How can I update Dreamweaver 8 to 8.0.2 if I don't have the .MSI file?

How can I update Dreamweaver 8 to 8.0.2 if I don't have the .MSI file? I have moved this old copy to newer computer/operating system and don't have all the original discs and things.

Donny4646 wrote:
And you can move an installed application if you move a few other files manually and without getting into the registry.
I'm very skeptical about that as I have dozens of Registry entries associated with my older DW installation.
Still trying to assist anyway. Check this thread for a reported successful resolution
https://forums.adobe.com/message/4215502
Also try this:
Download the unwrapped 8.0.2 update from Adobe: http://kb2.adobe.com/support/dreamweaver/ts/documents/kb400150/DW802_unwrapped.zip
Extract the files into a root directory. There should be only one MSI file.
Open an administrator privilaged command prompt by typing in the Start menu "Command" and right clicking the "Command Prompt" option and selecting "Run as Administrator"
Navigate to the directory you extracted the files to using the CD command
Once in the directory with the MSI file run the following command: msiexec /update patchpackage.msp
Step through the installer, and everything should be fine, open Dream Weaver and go to Help -> About to verify the patch installed.

Similar Messages

HT3939 How can I tell if my iphone 5 is 32gb? I don't have the packaging anymore. I only have the IMEI number.

How can I tell if my iphone 5 is 32gb? I don't have the packaging anymore. I only have the IMEI number.

Look at Settings=>General=>About=>Capacity
What does that show?

How can I restore my iPad Air to factory settings as I don't have internet on my laptop. After I erased everything from settings. It shows to restore n update through Apple server. Pls help me how to restore it to factory settings.

How can I restore my iPad Air to factory settings as I don't have internet on my laptop. After I erased everything from settings. It shows to restore n update through Apple server. Pls help!

Without internet connection there is no way for you restore the iPad.

TA48312 How can i update my osx software from my emac from osx 10.3 to the highest available software for an emac?

How can i update my osx software from my emac from osx 10.3 to the highest available software for an emac?
I have osx 10.3.x and i want to update to the highest possible. Please help!!!!! i cant find the download. And i dont want to lose any data!!

Depending upon the specific model you have you can upgrade to either 10.4.x or 10.5.x. Neither are available from Apple any longer, so you will need to look to eBay or Amazon for copies. Be sure to only purchase retail copies and not gray labled machine-specific copies.
If your eMac came with 10.3 originally and has a clock speed of 1 GHz or higher, then you can install Leopard, 10.5.x.
If you don't want to lose data then make backups.

HT1222 how can I update my Ipad 2 with iOs 5 or better? I have version 4.3.5

How can I update my Ipad 2 with iOS 5 or better? I have version 4.3.

iOS: How to update your iPhone, iPad, or iPod touch
read the entire article

How can I add credit to my account via PayPal? I don't have a credit card? Thanks.

How can I add credit to my account via PayPal? I don't have a credit card? Thanks.

Open iTunes. Scroll to the bottom. Click "Redeem".

Hi. How can I delete my icloud account on my iPhone? I don't have that email address I was using anymore. I tried deleting it but it is asking for the password and I don't remember it.

Hi, How can I delete my icloud account on my iphone? I don't have that email address I was using before anymore and I already tried deleting the account but it is asking for the password and I don't remember it.

Hi ale.vica,
You need to go to Manage your Apple ID, https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/, and sign in with your current Apple ID and password and do the following:
1.     Edit your current Apple ID and change it back to the ID which is displaying for your iCloud account. You do not need to verify it - this is only a temporary change
2.     Go into Settings>iCloud on your device and delete the iCloud account. Use your current password when your are prompted for a password
3.     Once the old iCloud account is deleted, go back into Manage your Apple ID and change your ID back to the current one
4.     Go back to Settings>iCloud and sign on with your current ID and password
That should take care of your issue!
Cheers,
GB

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?
Several times in the last year, I've gotten a message that Time Machine needs to completely redo my backup. Using the wireless connection, this takes almost two days. Is there a way to do the backup with ethernet and then switch back to wireless? Thanks.

May I know what is needed to make sure the MacBook is able to see Time Capsule on ethernet?
Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire gateway to the WAN port (circle of dots icon) on the Time Capsule.
If AirPort Utility cannot "see" the Time Capsule now, you will need to perform a "hard reset" by holding in the reset button for 7-8 seconds or so and then reconfigure the Time Capsule. You can use the same Time Capsule name and password, etc. as before.
Configure the Time Capsule to "Create a wireless network" and select the Bridge Mode option when it appears during the setup using AirPort Utility.
Once the Time Capsule is configured, restart the entire network again. Power down everything, start the 2Wire first and then start each other device after that one at a time about a minute apart.
Now you can connect your Mac directly to one of the LAN <-> ports on the Time Capsule for the backup using another Ethernet cable. In general, about 20-25 GB per hour will transfer.
The Time Capsule will broadcast a much faster wireless network than the 2Wire can provide, so you might want to leave the setup "as is" for awhile after the first backup is complete. If you decide to use the Time Capsule as your main wireless access point, you would want to turn the wireless off on the 2Wire since two wireless networks in close proximity can create interference problems.
Or, if you want to use the wireless on the 2Wire, you could turn off the wireless on the Time Capsule. Then backups will occur over the 2Wire wireless, or over Ethernet.
I don't really recommend the "Join a wireless network" setting on the Time Capsule for most users, but you could go back to that setup as well if you want after the first backup is complete.

How can I get rid of ios6 from an iPhone 4, I don't have shsh blobs from 5.1.1.

How can I get rid of ios6 from an iPhone 4, I don't have shsh blobs from 5.1.1.

Use Google and find some other unofficial copy. This is not supported by Apple (downgrading that is) and purely at your own risk. If you end up with one that has spyware, etc., it will be entirely your problem.

Using `n how can i add two empty line (two carriage return), between these two lines in the output file?

hi friends
using `n how can i add two empty line (two carriage return), between these two lines in the output file?
PS C:\> $env:COMPUTERNAME | add-content c:\file.txt
PS C:\> $Env:USERDOMAIN | add-content c:\file.txt
i tested "$env:computername`n`n`n$env:userdomain" | add-content c:\file.txt but it results in
myPCMyDomain
but i wanted the contents of the output file be like this:
MyPC
#empty line here
#empty line here
MyDomain
i tested many other forms but didn't work.
thanks

I tried it, as well. The line breaks were respected in the PowerShell console, Programmer's Notepad, and Word; they weren't in Notepad.
You are using a Unicode file. Locale is what?
If you just want notepad compatible line breaks then do this:
del file.txt ; "$env:computername`r`n`r`n`r`n$env:userdomain" | add-content file.txt ;notepad file.txt
Look in hex to see that `n is ^L or 0xA and is only one character. CrLf is 0xD 0xA - two characters.
My programmers editors and VS all understand a single ^L as a line break so does PowerShell. Only DOS/Notepad and other utilitis don't understand this..
¯\_(ツ)_/¯

How can I view my photos within my iCloud account? I don't have an icon for that, like I do for Calendar, for instance.

how can I view my photos within my iCloud account? I don't have an icon for that, like I do for Calendar, for instance.

There is no "Online Gallery" feature in iCloud.
You can use photostream instead to snyc your pictures across your devices, but not to the internet.

I can't install updates. I get a box that says I don't have the permission, to contact the system admin.

I can't install updates. I get a box that says I don't have the permission. I need to contact the system admin. I'm the sys admin!

Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Hi , my iphone was stolen how can I find it , I didn't activate ( find my iphone ) but I have the iPhone serial number ?

Hi , my iphone was stolen how can I find it , I didn't activate ( find my iphone ) but I have the iPhone serial number ?
please help me or tell me how can I restor me pictures from icloud ?

You're welcome. If you mean how does iCloud help you recover your photos, it can help in one of two ways:
First, if you have an iCloud backup of your stolen phone, you can restore a replacement phone or another iOS deivce to your iCloud backup. This would restore the photos from the backup to the device, along with your other data and settings. You restore to an iCloud backup during the initial device setup. If the device is already set up your have to erase it by going to Settings>General>Reset and tapping Erase All Content and Settings, then go back through the initial setup screens, and when given the option choose Restore from iCloud Backup.
If your photos were in your photo stream, you can either sync another iOS device with your iCloud account and turn on photo stream, or you can sync your computer with your iCloud account and turn on photo stream, as outlined here: http://www.apple.com/icloud/setup/ios.html. This would allow you to access any photos that still remain in your photo stream. (However, photos are only saved in photo stream for 30 days. Any photos older than 30 days would be lost.)

How do i move my itunes to a new laptop if i don't have the old laptop?

how do i move my itunes to a new laptop if i don't have the old laptop?

Use the backup of the data from the laptop to move everything.
Why would you dispose of the existing computer before moving all the user data to the new computer?

I own CS5 on my work laptop which was just stolen. Do I need to buy CS from scratch or can I transfer CS5 to a new computer even though I don't have the one that CS5 is on?

I own CS5 on my work laptop which was just stolen. Do I need to buy a new CS from scratch or can I transfer CS5 to a new computer even though I don't have the computer that CS5 is on? Company purchased CS5 before the whole creative cloud leasing thing started, but after discs.

You can use web chat to remove authorization from the computer that was stolen:
Serial number and activation support
You can download the software again here:
Other downloads

How can I update Dreamweaver 8 to 8.0.2 if I don't have the .MSI file?

Similar Messages

Maybe you are looking for