How can i unregister my phone when its broken

how can i unregister my phone when its broken?

Sorry, I wasn't sure what you were asking. Here you go. Can’t receive text messages on a non-Apple phone

Similar Messages

  • How can i reboot my phone when its locked

    how can i reboot my phone when its locked

    If you have "forgotten" the passcode you will have to restore the phone from Recovery mode. See: http://support.apple.com/kb/HT1808
    The phone will be erased by this process.

  • How can i unlock my phone when its registered to some one eles?

    I brought the 5s about 2 weeks ago when to turn it on and use it but found out I carnt because the phone is still registered to the person I got it off.
    Iv tried to contact them and nothing what do I do?
    Can apple unlock this for me or do I jus scrap it?

    The previous owner has to deactivate the Activation Lock. Otherwise the phone can't be used anymore, check this article about it:
    Find My iPhone Activation Lock
    Apple can't do anything about that, sorry.

  • HT201441 how can i activate my phone when i can't remember the apple ID that was logged inside my iphone?

    how can i activate my phone when i can't remember the apple ID that was logged inside my iphone?

    To find your Apple IDs go here...
    Look up your old and forgotten Apple ID

  • HT1414 how can i open my phone when i have forgotten my password ? thank you.

    hello i have forgotten my password & now i have got a red band saying iphone is disabled , how can i open my phone now when i have connected it to any pc yet so i can't go through itunes. thank you.

    Wrong passcode results in red disabled screen

  • How can i unlock my phone when i forgot the password

    How can i unlock my phone if i forgot the password?

    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • HT4061 how can i open my phone when it is disabled

    how can i open my phone.it is disabled ,i forgot the passcode

    See this support document http://support.apple.com/kb/ht1212

  • How can I restore my iphone when Its disabled and itunes wont connect to it?

    My phone is disabled and when i pulg it in it wont come up on itunes and i dont have "find my iphone" how can i restore it??

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • How can we split the image when its added dynamically ?

    Hi Experts,
    I have an image where i'm calling a DAL in Entry tab Data section under section level properties.As you know that will execute during Entry process.In that DAL i'm Adding an image based on the user choice during entry.
    When image added that should be accomedate the spaces availale in the form.First half of the section can accomedate in the first page and secound half will go to next page.
    I have used CANSPLITIMAGE rule,but that is not get executed during entry process.
    Can someone help me How to split the image during entry process when its added dynamically ?
    Thanks,
    RAMAN C.

    Aside from what you might think of as the origin placement, Gendata rules are not run during Entry operations. As such, you are not able to do what you describe in versions before 12.2. Starting in 12.2, you still can't execute Gendata rules, however there is a newly supported feature when DAL adds a section that will look for the existence of the CanSplitImage rule and assigns an internal attribute that will allow the section to split during entry. This isn't the same as running the rule, but the net effect should be acceptable. (At some point in the future, perhaps this internal attribute will become something you can just set when adding the section on the form and you won't have to specify the CanSplitImage rule at all - for Batch or Entry. That would be great.) In the meantime, if you are not using 12.2, your only option is to break your section up into smaller section components and add them separately. That should help minimize unused space on the page when something doesn't fit.

  • How can I find my phone when it is offline

    How can I find my missing phone when it is offline and my passcode would have to be touched in?
    I have the 4S and cannot find it, I also have Icloud and Find my phone, but it is offline so the gps tracker is not working,
    Can I turn it on so I can tract it?

    If after logging into iCloud the phone appears off line, it could indicate any one of a few possibilities. It could mean the battery is dead. It could mean the device is powered off. It could mean the SIM was removed. Any of these would show what you are talking about. For Find My iPhone to work properly, the device has to be powered on, Find My iPhone has to have been activated prior to the loss/theft, and it has to have an active connection to the internet. If one of those is missing, you will not be able to track the device. You cannot turn the device on remotely.

  • HT4061 how can i reset my phone when my home button isnt working ?

    My phones home button hasnt been working for a few days. I tired installing the new software but now its stuck on a loop trying to switch on then saying connect to itunes. I've tried restoring it on itunes but that is giving me the error message (3194)
    Pease help! I'm at a loss of what to do other then going to the shop.
    I've also tried to get apple to ring me but i can't get my serial number.

    There's no software fix for a hardware problem.  Bring your phone to Apple for replacement (you'll pay $199 if outside your warranty period)

  • How can i reset/restore phone when pass code is forgotten

    My daughter put a pass code on her phone but doesnt remember what it is...

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • HT1390 it is asking me some security questions which i really dont remember answering when i first installed itunes, how can i rent a movie when its asking me questions i have no answers for?

    i dont understand how i can be asked questions i have no answers for, could someone please let me know how i can rent a movie without the questions? thanks,

    Hey scoops13
    You will need to be able to answer the question to go through with the rental. Once they have been answered you should not be asked again. The article below will explain about the security questions and what to do if you cannot remember the answers to the questions.
    Apple ID: All about Apple ID security questions
    http://support.apple.com/kb/HT5665
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • How can i activate my iphone when its erased and i cannot contact its previous owner?

    I Can't contact the previous owner of my iPhone, and my iPhone is erased. How would I activate my iphone?

    You can't, and Apple won't unlock it for you; the activation lock is an anti-theft measure. You may be able to get a refund.
    (122512)

  • HT1212 my screen is broken but phone still works but have a pass code onit how do i sync the phone when its locked and unable to unlock

    hi
    i have an iphone 5 and the screen is broken looks as if the phone is off, but the phone still works if sum1 rings me i can answer it aslong as i have earphones in,
    but i need to sync it to itunes and it would let me as i have a passcode onit is their anyway around this preblem
    cheers
    ash

    There is no way out of the problem unless you have previously synced it with a computer. If you Restore the phone on the last computer it synced to it will remove the passcode and restore the contents, but if you don't have access to that computer there is no way to recover the contents of the phone.

Maybe you are looking for

  • How to get Folder Location by just providing folder name ?

    Hi, I want to get folder location by providing its name. I created one folder on "E:\" drive and when I used following code in netbeans it giving me the current loaction of java file. File directory = new File("SVN");         boolean isDirectory = di

  • HT1758 How do I connect a 2nd (Dell) Monitor to my iMac 21in?

    Trying to (want to) have a Dell Monitor hooked up to my iMac 21in...Do not have a Thunderbolt!

  • ADFS error 111 and 364

    we have a windows azure server with active directory and adfs (icw Office 365) this has worked in the past since yesterday the services stoped working i checked and saw it wasn't pointing to itself for dns (instead a other dc) and in the eventlog the

  • Problem with NETWORK_CHANGE

    I used this code in Flash CS4 and it worked. Now using Flash Builder 4.0.1, AIR 2.0.2 on a Mac OS 10.6.4 and I get an error. NativeApplication.nativeApplication.addEventListener(Event.NETWORK_CHANGE, onNetworkChangeHandler); private function onNetwor

  • Help Trouble Importing Files into Premiere Pro CS3 !!

    Before I reinstalled my computer, I was able to import HD MOV files into Premiere Pro CS3 without a problem but now it it says file not supported! what is going on?? Am I missing a driver since I reinstalled my computer? Thanks Please Help