How can I update my mac it hasn't been updated since 2011
My mac hasn't been updated in a while and it randomly deletes itunes. Each time I download it again its back on an old version of itunes and most of my music disappears. I'm not sure if it's because it needs to be updated. please help
Use Spotlight and check how many copies of iTunes application you have on your computer.
It's unlikely it absolutely has to be updated. iTunes is either going to work under a certain system version or it isn't. I run a copy of iTunes dating from year 2007 on a computer dating from year 2002 with system software dating from year 2005 and I don't lose music.
Similar Messages
-
HT1414 How can I unlock my IPod that hasn't been connected to itunes yet and is disabled
Myt daughter lock her Ipod before I could connect it toItunes and it is now diabled can someone help me unlock it.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
See question.
You will find that the number of audiobook titles available without DRM is much smaller than the number of titles available with it. eMusic probably has the largest collection of MP3 format audiobooks, which are not wrapped in DRM, but their catalog is a pale shadow of Audible's collection.
The source of your ire is the publishers. They are the ones who insist on DRM, rather than Apple or Audible. (Though there are also policies at those vendors, which make it difficult or impossible for authors who choose to go without DRM (such as Cory Doctorow) to offer their titles without DRM. I suspect that it’s the fault of the publication system, but who knows for sure.)
Personally, I don't care about the DRM. Audible titles play just fine on my iPhone, and that's the only place I play them, so I never notice it. Someday that might change, and then maybe I'll be angry. But that seems low probability. -
I am still running Leopard Mac OS X 10.5.8. How can I get Lion Mac OS X 10.6, so I can update to Mountain Lion?
Upgrading to Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
If you need to purchase Lion call 1-800-692-7753 or 1-800-676-2775. Ask for a Sales Representative. They will check your Apple ID, and email you a code and instructions. The cost is $29.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion. -
How can I share my mac book pro with my mac pro.
Hi,
Anyone know how can I share my mac book pro with my mac pro. At the moment I am in NewZealand and my Mac Pro is in UK. I used to share my both computer in UK in same network but I don't know how can I share with different network. Please help me.You can't, currently only the iPhone has the personal hotspot function, it hasn't been enabled on the iPad - whether it will be possible in the future I don't know
-
How can I delete my old app store account from update on my IMac
How can I delete my old app store account from update on my IMac
All items that you download from the iTunes store are tied to the account that downloaded them, so only that account can download updates to its apps.
If you are referring to apps from the Mac App Store then you will be better off asking in the Using Mac App Store forum (this is the iTunes Store forum). -
Hello,
I have a Mac Pro. Here are the specs :
Mac OS X 10.5.8
MacPro1,1
NVIDIA GeForce 7300 GT
When OS 10.6 came out, I found out that I couldn't upgrade to it because of my graphic card. In the technical specifications it is mentioned that :
OpenCL
requires one of the following graphics cards or graphics processors:
NVIDIA GeForce 9400M, GeForce 9600M GT, GeForce 8600M GT, GeForce GT 120, GeForce GT 130, GeForce GTX 285, GeForce 8800 GT, GeForce 8800 GS, Quadro FX 4800, Quadro FX5600
ATI Radeon 4850, Radeon 4870
Now, OS 10.5.8 is becoming more and more outdated. I would like to know how can I upgrade my Mac Pro ? What kind of graphic card can I put in ?
Thank you for any help and/or information !Dalfe wrote:
Hello,
I have a Mac Pro. Here are the specs :
Mac OS X 10.5.8
MacPro1,1
NVIDIA GeForce 7300 GT
When OS 10.6 came out, I found out that I couldn't upgrade to it because of my graphic card. In the technical specifications it is mentioned that :
OpenCL
requires one of the following graphics cards or graphics processors:
NVIDIA GeForce 9400M, GeForce 9600M GT, GeForce 8600M GT, GeForce GT 120, GeForce GT 130, GeForce GTX 285, GeForce 8800 GT, GeForce 8800 GS, Quadro FX 4800, Quadro FX5600
ATI Radeon 4850, Radeon 4870
Now, OS 10.5.8 is becoming more and more outdated. I would like to know how can I upgrade my Mac Pro ? What kind of graphic card can I put in ?
Thank you for any help and/or information !
It's been a while since I've used it but I installed Snow Leopard on my old Mac Pro 1,1 with the 7300GT and it worked. OpenCL may not have but the rest of it did. I don't think what you've quoted says you can't upgrade but only that an upgrade won't deliver all of the features in Snow Leopard. Indeed, I was able to move the HD in the 1,1 Mac Pro into the 5,1 Mac Pro, boot from it (10.6.4 is the minimum the 2010 Mac Pro will boot with), clone it and then updated it. -
i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me
If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
MacBook pro does not start. How can I back to Mac OS X Lion?
I have a MacBook Pro. On my MacBook i made three partition, then I installed window 8. After that I started windos and try to delete third partition by Administrator tool from windows operating system. After that my MacBook does not start. How can I back to Mac OS X Lion?
After that I again install windows 8 from a DVD. Windows start well, but I can not start Mac OS system, may be it was 10.6. Sever times I tried to install OS X Lion 10.7 thought DVD, I could not. On MacBook I have a lot of important data.
What can I do. I want to a complete suggestion. Please help me to solve the problem.
My MacBook Pro model no. A1286.You installed Windows improperly the result of which was to wipe out the bootloader for OS X. You can give this a try:
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the OS X disk icon from which you want to boot.
5. Click on the arrow button below the icon.
If you are still unable to boot from the OS X volume then you will need to reinstall OS X:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
This will destroy the Windows bootloader so you cannot boot into Windows. The solution is to remove all the partitions on the drive except the OS X partition, then expand the OS X partition to take up the entire drive.
Use Boot Camp Assistant in the Utilities folder to create a Windows partition on which you can install Windows. You cannot have any other partitions on the drive besides these two.
Now given all the above you may be able to install a third-party bootloader that would work with the setup you now have: Boot Runner 1.4. -
My computer froze during match initial formatting. Now some songs are uploaded others are "greyed out." If I go song by song, I can update match. How can I do this all at once and also update album art?
Hi gdogk,
If there was an interruption during the initial iTunes Match process and you are now having issues with playback and album art, you may find the troubleshooting steps outlined in the following article helpful. In particular, you may want to turning iTunes Match off, then back on again, as noted here:
If iTunes Match is already enabled on your computer or device, try turning iTunes Match off and then on again.
Mac: While holding down the option key, choose Store > Turn Off iTunes Match.
Turn iTunes Match on by selecting Store > Turn On iTunes Match.
Windows: While holding down the shift key, choose Store > Turn Off iTunes Match.
Turn iTunes Match on by selecting Store > Turn On iTunes Match.
How to troubleshoot iTunes Match - Apple Support
Regards,
- Brenden -
TA48312 how can i upgrade my mac os x 10.5.8 to the latest version
how can i upgrade my mac os x 10.5.8 to the latest version? i need to download i tunes desperatly!!!
You need a Mac OS X 10.6 DVD, an external optical drive such as Apple's SuperDrive, and the 10.6.8 combo updater. You don't need to buy Mac OS X 10.7 or 10.8.
(84361) -
my mac app store has disappeared from my dock and when i pull it up in finder it says it is damaged. how can i download the mac app store software?
Delete the App Store app by dragging it and dropping it into the Trash. Then download and install the appropriate update combo for your version of OS X;
Install new MAS app -
OS X Mountain Lion 10.8.3 update combo
http://support.apple.com/kb/DL1640
OS X Lion 10.7.5 update combo
http://support.apple.com/kb/DL1583
OS X Snow Leopard 10.6.8 v1.1 update combo
http://support.apple.com/kb/DL1399 -
I have a macbook pro the early 2007 version & i am new to the mac apple world. How can i download The mac app store and will i be able to use the iLife'11? I want to buy the iLife software but I am not sure if it will work on my computer.
Hi Kristy,
Update to 10.6.8 to use the app store.
Your MBP's hardware requirements should be fine for iLife 11:
http://support.apple.com/kb/HT4163 -
How can I control a mac mini connected by USB to a Benchmark DAC 2 for the purpose of listening to 24/192 music downloads?
Hello,
About the dac 1, but may apply to the dac 2 as well in some ways...
Here are more details:
1) The current version of iTunes (7.5) for OSX is very broken. Some older versions work properly, but 7.5 introduces truncation and DSP artifacts that can measure as high as –80dBFS. These levels are easily audible. There is no system configuration that will permit transparent playback from 44.1kHz sources with iTunes 7.5. Curiously, the only format that works properly in 7.5 is 24-bit/96kHz. This iTunes problem has nothing to do with USB communications, as the results are the same when using the built-in optical port on our PowerBooks. As a workaround, we suggest using the free VLC for Mac player. VLC works perfectly with all formats (provided OSX is set to match the sample rate of the files being played). We highly recommend the VLC player for OSX users, and strongly advise against using iTunes. We will attempt to identify which versions of iTunes work and which ones don't. But beware, iTunes updates itself without user intervention. One of our test computers "upgraded" itself to the dysfunctional iTunes 7.5.
2) OSX still does not have the ability to follow sample-rate changes. We consider this a nuisance for most users and a show-stopper for users who want to play a mixed list of 44.1kHz and 96kHz material. An OSX sample-rate mismatch will invoke the very-poor-quality sample-rate conversion that is built into OSX. The iTunes 7.5 bug seems to be locking on this sample-rate conversion at all sample rates other than 96kHz. Until this is fixed, OSX is not the operating system of choice for audio playback.
http://www.stereophile.com/content/benchmark-dac1-usb-da-processor-headphone-amp lifier-manufacturer-comment -
When I put a burned cd from one Mac into another Mac, song titles do not show up! I have to enter them manually! My CD player reads the titles that i on the cd; how can I get my Mac to do so?
The problem is that I burned these CD's myself from music that I added from my personal collection to iTunes. The INFO is ON the CD's (it appears perfectly when I put the CD in my Numark mixer...so I know the info is on the CD), but for some reason, my MAC PRO will NOT read the info on the burned CD when I place the CD into the MAC PRO. The CD was burned on a MAC that I no longer own. But there HAS to be a way to transfer songs from a burned CD with the INFO that is on the CD burned with iTunes.
PLEASE HELP!
-Old Appel
Maybe you are looking for
-
I can play my dvd-r recording on my tv - why won't it play on the computer
I can't play my dvd on my laptop but it plays fine on my dvd/tv - what could be the problem?
-
Timeout querying LDAP groups from BPM Workspace Administration page
I already configured my server to use Active Directory instead the Weblogic embedded LDAP to users authentication in the BPM Workspace. When I go to [Weblogic Console / Security Realms / myrealm / Users and Groups / Groups] the console shows correctl
-
How to handle the "Must set build.archive.dir"?
Hi friends, When i run my application i see the given bug: C:\Users\user\Desktop\ticketing\nbproject\build-impl.xml:91: Must set build.archive.dir i will appreciate it if anybody help me Thanks Reza_mp
-
Friends, We are in the process of rolling out IDM password self service. We configured developement and production. For some reasons we had to delete the production identity store and recreated. From the time we did that, I cannot see job logs for an
-
Is oracle project generate alert incase of any delays in Tasks Or prject
Hi Experts It's possible to generated auto alert in case of delay's in Task/Projects ? If yes please give me link.