How can i unlock my diable apple ipad

I WANT TO KNOW HOW TO UNLOCK MY APPLE IPAD AFTER THE PASSCODE HAS BEEN PUT IN WRONG TO MANY TIMES

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

Similar Messages

  • My Ipad is in a locked rotation.  How can I unlock it?  carolynmunson

    My Ipad is in a locked rotation.  How can I unlock it?  carolynm.

    Is there a lock symbol at the top of the screen next to the battery indicator ? If there is, then depending on what you've got Settings > General > Use Side Switch To set to (rotation lock or mute notifications), then you can lock/unlock the rotation by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    If there isn't a lock symbol then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Ipad disabled. How can I unlock without restoring on Itunes? Need the photos

    My daughter disabled my Ipad. Now it says to connect to Itunes and does not even allow me to put in a code. I have many photos and videos saved on my Ipad I wish not to erase. Any way to unlock the ipad without having to restore it through itunes? Or some how pull photos and videos prior to restoring? Any help please. Thank you. CHRIS

    When you have important videos/photos on your iPad, you should backup frequently.
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I forgot my password for my ipad how can i unlock it

    i forgot my password for my ipad how can i unlock it

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My ipad is disabled and i haven't set it up on a laptop yet as it is new, how can i unlock it?

    I got the ipad air today and put a passcode on it but  cannot remember what it is, i haven't set it up on a laptop yet and when i connect it to my laptop it says i cannot do anything until i unlock it, how can i unlock it?

    Follow the insructions half-way down this page, under the 'If you have never synced your device with iTunes, or you do not have access to a computer' heading : http://support.apple.com/kb/HT1212

  • While charging ipad, not enough storage message appeared. Now ipad is locked and is unresponsive. How can I unlock ipad?

    while charging ipad, not enough storage message appeared. Now ipad is locked and is unresponsive. How can I unlock ipad?

    Not enough storage space. Do you backup to icloud? When you plug your ipad into charge it backs up to icloud. Your out of icloud storage. Could be the reason.
    Locked....hmm... Did you try a reboot? Hold the home and power button(same time) till the screen goes black and apple logo appears. Ignore red sliders.

  • My ipad is locked after entring wrong pasword more than 10 times and i did not back up my ipad. now my device is not able be conncted with i tunes to restore or update, i need a help how can i unlock it?

    my ipad is locked after entring wrong pasword more than 10 times and i did not back up my ipad. now my device is not able be conncted with i tunes to restore or update, i need a help how can i unlock it?

    You have to restore the iPad by syncing to the original computer that you synced to.
    This article explains the process.
    http://support.apple.com/kb/ht1212

  • I had to cancel a payment that kept coming out my bank, I had no idea what it was for as it was monthly and I never signed up to anything, now my Apple ID is disabled, how can I unlock this?

    I had to cancel a payment that kept coming out my bank, I had no idea what it was for as it was monthly and I never signed up to anything, now my Apple ID is disabled, how can I unlock this?

    If your account is disabled then you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
    You might then need to log out of your account on your iPad by tapping on your id in Settings > iTunes & App Store (Settings > Store on iOS 5 and below) and then log back in so as to 'refresh' the account on it
    If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
    For the auto-renewing subscription, there are instructions on this page for managing and stopping them : http://support.apple.com/kb/HT4098

  • How can i unlock my ipad when it show connect to itunes

    how can i unlock my ipad when it show connect to itunes

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • HT204053 I have two iPads and one apple ID. How can I FaceTime to/from each iPad? Do I need to set up a second apple id or is there a way around this?

    I have two iPads and one apple ID. How can I FaceTime to/from each iPad without creating a new apple Id. Anyone know a way around this I.e trying to FaceTime 2 IPads that have the same apple id associated with them?

    Have a look here...
    setting-up-multiple-ios-devices-for-messages-and-facetime.html

  • How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

    how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

    No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
    Look at this very informative video for the instructions.
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

  • I bought a used ipad on ebay and the icloud acct is still linked to the old owner who doesn't remember the acct information. How can I set up my apple id on the iPad.

    I bought a used ipad on ebay and the icloud acct is still linked to the old owner who doesn't remember the acct information. How can I set up my apple id on the iPad?

    You will need the previous owner's Apple ID and Password to:
    1. Turn off Find My iPhone
    2. Erase device
    3. Reactivate device

  • How can I unlock my iphone??? on the screen I only have the apple logo and  a thing that looks like if the phone is working but no advance

    how can I unlock my iphone??? on the screen I only have the apple logo and  a thing that looks like if the phone is working but no advance

    Hi,
    Try a Reset of the Phone... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 10 - 15 Seconds...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • HT2534 When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.

    When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.

    You can create an iTune and App Store account without credit card details
    1. Sign out of current Apple ID if you are sign-in to one (important)
    2. Go to App Store and select a free app
    3. Tap INSTALL APP
    4. Create New Apple ID
    5. Confirm Your Country
    6. Agree with Terms and Conditions
    7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
    8. Create and answer your secret question
    9. Select NONE for Payment Method
    10. Fill in Billing Address
    11. Submit application for new Apple ID
    12. Wait for verification email
    13. When email arrive, verify your account
    14. Start downloading your free apps

  • HT1918 i want to delete my credit card info from my apple account my 3 year old has mastered purchasing apps and he knwos my password how can i remove it from mylaptop, ipad and iphone so this doesnt happen and i can enter my credit card info manually?

    i want to delete my credit card info from my apple account my 3 year old has mastered purchasing apps and he knwos my password how can i remove it from mylaptop, ipad and iphone so this doesnt happen and i can enter my credit card info manually?

    Hi..
    May not be just the security code >  iTunes Store: My credit card's security code or zip code does not match my bank's records

Maybe you are looking for

  • View_maintenance_call

    Hello, I want to use fm view_maintenance_call to update a table. But I want to pass one of the key fields from the parameters of the selection screen of my program. Is it possible to display this field with the value from program's selection screen a

  • How I can emulate Solaris 10 sparc on a Virtual Machine?

    Hi for all. Guys, I need to emulate an environment Solaris 10 in my job. We have an application that just run in this kind of environment. But, I found some problems when I try to install Solaris 10 Sparc on Virtual Box. I think that the problem is t

  • Ironport - email becomes garbled

    Hello, we are using Ironport (virtual appliance) and one email gets changed by the email gateway. The problematic message is a HTML email that is sent from a qmail MTA system. When the email flows through the Ironport gateway the HTML content isn't d

  • Connect PCI-6602 to relay

    Hello, I am absolutely new to Labview and the PCI-6602 card. What I would like to do is to use Labview to control a relay through the PCI-6602 DAQ card. I am of course using the CB-68LP connector block to make the hardware connection. Since I want to

  • Error when acquiring asset in f-90

    Message no. AC496 Diagnosis Company code 101 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation t