How can I update ati radeon hd 5750 1024 mb on my mac os lion 10.7.5

How can I update my grafic card Ati Radeon 5750 1024 mb ? I recently updated my Aerofly 5 sim software , which now does not work because ,so I am told , the grafic card has to be updated ! Thanks for any help .

You cannot change the graphics card, and Mac OS X 10.7.5 has the latest drivers available for your system. The system requirements for Aerofly state that they only support the 5770 of the 57xx series, not the 5750, so there may be nothing you can do, though you can ask in their forums and see if anyone there can offer a workaround.
Regards.

Similar Messages

  • HT1338 how can i update OS 10.5.8 to OS 10.6 or OS Lion ?

    how can i update OS 10.5.8 to OS 10.6 or OS Lion ?
    i found the solution
    https://discussions.apple.com/message/19808317#19808317

    Phone the online Apple Store and order a Mac OS X 10.6 DVD. If you want 10.7 but not 10.8, order a download code for it as well.
    (70399)

  • How can i install ati radeon 9600 pro

    i install kernel-2.6.3 and xfree86-4.4.0, i neet install ati-drivers?
    because of i run xf86config seting can't OK!

    I believe you should get basic functionality using the "ati" driver from XFree86 - not "radeon".  I know the XFree86 driver in 4.3.99 works with a Radeon 9600, so I suppose 4.4.0 will work too.
    However, you will need to install the proper ATI drivers if you wish to obtain full performance from your card.

  • HT1444 How can I update 10.5.8 to latest software on my mac pro?

    Hi,
    I have Mac Pro within serial nuber is W87398NSX92.
    And the system infromation:
    Hardware Overview:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro3,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          4 MB
      Memory:          2 GB
      Bus Speed:          800 MHz
      Boot ROM Version:          MBP31.0070.B07
      SMC Version (system):          1.16f11
      Serial Number (system):          W87398NSX92
      Hardware UUID:          00000000-0000-1000-8000-001B63A0E0AA
      Sudden Motion Sensor:
      State:          Enabled
    Now I want to upgrade RAM to 6GB or 8GB. Right now I run the 10.5.8 I want to update to latest software.
    I need some advises for that. May someone give me some references.
    Thank you,

    You can upgrade to Snow Leopard, Lion or Mountain Lion (coming next month), but you need Snow Leopard to upgrade to Lion or Mountain Lion. Check this web to know how to add memory to your computer and the memory that it supports (probably, 3 GB).

  • How can I use airplay with Macbook Pro 9,2 Mid 2012/ Mac OSX Lion 10.7.5

    What do I need to do to play Airplay on Apple TV from my computer.  The option is not in my display setting, so, obviously, I do not have the capability.  Do i need to upgrade my software?

    You can't.
    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    iTunes- Troubleshooting AirPlay and AirPlay Mirroring
    iTunes- Using AirPlay
    Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Other solutions are the Air Parrot, StreamToMe, and AirServer.

  • HT1338 i have macbook air 13.3 1.6 ghz intel core 2 duo and 10.5.8. how can i update 10.6

    i have macbook air 13.3 1.6 ghz intel core 2 duo and 10.5.8. how can i update 10.6 pls help me

    ok but i have mac os x.
    I'll explain the numbering system for you.
    With the operating systems numbering format it works as this: for example with 10.5.8, the first number is redundant because they are all 10 since 2001. This is the X in OS X
    The second number is the upgrade version, which have cat names attached to them. 10.5 is Leopard. Each of these upgrade names must be purchased.  If you want 10.6 (Snow Leopard) you need to buy it,
    The last number is the update version, which is free, but requires the upgrade before you can install it.
    So, you currently have Mac OS X 10.5.8 and you ask how to upgrade to Mac OS X 10.6 Snow Leopard, and I have given you the link of how buy it.
    so do i must change mac os x (10.5) to snow-leopard.
    The choice is yours. You do not have to upgrade if you do not wish to.

  • HT1338 I have Mac OS X Version 10.5.8 and when i try to update it nothing comes up. How can I update it?

    I have Mac OS X Version 10.5.8 and when i try to update it nothing comes up. How can I update it?

    If you're using a PowerPC Mac, you can't.
    If you're using an Intel Mac, phone the Apple Store and order Mac OS X 10.6.
    (70137)

  • How can I update the Internet Explorer on a Powermac G3?

    It's running Mac OS 8.5.1. and I recently took this beautiful machine out of the closet and tried getting it up and running again just to mess around with. But when I try to use Internet Explorer (4.01) I get a message saying "A script error occured. Some scripts on the affected page may not work correctly. Do you want to continue running scripts on the affected page?" Can this maching handle Safari? If not, how can I update IE as the furthest it can handle?
    And on a sidenote, I want to update the software as far as possible as well as clear the hard drive of all that old unecessary junk, does anyone know what to do or how to handle that? I don't have any of the old disks to use.

    OK, thanks for the info.
    I still have this model ( not active) still laying around.
    How far do you want to go?
    I'll suggest the max upgrades you can do to this Mac.
    If you want to get the absolute most out of this Mac, these Macs had removable, upgradeable CPU ZIF cards.
    Search eBay to see if there are any of these available for the old G3.
    A company called Sonnet Technologies offered ZIF upgrades for the G3 such as G3 500 MHz ZIF cards, 1 Ghz ZIF card as well as a G4 1 Ghz ZIF card upgrade.
    If you want to ry and install OS X, on these old machines, OS X had to fit on the first 8 GBs of the main drive.
    A 6 GB drive won't leave a lot of left over room aftef installing OS X.
    I believe your Mac can take up to any internal EIDE drive size under 128 GBs in size.
    You can still by this size of drive new. You would need to create an OS X partition that is slightly under 8 GBs in size as a boot partition for OS X. The other partition/s can be what you want them to be.
    You can also improve the Macs video card.
    If you want to improve this Mac's video, again turn to eBay. Look for the Original ATI Radeon Mac Edition card.
    No ATI number. This was considered the best and fastest card for that series Mac.
    There was another card, The ATI Radeon 7200 Mac Edition card. This card while have more VRAM, was considered a slower video card. It does work, though in this model Mac.
    Another thing you can add to the PCI slots, USB 2.0 and FireWire 400 cards.
    I used cards from a company called Adaptec.
    Adaptec made combo USB 2.0/FireWire Combo PCI card or seperate PCI cards for both USB 2.0 and FW.
    Again, eBay is your friend.
    Another PCI card that would be handy. You can have faster Ethernet by installing a PCI 10/100 Ethernet card into this ole' gem.
    If you can find full retail versions of OS X 10.2 Jaguar and/or OS X 10.3 Panther, you can have OS X up and running on this Mac and have a capable Mac up and running with the Internet with some success.
    Here's a link to OS X 10.3 Panther on CD
    http://www.amazon.com/gp/offer-listing/B0000E6NK9/ref=dp_olp_new?ie=UTF8&conditi on=new
    http://store.fastmac.com/product_info.php?cPath=10_5_7&products_id=202
    Here is a link for OS X 10.2 Jaguar on CD
    http://www.amazon.com/gp/offer-listing/B00006F7S2/ref=dp_olp_used?ie=UTF8&condit ion=used
    Here's another link to the ATI video card you can upgrade to
    http://www.amazon.com/gp/offer-listing/B00005QVMC/ref=dp_olp_used?ie=UTF8&condit ion=used
    This will give you an idea of just how far upgrading this Mac you could go.
    Amazon and eBay are your friend.

  • Compatible video card upgrade for my ATI Radeon HD 5750 with 1GB of GDDR5 memory, iMac 27 " mid 2010 2.93 GHz

    My graphic card (ATI Radeon HD 5750) is completely taking a dive.   What I need to know is what I can upgrade this card with...  Can anyone give me some advice here?  If I am going to replace it, I may as well upgrade!
    Thanks for your help!! 

    How is this problem resolved...I am having the EXACT same problem???

  • I've installed bootcamp 4.0 on my iMac 27. Everything works superb, but for playing need for speed run or battlefield 3 I need catalyst driver 11.7 or higher. How can I update my graphics? Is there a possibility except waiting for a new bootcamp version?

    I've installed bootcamp 4.0 on my iMac 27. Everything works superb, but for playing need for speed run or battlefield 3 I need catalyst driver 11.7 or higher. How can I update my graphics? Is there a possibility except waiting for a new bootcamp version?

    But how do you install the drivers if Bootcamp is running interference?
    Bottom line, I'ev tried to install three different versions of updated ATI driver sover the last few momnths and on each and every occassion have ended up with the original Bootcamp driver. A number of current games are unplayable on a Mac running Bootcamp as a result.
    And if I can't run the software I want, then Bootcamp is as useless as boobs on a bull.

  • How can I update my app store account ?

    Hi, I have a new Iphone and I wanted to add some applications from apple store.
    Unfortunately, I had a message saying that I was using app store on a new device (true) and they needed to check some security thing from my visa card. Unfortunately, I had a new  card and do not have the previous one anylonger (the previous one expires in 1 year but had to be cancelled).
    Therefore I am blocked and cannot get into my account.
    How can I update my bank account and get into the apple store again ?
    Thanks
    Nadiege

    Great, it worked. i could update the account from the laptop (but not from the phone).
    Many thanks for such a swift feedback !!

  • I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

    I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
    the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

    Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

  • How can i update data in JTable at run time ?

    i am trying to build a client/server architecture for conducting quizzes & online tests.. My client will return a object to the server after the test is over, which contains details about the participant, his score and other details. i am putting the incoming object to an Vector. I'll create a new thread each time for the incoming connection and insert the object to the Vector.. Now, please tell me tat, how can i update my table automatically at run time so tat, my table is updated whenever a new object is entered into vector..
    here is my code for the table..
    public class MyTableModel extends AbstractTableModel {
        String columNames[] = { "ID", "NAME", "COLLEGE", "SCORE", "CELL" };
        /** Creates a new instance of MyTableModel */
        public MyTableModel() {
            Main.List = new Vector();
            SetDefaultData();
        public int getRowCount() {
            return Main.List == null ? 0 : Main.List.size();
        public int getColumnCount() {
            return columNames.length;
        public String getColumnName(int column) {
            return columNames[column];
        public boolean isCellEditable(int row,int col) {
            return false;
        public Object getValueAt(int rowindex, int columnindex) {
            if(rowindex < 0 || rowindex >= getRowCount())
                return "";
            Student row = (Student)Main.List.elementAt(rowindex);
            switch (columnindex)
                case 0 : return row.id;
                case 1 : return row.name;
                case 2 : return row.college;
                case 3 : return row.score;
                case 4 : return row.cell;
            return "";
        public String getTitle() {
            return "Student Table";
        private void SetDefaultData() {
            Main.List.removeAllElements();
            Main.List.addElement(new Student("CS041","Keerthivasan M","MNM",95,"9884326321"));
            Main.List.addElement(new Student("CS012","Arun M","MNM",90,"9884825780"));
            Main.List.addElement(new Student("CS019","Balaji S","MNM",79,"9841742068"));
            Main.List.addElement(new Student("CS005","Anand R","MNM",89,"9884130727"));
            Main.List.addElement(new Student("CS045","Manish J","MNM",55,"9841624625"));
            Main.List.addElement(new Student("CS013","Mangal S","MNM",5,"9841961742"));
    }

    In the future Swing related questions should be posted in the Swing forum.
    how can i update my table automatically at run time so tat, my table is
    updated whenever a new object is entered into vector..You don't update the Vector directly. You should be creating a method in your TableModel, called "addRow(...)". This method will do two things:
    a) add the Student object to the Vector
    b) invoke the fireTableRowsInserted(..) method of AbstractTableModel. This will cause the table to be repainted.

  • How can we update data in LDAP server using PL/SQL.

    Hi,
    How can we update data in LDAP server using PL/SQL program.
    Is there any sample code for refrence.
    Thanks,
    Tarun

    Hi Justin,
    Thanks for your help. You got my correct requirements.
    Tim's example returning all the attributes of current user which is admin user. Please correct me if I am wrong.
    I have the following information:
    the admin user and password,server info , port and ldap_base for admin.
    I have uid and password for regular user, I am trying find the ldap_base for regular user, which may be different from adminuser.
    Please help me.
    Thanks,
    Edited by: james. on Jan 12, 2009 5:39 PM

  • I can't update IPhoto, it says "the product distribution file could not be verified it must be damaged or signed in" I bought it on iTunes and have 8,000 photos already. how can I update and correct this??

    I can't update IPhoto, it says "the product distribution file could not be verified it must be damaged or signed in" I bought it on iTunes and have 8,000 photos already. how can I update and correct this??

    You might try resetting the App Store application and clear the cookies via this menu:
    as described in this website: Make use of the Mac App Store debug menu | MacFixIt - CNET Reviews
    OT

Maybe you are looking for

  • Digitized clips not showing up in bin???

    I'm new to fcp (4.0). When I "capture" video it suddenly "isn't" going into my browser/bin - it's going strait to scratch drive instead??? I can import the clips back to the bin, but that's a pain in the ***. I can't seem to find any browswer/bin pre

  • Using portal theme in web dynpro tables

    We are currently running EP6 (NW04).  Is there a way to make our java web dynpro table ui elements use the portal theme?  All tables appear blue unless they are checked as readonly in which case they are white.  I see there is a TableCellDesign ui el

  • Need Help With Simple ABAP Code

    Hello, I'm loading data from a DSO (ZDTBMAJ) to an Infocube (ZCBRAD06). I need help with ABAP code to some of the logic in Start Routine. DSO has 2 fields: ZOCTDLINX & ZOCBRDMAJ. 1. Need to populate ZOCPRODCD & ZOCREFNUM fields in Infocube:     Logic

  • Parser Problems (jaxp)

    I am trying to parse a document and my program freezes at the factory.newDocumentBuilder() method. I have the same jar files that I have in my build path. I am confused. Any guidance would be appreciated. Thank you. try{ System.setProperty("javax.xml

  • Images go black once web page has loaded

    I use my blackberry to look at the BBC weather pages. When the page loads the images load and can be seen but once the page has finished loading all of the images go black. Any ideas. This is the page http://news.bbc.co.uk/weather/mobile/forecast/213