How can I update my ipad3 to a ios7

How can I update my ipad3 to ios7

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Similar Messages

How can i update my iphone5c plz help am frm south africa

how can i update my iphone 5c to ios7.1 am frm south africa

There are to options:
Use iTunes on your PC/Mac
or
Use your iPhone: go to settings -> general -> Softwareupdate (make sure you are logged into an wifi network and your battery is over 50%)
Good luck!

How can I update my app store account ?

Hi, I have a new Iphone and I wanted to add some applications from apple store.
Unfortunately, I had a message saying that I was using app store on a new device (true) and they needed to check some security thing from my visa card. Unfortunately, I had a new card and do not have the previous one anylonger (the previous one expires in 1 year but had to be cancelled).
Therefore I am blocked and cannot get into my account.
How can I update my bank account and get into the apple store again ?
Thanks
Nadiege

Great, it worked. i could update the account from the laptop (but not from the phone).
Many thanks for such a swift feedback !!

I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

How can i update data in JTable at run time ?

i am trying to build a client/server architecture for conducting quizzes & online tests.. My client will return a object to the server after the test is over, which contains details about the participant, his score and other details. i am putting the incoming object to an Vector. I'll create a new thread each time for the incoming connection and insert the object to the Vector.. Now, please tell me tat, how can i update my table automatically at run time so tat, my table is updated whenever a new object is entered into vector..
here is my code for the table..
public class MyTableModel extends AbstractTableModel {
    String columNames[] = { "ID", "NAME", "COLLEGE", "SCORE", "CELL" };
    /** Creates a new instance of MyTableModel */
    public MyTableModel() {
        Main.List = new Vector();
        SetDefaultData();
    public int getRowCount() {
        return Main.List == null ? 0 : Main.List.size();
    public int getColumnCount() {
        return columNames.length;
    public String getColumnName(int column) {
        return columNames[column];
    public boolean isCellEditable(int row,int col) {
        return false;
    public Object getValueAt(int rowindex, int columnindex) {
        if(rowindex < 0 || rowindex >= getRowCount())
            return "";
        Student row = (Student)Main.List.elementAt(rowindex);
        switch (columnindex)
            case 0 : return row.id;
            case 1 : return row.name;
            case 2 : return row.college;
            case 3 : return row.score;
            case 4 : return row.cell;
        return "";
    public String getTitle() {
        return "Student Table";
    private void SetDefaultData() {
        Main.List.removeAllElements();
        Main.List.addElement(new Student("CS041","Keerthivasan M","MNM",95,"9884326321"));
        Main.List.addElement(new Student("CS012","Arun M","MNM",90,"9884825780"));
        Main.List.addElement(new Student("CS019","Balaji S","MNM",79,"9841742068"));
        Main.List.addElement(new Student("CS005","Anand R","MNM",89,"9884130727"));
        Main.List.addElement(new Student("CS045","Manish J","MNM",55,"9841624625"));
        Main.List.addElement(new Student("CS013","Mangal S","MNM",5,"9841961742"));
}

In the future Swing related questions should be posted in the Swing forum.
how can i update my table automatically at run time so tat, my table is
updated whenever a new object is entered into vector..You don't update the Vector directly. You should be creating a method in your TableModel, called "addRow(...)". This method will do two things:
a) add the Student object to the Vector
b) invoke the fireTableRowsInserted(..) method of AbstractTableModel. This will cause the table to be repainted.

How can we update data in LDAP server using PL/SQL.

Hi,
How can we update data in LDAP server using PL/SQL program.
Is there any sample code for refrence.
Thanks,
Tarun

Hi Justin,
Thanks for your help. You got my correct requirements.
Tim's example returning all the attributes of current user which is admin user. Please correct me if I am wrong.
I have the following information:
the admin user and password,server info , port and ldap_base for admin.
I have uid and password for regular user, I am trying find the ldap_base for regular user, which may be different from adminuser.
Please help me.
Thanks,
Edited by: james. on Jan 12, 2009 5:39 PM

I can't update IPhoto, it says "the product distribution file could not be verified it must be damaged or signed in" I bought it on iTunes and have 8,000 photos already. how can I update and correct this??

I can't update IPhoto, it says "the product distribution file could not be verified it must be damaged or signed in" I bought it on iTunes and have 8,000 photos already. how can I update and correct this??

You might try resetting the App Store application and clear the cookies via this menu:
as described in this website: Make use of the Mac App Store debug menu | MacFixIt - CNET Reviews
OT

How can i update data in okc_k_items and csi_item_instances tables?

How can i update data in okc_k_items and csi_item_instances tables?
by EBS .
Thanks.

For csi_item_instances table, you can use the following API:
CSI_ITEM_INSTANCE_PUB.UPDATE_ITEM_INSTANCE
For okc_k_items, try using the following API:
OKC_CONTRACT_ITEM_PUB.UPDATE_CONTRACT_ITEM
Hope this helps!

How can I update my iPad 3 to iOS 6 using iTunes

How can I update my iPad 3 to iOS 6 using iTunes

Welcome to the Apple Support Communities
See "Update your device using iTunes" > http://support.apple.com/kb/HT4623?viewlocale=en_US&locale=en_US

I've moved my Aperture library to another computer, and masters are referencing an old path name. How can I update these references? Reloctating masters does not work in this case :(

I've moved my Aperture library from one computer to another using Finder.
I merged the library with one which was already on the computer.
Now, the photos I imported have reference to the old path name on my old computer.
How can I update these references as "Relocate Masters" does not work in this case?

Just one suggestion to be able to reconnect all at once:
Create a smart album containing the images with missing masters:
File -> New -> Smart Album, and add a rule: File Status is "Missing" (or File Status is "offline")
Then select the images in this album and go to the File menu:
and select: File -> Locate referenced File
If you are lucky, Aperture will reconnect all at once, if you point the first image version to its counterpart.

How Can I update my app new version to the registered devices

Well, we have developed an in-house app using the Unity3d Game Engine. I'm using a Developer Enterprise account, and have already created the proper certificates, registered the devices (7 ipads) and generated the provisioning Profile. I have already clicked in the 'build an run', and the Unity Engine builds the app, that after is opened at the Xcode. I havel already fixed the bugs, and the app is working properly at the ipads.
The problem is, I will need to Update the app, and I need to Update them without have to get them and build them at my own Mac, since they do not stay with me. I've been strugling with that for a while. I have downloaded the provisioning profile and sent by e-mail to one of the ipads, the one I'm using to test, and instaled it, but the version of my app have not been updated.
I checked on my app icloud capabilities. The page about the Update of in-house apps is not very clear(http://help.apple.com/iosdeployment-apps/mac/1.1/#app43ad802c), and I'm new in the development for IOS.
How can update my app at this Ipads? Is there any step-by-step to follow, more eplanatory that the link above?

I didn't explained it correctly, I mean without getting the ipads, not the source code. I mean, at every time I need to launch a new version of the app, how can I update it through the internet, because I have installed my app running it at the ipads with the xcode, by usb. I'm using the enterprise program, so, as far as I know, the update is not through apple store.
The ipads are in use, and I'd like to update them without have to get them to install it myself. Hope I have explained it better this time. Thank you for your help.

How can i update rows in a table based on a match from a select query

Hello
How can i update rows in a table based on a match from a select query fron two other tables with a update using sqlplus ?
Thanks Glenn
table1
attribute1 varchar2 (10)
attribute2 varchar2 (10)
processed varchar2 (10)
table2
attribute1 varchar2 (10)
table3
attribute2 varchar2 (10)
An example:
set table1.processed = "Y"
where (table1.attribute1 = table2.attribute1)
and (table1.attribute2 = table3.attribute2)

Hi,
Etbin wrote:
Hi, Frank
taking nulls into account, what if some attributes are null ;) then the query should look like
NOT TESTED !
update table1 t1
set processed = 'Y'
where exists(select null
from table2
where lnnvl(attribute1 != t1.attribute1)
and exists(select null
from table3
where lnnvl(attribute2 != t1.attribute2)
and processed != 'Y'Regards
EtbinYes, you could do that. OP specifically requested something else:
wgdoig wrote:
set table1.processed = "Y"
where (table1.attribute1 = table2.attribute1)
and (table1.attribute2 = table3.attribute2)This WHERE clause won't be TRUE if any of the 4 attribute columns are NULL. It's debatable about what should be done when those columns are NULL.
But there is no argument about what needs to be done when processed is NULL.
OP didn't specifically say that the UPDATEshould or shouldn't be done on rows where processed was already 'Y'. You (quite rightly) introduced a condition that would prevent redo from being generated and triggers from firing unnecessarily; I'm just saying that we have to be careful that the same condition doesn't keep the row from being UPDATEd when it is necessary.

How can I update software on iPhone 3g from ios 3.1.3 to ios 4?

Recently been given an iPhone 3g. I had to restore the phone to sync to my iTunes. Now a lot of apps will not download as I need at least iOS 4 but the phone is iOS 3. iTunes tells me that this is the latest software for this model when I check for updates. Is there anyway to update to iOS 4?

The iPhone in question, iPhone 3g is running software version ios 3.1.3, my current iTunes is running 10.6.3. How can I update the software on said iPhone to iOS 4 from 3.1.3 if iTunes informs me that the current software is up to date.
The iPhone has pretty much been rendered useless as I can not download majority of apps. Therefore it just works as a pretty basic phone.

How can I update my email address on iCloud

How can I update my Apple ID email in iCloud?

I'm not sure I understand your question. What is it that you are trying to change?

How can I update my iPod on a new laptop?

So, iOS 5 is finally out next week.
I would like to upgrade to it, however since my old laptop is broke I use my mums laptop for iTunes. How can I update my system without apps beinf rid of? Last time I did it, my apps remaines intact, but I don't know how I did this.
Any help?

I have shared this thread with a number of users who have reported success with these steps.
https://discussions.apple.com/thread/3305461
This was posted for an iPad but it works the same way for an iPod. Important - and this has been covered - turn off auto sync in iTunes first, transfer your purchases next, back up your iPod after that.
It is all covered in this thread - Demo & King Penguin

How can I update my ipad3 to a ios7

Similar Messages

Maybe you are looking for