How can I update After Effects CS6 to work with Mavericks?

I bought CS6 in September and now I have updated to Mavericks on my Mac.  It says it won't run on Mavericks?  Is there a new download?  I don't want to move to Creative Cloud, I just want to keep my purchased version.

Adobe After Effects CC and CS6 require updates to be compatible.
Download the latest build for After Effects CC (12.1) at http://adobe.ly/AE_CC_12dot1_details
...and After Effects CS6 (11.0.3) at http://adobe.ly/AE_CS6_1103

Similar Messages

  • Can't open after effects CS6 11 in OSx Mavericks

    I need help to know how to update my after effects cs6 11 to open in Mavericks
    Thanks

    Install the update:
    http://adobe.ly/AE_CC_1201_Mavericks

  • How can I use After Effects filters on a whole sequence without getting stuck in After Effects?

    It appears that, with the options that are visible to the user, Dynamic Link only goes one-way and can't make round trips from Premiere Pro to After Effects and back again.  If I send a sequence to After Effects, that part works fine and I can do what I want and save the comp.  However, even though the comp appears as an asset in Premiere Pro, I am not allowed to do anything with it.  If I try to drag it to a new sequence, it just says no.  If I click "Create Sequence from Clip" it creates an empty sequence.
    So how can I use After Effects on whole sequences/tracks instead of just on a clip-by-clip-by-clip-by-clip-by-clip basis?  is this possible?  For instance, if I have a whole sequence where I've neutralized the white balance, I might want to apply a warming filter to the whole thing as a unit.  That would be really painful with even a few clips to keep doing that again and again, and if you want to modify it slightly you have to do it over and over.  If there is a way to do that through Dynamic Link through some hidden option, what happens with the audio?  Would I have to cut it out of the lower sequence and paste it into the higher sequence with the After Effects comp as a video track?

    I'm not an Adoby guy, hence you may ignore my reply, but Adobe Dynamic Link is obviously not just one way ticket and in most cases works just fine.
    You have already been explained by J-MS and tclark513 how to properly use it and which pitfalls may occur.
    So as to apply an effect onto a whole sequence or a group of clips you need to either nest them in PrPro or pre-compose them in AE. Then just apply an effect (or several ones) onto that composition.
    So, if you nest clips in PrPro, select your nested sequence in the timeline, right-click and choose 'Replace with After Effects Composition'. Done! Your dynamically linked AE composition is in the right place in your timeline and in your Project panel as well. If you can not treat it as an ordinary footage, there are obviously some mistakes in your workflow. 
    If you didn't nest your sequence or a group of clips in PrPro before replacing them with AE composition, you may easily do it within AE. Just select all the layers in AE composition and choose Layer -> Pre-compose... (Ctrl/Cmd+Shift+C) Done! Switch back to your Master comp and apply your desired effect(s) 
    You may loose some effects or/and transitions while travelling from PrPro to AE via Adobe Dynamic Link, whereas you don't while travelling back
    (If you start building your AE composition from scratch right in AE and then need to import it into PrPro, DO NOT export one as PrPro project out of AE, but rather choose Adobe Dynamic Link -> Import After Effects Composition... within PrPro)
    P.S. And yes, submit a feature-request so that Adobe will convert 'Transparent Video' into fully functional 'Adjustment Layer'.

  • How can I install after effects on 32 bit operating system?

    How can I install after effects on 32 bit operating system?
    I cant even find it in creative cloud.
    I want to make  a intro but it dossent allow me to even find/ istall it.
    I hope some one will help me by anwsering my question.
    Than you for time.

    If your system does not meet the minimum system requirements you have to go back to a version that does. Try the direct download links you'll find here.. CS5 comes bundled with CS4 for AE which is the last  version to run on a 32 bit system.

  • Can't update after effects and photoshop anyone know why

    can't update after effects and photoshop anyone know why

    Hi Starhead,
    Please provide us the error message you are getting.
    In Creative Cloud Desktop app click on "Learn more" option near by product name.
    This will help us in order to isolate the problem.
    Also confirm the OS you are using.
    Thanks and Regards,
    Sumit Singh

  • Can't update After Effect 13.0.0.214 to the last version (13.1)

    Hi,
    I can't update After Effect 13.0.0.214 to the last version (13.1)
    The Creative Cloud app notify AE as up to date :
    When I try Help / Updates inside AE : 
    If I look at the Help / Updates / preferences Help / Updates inside AE , I can see only these apps  :
    I can't add After Effect to this list...
    Any ideas ??
    Thanks,

    Rnmt have you removed and reinstalled the After Effects CC 2014?  Available updates are automatically applied during the installation process.  You can find more details regarding the uninstall and reinstall process at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • After Effects freezes when working with footage which is just being rendered

    After Effects freezes when working with footage which is just being rendered... this is a bug which was introduced with CS6 and I wonder if this is really so hard to fix. When you are working with footage from a 3d application which is just being rendered (in my case on a small farm via deadline) it has become impossible to work with After Effects. AE freezes for several minutes and only eventually returns to work. I suspect After Effects is reloading newly rendered frames in the background although I have disabled that in the preferences. With CS5 i can work on the frames already rendered without any problems. I filed a bug report about a year ago.
    Greetings,
    Daniel

    If you don't have Service Pack 1 for Windows, you should get it.  No guarantees, but it may help.  For the moment, I'd just wait until the 3D renders are complete before importing... there isn't much else you can do at the moment, anyway.
    There's only one application I've seen that can reliably, "works-every-time", read media files as they're recorded: Avid Newscutter...but then, it was created to do precisely that.  AE wasn't.

  • I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

    I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

    For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
    For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
    See: 
    http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html  
    Be well...

  • How can use my Wireless Location Appliance to work with RF ID's?

    How can use my Wireless Location Appliance to work with RF ID's for Asset Tagging.
    It seems Smartcard used for ID cards have a small RF ID, can I use this for Asset Tagging?
    Thanks in Advance

    There are two kinds of RFID tags: Active tags, which have a battery or other internal power source, and passive tags, which have no power source and work by reflecting the energy from an RFID scanner (basically). At the energy levels and distances used for WiFi location detection, passive tags will not return a detectable signal.
    Take a look at http://www.aeroscout.com/ for more info on WiFi RFID tagging.

  • How can I scroll messages and folders in Mail with Maverick? It's unacceptable for Apple

    How can I scroll messages and folders in Mail with Maverick? It's unacceptable for Apple to have allowed this to happen

    This problem has been discussed extensively in this thread:
    https://discussions.apple.com/thread/5481937?start=0&tstart=0

  • How can iWeb hit counter be made to work with non-Apple server?

    How can IWeb hit counter be made to work with non-Apple server?

    This tutorial describes how to add an alternative counter to an iWeb page: iW05 - Adding a Graphical StatCounter as an HTML Snippet to an iWeb Page
    OT

  • How can I remove  pages 5.0 to work with Pages 09 again?

    How can I remove  pages 5.0 to work with Pages 09 again?

    Welcome to Apple Support Communities
    When you upgraded to Pages 5.0, the Mac App Store kept Pages '09 in case you want to use it again.
    To access to Pages '09, open a Finder window, choose Applications in the sidebar and open the old Pages version. To access to it quickly, you can drag the icon to the Dock.
    I do not recommend you to remove Pages 5.0 or the Mac App Store will be always asking you to upgrade Pages. Also, Apple will add more features to Pages 5.0 in the future. See > http://support.apple.com/kb/HT6049?viewlocale=en_US&locale=en_US

  • I have an older G5 tower Power PC and the OS 10.5.8, but the firefox and safari browers are no longer supporting this computer. How can I download an older version that works with this computer?

    I have an older G5 tower Power PC and the OS 10.5.8, but the firefox and safari browers are no longer supporting this computer. How can I download an older version that works with this computer?
    Or what is the newest OS system I can load onto this computer?
    I think it is from 2006

    Hello,
    10.5.8 is the highest OSX it can run.
    TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
    http://www.floodgap.com/software/tenfourfox/
    I'd avoid vesrion 24 though, as it no longer supports plug-ins like Flash.
    SeaMonkey seems pretty fast also, with many options...
    http://www.seamonkey-project.org/
    http://www.seamonkey-project.org/releases/
    Might also look into iCab & OmniWeb versions.

  • Can't update After Effects CC - Error U44M1P7

    I've been trying for a few days to update After Effects CC and it keeps failing with code U44M1P7. Digging into the logs, it looks like the root error is:
    "ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe After Effects CC 2014/Plug-ins/Effects/mochaAE/(Mocha Support)/mocha AE CC.app/Contents/MacOS/mediaioserver.app/Contents/CodeResources"(Seq 213)"
    How can I fix this?

    U44.. update error http://forums.adobe.com/thread/1289956 may help
    -more U44.. discussion http://forums.adobe.com/thread/1275963
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

  • Just installed mac os 10.9 and now i can't use After Effects CS6 - HEL

    HELP!  I am in the middle of a project!!!
    You can't use this version of the application "Adobe After Effects CS6" with this verson of OS X.
    You have "Adobe After Effects CS6" 11.0

    Hi lulugrrrl,
    Please refer the knowledge base article: http://helpx.adobe.com/after-effects/kb/effects-launch-mac-os-109.html.
    Regards,
    Romit Sinha

Maybe you are looking for

  • Exporting animation using Save for Web and Devices problem

    The animation plays as it should when the "Play" button is pressed at the bottom of the "Save for Web and Devices" Menu , but when I Preview it the individual frames don't disappear once they've shown , so you can see them all at the end of the anima

  • Replacing Drive with a 500 gig 5400 RMP Drive

    I have a 2008 macbook pro with a 200 gig drive. I would like to replace it with a 500 gig 5400 RMP drive. Q: Does anyone have any favorites that: 1 - fit inside correctly (some models are the wrong size) 2 -DOES NOT have any of the recent drive firmw

  • 2.5 y/o macbook develops random shutdown?

    Hi, my 2.0 ghz core2duo white macbook has done the random shutdown thing 2 nights in a row, and its never happened before. no warning, no prior indication, it just instantly shuts down. I haven't heard of this developing on an older macbook. Both tim

  • Oracle OpenWorld 2011 - Presentations available for download

    There were many OPA presentations at Oracle OpenWorld San Francisco in October 2011. To make them easy to find, I've put together a set of direct links to download each of the publicly available presentations: Automate CRM Business Rules for Maximum

  • Acrobat Address Book methods in Digital Signature API

    Can anyone point me to code samples using the Acrobat Address Book methods in the Digital Signature API (AABFindCertsByName, AABGetCertTrust for example)?