How can I unlock two partitions on my HD, OS 10.5.8

After HD crash I lost 2 partitions each with the OS.
I replaced the disk - loaded 10.5.6 and updated to 10.5.8. For safety I cloned 2 partitions which were good and started to backup my data to one.
Both disks which would boot are now showing 'No Entry' when trying to start from them.
I have been fighting this problem for a couple of weeks.
Apple did have a Firmware Utility which they seemed to have removed.
I have been with Apple since 84 and I do not expect such a problem.
Computer: G5 - dual 1.8 running on 1 processor

Do they show up normally in Disk Utility?
Can you re-install 10.5.x to one, it should leave your data intact.

Similar Messages

  • I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?

    I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?
    I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?

    Ouch, well there is a problem.
    This is the stack of partitions on your old drive
    EFI (hidden)
    Lion (50GB say)
    Bootcamp (50GB say)
    Lion Recovery Partiton (hidden)
    This is the same stack on your new drive imaged from the old one.
    EFI (hidden)
    Lion (50GB say)
    Bootcamp (50GB say)
    Lion Recovery Partiton (hidden)
    Emtpy Space (100GB say)
    This is what you want
    EFI (hidden)
    Lion (100GB say)
    Bootcamp (100GB say)
    Lion Recovery Partiton (hidden)
    EFI has to be at the top of the drive and Lion Recovery has to be at the bottom of the drive.
    And you only have four partitions.
    You can't move the Lion Recovery Partition or Bootcamp partiton, however you can expand the Lion Partition into empty space below it. (but can't delete or move the Lion Recovery partition)
    Your Duplicator duplicated perfectly, too perfectly Likely would work with same sized drives/partitions.
    This is what your going to need to do.
    You need to move the Bootcamp partition to a blank external drive using WinClone and disconnect. This is so you have two backups of it. (one on your old 500GB drive)
    You will need a drive enclousre or IDE/SATA to USB adapter cable for the older 500GB drive and option key boot from it. (some enclosures can't be booted from so check first Other World Computing is good place to ask)
    Download the free Carbon Copy Cloner, grab any new files off the new 750GB internal drive to the old 500GB your booted from.
    Open Apple's Disk Utility and Erase with Zero option the entire internal 750GB drive and let it rip, this will map off as many bad sectors and improve reliability.
    Now use Carbon Copy Cloner to clone the 500GB Lion + Lion Recovery Partitions to the internal 750GB, it will "fix" things and place Lion Recovery at the bottom of the drive where it belongs, give all the extra space to OS X Lion.
    Next your going to have to follow WinClones instructions to restore your Bootcamp, likely you will have to recreate the Bootcamp partition first (in Bootcamp) to the size you want and then clone. Likely Winclone may "fix" Windows to recognize it's in a new larger partition now. I don't know you'll have to check as I haven't used it.
    When Bootcamp creates the partition it will place it near the bottom next to the Lion Recovery Partition.
    As you know you will have to re-validate Windows with Lord Redmond or it expires as you changed the hardware.

  • Trying to discard an app into TRASH and I receive a message that "app cannot be removed because it is locked."  How can I unlock an app???

    Trying to discard an app into TRASH and I receive a message that "app cannot be removed because it is locked."  How can I unlock an app???

    Something may have corrupted your User account permissions. Whatever it was that did that is likely to do it again, and will require further investigation.
    To reset your User account permissions perform the following. It may not fix the problem but it will not make it any worse:
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac.
    When the Mac OS X Utilities screen appears, select Utilities > Terminal.
    In the Terminal window type resetpassword and press Enter. A window will open behind Terminal that looks like this:
    Do not enter a new password.
    Select your startup volume at the top. From the dropdown below it, select the user account with the problem.
    At the bottom of the window, you will see Reset Home Directory Permissions and ACLs.
    Click the Reset button.
    Quit Reset Password
    Quit Terminal
    Quit OS X Utilities and restart your Mac.
    Back up your system before doing anything else because disk corruption is another possibility that has to be considered.

  • I used to be a softbank Japan Iphone 4 customer and i had cleared all the dues. Now i don't have softbank contract and i am in my country Nepal. How can i unlock and use my Iphone here in Nepalese Network ?

    I used to be a softbank Japan Iphone 4 customer and i had cleared all the dues. Now i don't have softbank contract and i am in my country Nepal. How can i unlock and use my Iphone here in Nepalese Network ?

    Hi Edward,
    You should still be able to manually manage the music on your iPhone within iTunes. Make sure that when your iPhone is plugged in, look in the Summary tab to see if “Manually manage music and videos” is enabled and you can even you turn off Automatically Sync when this iPhone is connected. Take a look at the first article below to give more information on that. As far as your other questions about calling someone, I have provided two options for you. If it is for feedback on iTunes, you can use the second link to give detailed feedback on what is going on. If you want to actually talk to someone, the last link has a list of numbers for you to call for any support or service that you may need.  
    Manage content manually on your iPhone, iPad, and iPod
    http://support.apple.com/en-us/HT201593
    Product Feedback
    http://www.apple.com/feedback/
    Contact Apple for support and service
    http://support.apple.com/en-us/HT201232
    Take it easy,
    -Norm G. 

  • I am trying to reinstall my OS X Mavericks thru OS X Utilities under command R, however Recovery HD is locked. How can I unlock it? Thank you.

    i am trying to reinstall my OS X Mavericks thru OS X Utilities under command R, however Recovery HD is locked. How can I unlock it? Thank you.

    Are you able to do this:
    Install or Reinstall Mavericks, Mountain Lion, or Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    If not then you need to do this:
    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.

  • How can i make multi partition in mac with windows 7

    Dear Sir/Madam
    Greetings,
    I have a MacBook Pro with
    Serial Number  C0XXXXXXXXXV16. I want to install windows 7 in my MacBook. I want to create two partitions for my data.
    How can I make multi partitions in my computer?
    Your early reply and consideration is highly appreciated.
    Regards
    Anisseh
    < Edited by Host >

    See the response to your second post for the same question:
    https://discussions.apple.com/thread/3563070?tstart=0

  • How can I have two itunes accounts on one computer?

    How can I have two itunes accounts on one computer?

    Not sure what you mean.
    An account is a user name and password.
    Sign into whichever account you want to use for purchasing.
    Authorize the computer for both account to listen to the content.

  • How can I combine two itunes accounts into one?

    How can I combine two itunes accounts into one?

    Items purchased from the iTunes Store are permanently associated with the account from which they were originally purchased.  Apple provides no way to change this.
    However, if you wish to put content from two accounts into a single iTunes library, you can easily do so.  Use the command File > Add File (or Folder) to Library.

  • How can I share two differents Itunes accounts in my Apple TV ? I have one and my wife has another account and we want to share both in our apple tv. How can I do this ???

    How can I share two differents Itunes accounts in my Apple TV ? I have one and my wife has another account and we want to share both in our apple tv. How can I do this ???

    I assume you have different iTunes collections on different PC's, or on different logins on the same PC?  If that's the case then just enable "Home Sharing" in each iTunes using the SAME iTunes username and password as you enabled home sharing on the Apple TV with. The account used for home sharing is NOT the same as the account used to access the iTunes store, so as long as you use the same account (pick one, doesn't matter which) then you should see both of yor iTunes libraries on the Apple TV. Note - each iTunes has ti be running in order for the Apple TV to see the library.
    Here's some details on how to do it:
    http://support.apple.com/kb/HT4363

  • How can we have two different Itunes libraries on one computer?

    How can we have two Itunes accounts on one computer?  I found info on the itunes help page but I do not know how to follow the steps given because I am not prompted with what it says I should be prompted with? Please help I don't want to delete one of our libraries

    Launch iTunes with the Shift key held down as needed, or use different Windows XP user accounts.
    (74282)

  • My Ipad is in a locked rotation.  How can I unlock it?  carolynmunson

    My Ipad is in a locked rotation.  How can I unlock it?  carolynm.

    Is there a lock symbol at the top of the screen next to the battery indicator ? If there is, then depending on what you've got Settings > General > Use Side Switch To set to (rotation lock or mute notifications), then you can lock/unlock the rotation by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    If there isn't a lock symbol then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Ipad disabled. How can I unlock without restoring on Itunes? Need the photos

    My daughter disabled my Ipad. Now it says to connect to Itunes and does not even allow me to put in a code. I have many photos and videos saved on my Ipad I wish not to erase. Any way to unlock the ipad without having to restore it through itunes? Or some how pull photos and videos prior to restoring? Any help please. Thank you. CHRIS

    When you have important videos/photos on your iPad, you should backup frequently.
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How can I use two displays with my Mac Mini?

    How can I connect two displays to my Mac Mini (newest generation with one thunderbold and one hdmi)?

    Have you tried connecting one to the HDMI output, and another to the Thunderbolt port (with the appropriate Mini DisplayPort-to-other connection adapter as needed)?

  • HT1660 How can I maintain two separate itunes accounts on one single device without erasing either set of data?

    How can I maintain two separate itunes accounts on one single device (iPhone 4) without erasing either set of data when syncing with itunes?

    Hi,
    Depends on what you trying to setup but for purchases, you can roll down at the very end of the iTunes/AppStore pages to logout of your current account and then login into a different one.  Then your purchase will be billded to this new account.  Everything will sync as you used to but in order to use the purchased content in iTunes or other devices, you will need to authorize them (you can have up to 5 devices authorized for an account).

  • HT204053 How can I sync two different email accounts?

    How can I sync two different email accounts? All of this Mobile Me and cloud stuff got me all flustered and now I have two accounts possibly 3.

    How to use multiple iPods, iPads, or iPhones with one computer

Maybe you are looking for

  • DIMP - Two materials in same Production Order

    Hello experts anyone knows if it is possible combine two materials in one production orders with DIMP component? The scenario is for print flexible packaging, in one flexo printing machine we can print 2 different product with similar structure and c

  • Portal URL iview runtime error

    Dear Experts, i'm trying to create URL iview based on document this "http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0235c19-9493-2b10-64a5-8487b23a7a41?QuickLink=index&overridelayout=true" but when i'm trying to preview there's r

  • How do i setup WTC in cluster environment using WLS6.1 sp3?

    Hello: the situation is: (1)Two solaris machines. (2)one WLS domain. (3)one admin server and four managed servers in this domain. (4)we cluster these 4 managed servers. (5)each machine contains 2 managed server. Here is the problem, when we start man

  • Photoshop CC problem trying to launch application

    I have Elements 12 installed on my Windows 7 PC. After I purchased and installed Photoshop CC, I get a sign on screen to a trial version when I try to launch Photoshop CC. What's wrong?

  • SD card reader not seeing my 2.0GB SD card

    The SD card model is the Rockfish Professional 2.0 GB, 166x. It works perfectly well in my Trust external card reader and my camera, just not in my new MacBook Pro 13. Any ideas?