with open it in editor.
When you don´t have Labview you can use the 30 days test of current version 8.5 under following link
german version download link
https://lumen.ni.com/nicif/d/lveval/content.xhtml
english version download link
https://lumen.ni.com/nicif/us/lveval/content.xhtml
Hope it helps
Best Regards

How can One sender communication channel pick two file from two location

Hello
I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...

>
Soumitra Sinha wrote:
> Hello Vijay
> I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
> i have two folder folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can pick file from two location and how one receiver channel can put in two location.please help me..
Ok now I get your requirement.
you cant achieve this - how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
easy way - involve IR mapping
else
have a adapter module to define your dynamic configuration.
Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
Set the dynamic directory/file name etc for your receiver adapter.

How can I unlink emails. When I reply the original email is attached to the new one

How can I unlink emails from each other so replies don't appear together?

I'm not clear on what exactly you're asking. If you're wondering how to make Mail stop including a quoted copy of the original message in the reply, go to the Composing tab of Mail's preferences and uncheck "Quote the text of the original message" in the Responding section.
If you're asking how to stop showing your replies mixed in with the messages that you replied to, go to the Viewing tab of Mail's preferences and uncheck "Include related messages" under "View conversations."

How can one change the channel of a screen control within Mainstage?

The issue that I'm having is that some 3rd party apps (Dimension Pro in particular) seem to receive Sustain (64) messages on only Midi Channel 1
I'm using a multi zone controller, with sounds set in MainStage to respond to different channels. I've got it all working well except . . Dimension Pro won't "see" a controller message if it's sent from any channel other than channel 1.
I was even having the same problem with certain sounds in Kontakt.
So the question is . . how can one shift the channel of these messages over to channel 1?
Better question, how can I get Dimension Pro to respond to a controller on a channel other than 1, but I suspect this is not the forum for such questions!
Thanks in advance,
Mark
MacOS 10.7.3
MainStage 2.1.3
Axiom 61 (2nd gen) keyboard controller

You may be able to achieve the desired results by a different method. I have an Axiom, but I don't assign zones in it. I just send one zone to Mainstage and handle it all there. You can layer and or split a practically unlimited number of instruments and assign screen controls easily. You probably want to set up all screen controls at the concert level in layout mode. You can later override concert mapping in individaul patches if you want. For instance, you could use an expression pedal for volume(7) on one patch and for modulation(1) on another patch. You can send that control to one instument channel strip or you can choose to send to all. To do this, select a screen control in edit mode. In the screen control inspector, check the overide concert mapping box. You will then see two additional tabs-mappings and unmapped. Select the mappings tab. In the mapping list, double-click "Unmapped". You can the map the screen control to any single instrument channel strip in this list or send to all. Select one and then choose a mapping destination. If you want to map expression to one instrument and not others there's another way. Select an instrument channel strip, then selct MIDI input in the software channel strip inspector. Check the filter expression box. This instument will now not respond to expression, but the other intruments in this patch will. You can filter some other events on this page. The layer editor tab allows you full control ol splits and layering options of all your instruments in this patch. Hope this helps.

HT5621 how can i unlink an iphone from its previous users email so i can turn it on to my own email address, also i cant get in contact with the previous owner

how can i unlink an iphone from its previous users email so i can turn it on to my own email address, also i cant get in contact with the previous owner

If you are referring to Activation Lock, the password for the Apple ID signed into the device is required, there is no way around this. If you do not have the information and cannot contact the previous owner, the device is useless.

How can I guet 16 channels of my fire studio tube

how can I guet 16 channels of my fire studio tube, cause im guetting just the first one.

how can I guet 16 channels of my fire studio tube using logic pro 9?

How can I delete one channel of stereo audio?

I am using FCPX and I need to delete one of the stereo channels. All I am seeing on the screen is one waveform and one channel. How do I see both channels?
Thanks

Change it to dual mono and use expand audio components. You can adjust the channels separately or switch either off in the inspector.

How can i record 2 channels at the same time?

I want to record a mix using my decks. I would like to record the two channels from the two decks separately (so if I fluff a mix I can have another go at it).
How can I set this up? My mixer only has one channel output, so would I need a different mixer or is there a way I can rig it up with the Mac and GarageBand?
iMac24 Mac OS X (10.4.8)

sorry if i wasn't clear. Yes it does have a stereo out put but my idea is to record the left deck as one track and the right deck as another. Then if I stuff a mix up I could pay back one track and record the second again.

HOW CAN I SPLIT STEREO AUDIO TRACKS

I'm trying to modify one of the audio tracks but both of the tracks are locked. If I do something with one of the tracks it affects the other one so how can I split it? or separate it? is it stereo? is there any way I can do it? THANKS!!!!!!!

Welcome to the discussions...
opt L - separates stereo channels...
Patrick

How can I unlink contacts in iOS 7 iPad2?

I have two contacts linked on my iPad2, with iOS 7, and I want to unlink them. How can I do this?

I don't know what to tell you. I've been adding and deleting contacts all morning and every time I get add a contact I get the minus sign. You can try going to the contact and deleting you from them. Or if important enough you can try deleting the entire contact then re-adding their info. I'm sure there's a solution, I'm just not seeing it.

How can I unlink stereo channels?

Similar Messages

Maybe you are looking for