How can i update my xperia ray into ICS?

i have tried the update with pc companion but it is showing an error "Unable to install or start phone software update components". I have also downloaded the SUS software but it is not working in my windows 8 machine. Is there any way to upgrade the OS directly from mobile? Or how can i update it in any other way?
Solved!
Go to Solution.

We don't have a PC companion version tested for Windows 8. (Microsoft® Windows XP™ SP2 (32 bit), Vista (32/64 bit) or Windows 7 (32/64 bit) Only) That's the issue in your case.
But try this:
If you are getting the error "unable to install update components"
1. Close Pc companion
2. Install Java from: http://www.java.com
3. start Pc companion again and try to do the software unlock process once more.
Then:
Run the Pc companion Software
Turn the phone off and disconnect it from the computer
1. No matter what the program says do not connect the phone until you complete step 9
2. In the welcome screen if asked click on start, Next you will be shown what media go offers, click on "next" then you will see a presentation on what support zone offers, click on "Finish"
3. In the next section from "support zone" and "media go" new select "support zone" and click on start.
4. On the next page select "Software update" and click on "start"
5. The program will say that there is no phone connected and will ask you to connect but disregard that and instead choose the option to "repair Phone".(the program will issue you a warning on the content that you will lose during the update)
6. Choose the option to continue.
7. After that, the program will download the necessary information (5 to 6 minutes) and it will present you with a list of phones.
8. Choose the Phone from the list (close to the bottom of the list) click on the icon for the phone and then click on "next"
then you will see a new section telling you how to connect the phone. (don't connect it yet)
At this point the phone must be off and disconnected from the PC.
9. Connect the cable to the PC not to the phone, then follow the instructions on screen to connect the phone, if done correctly the program will say "the update of your phone has started..." (in some cases a message of "Installing drivers" will appear before the message of "the update of your phone has started..." is shown.)
10. If you failed to follow the steps correctly the phone will turn on and it will request that you "Proceed with the following steps, slide down the notification bar", If this happens disconnect the phone from the cable, turn it off and repeat from step 9).
11. If the PC Companion proceeds correctly wait for the update to finish and follow instructions on screen.
Hope this helps.
Francis

Similar Messages

How can i update my xperia mini pro sk17i from ICS to Jellybean

Last year i was able to upgrade my phone from Gingerbread to ICS. Now that Jellybena is available how can i upgrade my phone.
Solved!
Go to Solution.

the 2011 Xperias are NOT going to get Jelly Bean, ICS was the last update.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Problems in Xperia Ray after ICS update

Hey I just updated my Xperia Ray to ICS..but after the update, the calibration of the accelerometer seems to have gone haywire...Whenever i am browsing through my gallery the screen does not change its orientation automatically (auto screen orientation is enabled)..and if in some video or photo it goes into the landscape mode, it does not revert back to the potrait mode when I change orientation of the phone...Please help...
Also, there is no face unlocking feature in the update (India)..any ideas??
Solved!
Go to Solution.

Few questions
Did you face all the points listed below - after installing for the first time-
1) EXtracting android files at startup
2) no setup guide at startup
3)Old blue wallapaper of Ginger bread
4) No screen touch sounds, even marked in sound settings
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

I have an iPhone 4s but when I plug it into iTunes it says software is 4.2.1. How can I update to IOS8?

When I plug my iPhone 4s into iTunes it says the software is 4.2.1. How can I update it to IOS8?

Thanks KiltedTim,
Its only a back-up phone but I thought it was a 4S, I could be wrong!
iTunes on syncing Mac is version: 12.1.0.50

I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?

I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?

I'd say your sister messed up and your iPod is toasted.
Think about it... She plugged it in to another computer, she doesn't remember what she did (yeah, right), and now your iPod is not being recognized by your computer...
Also take into consideration how old is your sister, and how much does she know about electronics?

How can I update my app store account ?

Hi, I have a new Iphone and I wanted to add some applications from apple store.
Unfortunately, I had a message saying that I was using app store on a new device (true) and they needed to check some security thing from my visa card. Unfortunately, I had a new card and do not have the previous one anylonger (the previous one expires in 1 year but had to be cancelled).
Therefore I am blocked and cannot get into my account.
How can I update my bank account and get into the apple store again ?
Thanks
Nadiege

Great, it worked. i could update the account from the laptop (but not from the phone).
Many thanks for such a swift feedback !!

How can i update data in JTable at run time ?

i am trying to build a client/server architecture for conducting quizzes & online tests.. My client will return a object to the server after the test is over, which contains details about the participant, his score and other details. i am putting the incoming object to an Vector. I'll create a new thread each time for the incoming connection and insert the object to the Vector.. Now, please tell me tat, how can i update my table automatically at run time so tat, my table is updated whenever a new object is entered into vector..
here is my code for the table..
public class MyTableModel extends AbstractTableModel {
    String columNames[] = { "ID", "NAME", "COLLEGE", "SCORE", "CELL" };
    /** Creates a new instance of MyTableModel */
    public MyTableModel() {
        Main.List = new Vector();
        SetDefaultData();
    public int getRowCount() {
        return Main.List == null ? 0 : Main.List.size();
    public int getColumnCount() {
        return columNames.length;
    public String getColumnName(int column) {
        return columNames[column];
    public boolean isCellEditable(int row,int col) {
        return false;
    public Object getValueAt(int rowindex, int columnindex) {
        if(rowindex < 0 || rowindex >= getRowCount())
            return "";
        Student row = (Student)Main.List.elementAt(rowindex);
        switch (columnindex)
            case 0 : return row.id;
            case 1 : return row.name;
            case 2 : return row.college;
            case 3 : return row.score;
            case 4 : return row.cell;
        return "";
    public String getTitle() {
        return "Student Table";
    private void SetDefaultData() {
        Main.List.removeAllElements();
        Main.List.addElement(new Student("CS041","Keerthivasan M","MNM",95,"9884326321"));
        Main.List.addElement(new Student("CS012","Arun M","MNM",90,"9884825780"));
        Main.List.addElement(new Student("CS019","Balaji S","MNM",79,"9841742068"));
        Main.List.addElement(new Student("CS005","Anand R","MNM",89,"9884130727"));
        Main.List.addElement(new Student("CS045","Manish J","MNM",55,"9841624625"));
        Main.List.addElement(new Student("CS013","Mangal S","MNM",5,"9841961742"));
}

In the future Swing related questions should be posted in the Swing forum.
how can i update my table automatically at run time so tat, my table is
updated whenever a new object is entered into vector..You don't update the Vector directly. You should be creating a method in your TableModel, called "addRow(...)". This method will do two things:
a) add the Student object to the Vector
b) invoke the fireTableRowsInserted(..) method of AbstractTableModel. This will cause the table to be repainted.

How can i update rows in a table based on a match from a select query

Hello
How can i update rows in a table based on a match from a select query fron two other tables with a update using sqlplus ?
Thanks Glenn
table1
attribute1 varchar2 (10)
attribute2 varchar2 (10)
processed varchar2 (10)
table2
attribute1 varchar2 (10)
table3
attribute2 varchar2 (10)
An example:
set table1.processed = "Y"
where (table1.attribute1 = table2.attribute1)
and (table1.attribute2 = table3.attribute2)

Hi,
Etbin wrote:
Hi, Frank
taking nulls into account, what if some attributes are null ;) then the query should look like
NOT TESTED !
update table1 t1
set processed = 'Y'
where exists(select null
from table2
where lnnvl(attribute1 != t1.attribute1)
and exists(select null
from table3
where lnnvl(attribute2 != t1.attribute2)
and processed != 'Y'Regards
EtbinYes, you could do that. OP specifically requested something else:
wgdoig wrote:
set table1.processed = "Y"
where (table1.attribute1 = table2.attribute1)
and (table1.attribute2 = table3.attribute2)This WHERE clause won't be TRUE if any of the 4 attribute columns are NULL. It's debatable about what should be done when those columns are NULL.
But there is no argument about what needs to be done when processed is NULL.
OP didn't specifically say that the UPDATEshould or shouldn't be done on rows where processed was already 'Y'. You (quite rightly) introduced a condition that would prevent redo from being generated and triggers from firing unnecessarily; I'm just saying that we have to be careful that the same condition doesn't keep the row from being UPDATEd when it is necessary.

How can I update my iPhone 3gs to iOS4, after iOS5 came out?

I am still running iOS 3 (1.3) on my iPhone 3GS and I'm happy with it - but all the new apps requires iOS4 and now I'm sick of this. I want iOS4 (and not iOS5, cause it will drain my battery as far as I've understood).
How can I update my iPhone 3GS in a normal way to iOS4, through iTunes or another easy way? I have never jailbreaked an iPhone so I don't know too much about "backdoors" into my iPhone.

The only Firmware in the iOS 4 series that Apple is still signing for the iPhone 3GS is 4.1. So you could restore to 4.1. You will have to download the 4.1 IPSW from Apple, and then install it with iTunes, Option Click Mac or Shift Click Windoz, on the Restore Button and then select the 4.1 IPSW on your computer. The current iTunes may give meaningless Errors, I doubt because you are Upgrading. But if Error Message is given you will have to search the Web for ways to Exit Recovery.

HT204152 I am unable to update my App store Updations. the reason being billing problem asking to update payment method.many times i updated my credit card details but refusing from the system .how can i update my app store updations like Face book etc.

I am unable to update my App store Updations. the reason being billing problem asking to update payment method.Many a times i updated my credit card details but refusing from the system .how can i update my app store updations like Face book etc....Using ! phone 6plus .IOS8.3

What do you mean by 'refusing from the system', if you are getting an error message then what does it say ?
For a credit card to have a chance of being accepted it needs to be registered to the same name and address (including format and spacing etc) that you have on your iTunes account, and have been issued by a bank in the country where you and your iTunes account are. If it is and if you are getting a 'declined' message then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes Support (these are user-to-user forums) and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If when trying to download you are getting a message about a 'problem with a previous purchase' then that implies that iTunes wasn't able to collect the money for your last purchase. If that is the case then you won't be able to download anything else (including app updates) until you've paid off what you owe : Pay an unpaid balance in the iTunes Store - Apple Support
If you aren't getting the 'problem with a previous purchase' message then try logging into your account (not when trying to download something) and see if you get the 'none' option so that you can remove the card's details and be able to download updates to your apps : Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support

How can I update my App Store payment details

How can I update my App Store payment details

On your iPad you can tap on your id in Settings > iTunes & App Store and then tap on 'View Apple ID' on the popup and log into your account - that should give you a payments link on your account's page. Or you can do it via your computer's iTunes by logging into your account by going into the Store > View Account menu option, and on your account's details page there should also be a payment link.
Changing payment info : http://support.apple.com/kb/HT1918

How can I convert my Tiger DVD into a CD without spending more money?

How can I convert my Tiger DVD into a CD without spending more money and time? I've spent over seven hours trying to upgrade an iMac 350 Hz OS 9.1 to Tiger. I have changed the iMac firmware to 4.1.9, but found that my Panther disc was only an OSX Upgrade, although the 3 cds are labeled as Installation Discs. Since I have a Tiger disc I thought I would use that. Unfortunately, my iMac only reads CDs, not DVDs. I tried networking the iMac to my G5, but upon shutdown, the OSX disc cannot be accessed. I copied the DVD files to my iMac hard drive, but again, the OSX disc cannot be accessed after shutdown.
Is there a way I can burn a CD from the files of my Tiger DVD to get this task accomplished?

Excuse me, but I never thought of that, nor did I have any intention of trying to rip off your company.
I purchased four iPods for my family this Christmas. I have six iMacs just sitting around not being used. I thought that I would turn one into an iPod work station, so everyone can use one computer to recharge and hook up to iTunes 7.
Unfortunately, iTunes does not work very well in OS9. Apple decided not to continue to support OS9 very well. I’ve spent several hours attempting to upgrade the iMac so I could set up iTunes 7. Unfortunately, my 3 Panther Installation Discs were mislabeled, and did not allow me to install OSX over OS9. My OSX 10.2.7 Installation Disc is a DVD, and my Tiger Installation disc is a DVD. Neither usable to update the iMac.
All I want to do is set up a dumb iMac as a network interface to my G5 because I've use all of the G5's ports for our recording studio and the iPods need external power source if they are plugged directly into the G5.
If you could show me an easier way to run iTunes 7 on the iMac I wouldn't be as ****** off as I am at Apple for not supporting the 9 older computers I own with usable help and upgrades.

Cant update apps. asks for password for another account i had on a dell notebook. either i forgot the pass word or its not taking it. i can download apps,music with present mac note book but not apps. how can i update apps on my mac and iphone 4?

cant update apps on my mac or iphone4. asks for password for another account i had on a dell notebook. either i forgot the pass word or its not taking it . i can download apps and music. how can i update apps on my mac and iphone 4?

I had the same problem today and was able to resolve it without having to do a restore or reset. The problem had something to do with my mail accounts. The upgrade reset my mail settings, switching both my gmail and my .mac mail to "archive all mail". I went into the General Settings, disabled that setting, and resynced the phone. The "other" storage allottment dropped back down to less than a gig.
Before you restore or reset, I would try that first.

I have a iMac Mid 2011 Mac OSX Lion 10.7.5 How can I update it to 10.8.4? (I purchased 10.8.4 already on the app store)

Hello, I Have a iMac 21.5 inch Mid 2011 running latest version it can (10.7.5) I have purchased 10.8.4 directly from the app store. How can I update the computer to it? Do I simply just double click on on it?
Thanks!

If the installer's on your computer, double-click it and follow the onscreen directions. If not, log into the Mac App Store with the Apple ID used to buy it, click on the Purchases tab, and download it.
(88469)

How can I update my Mac OS X v 10.4 Tiger as because it is out of date I am not able to update Safari or Mozilla and am concerned about security

How can I update my Mac OS X v 10.4 Tiger as apple have no more updates and yet I am no longer able to update my Safari or Mozilla applications please advise me.

Crocosmia wrote:
Thank you for advise, will try apple store another thing how can I increase my ramm and memory
Check your machine's actual specifications here.
It looks like you can support up to 3 MByte in a 17" iMac and up to 4 Mbyte in a 20" iMac, if your cache size coordinates with the specs on the linked page.
OWC says you should be able to put 4 Gbyte into your machine here. Wherever you get the memory, it would be a good addition. This is the Apple Store listing for your machine, as near as I can figure it.

How can i update my xperia ray into ICS?

Similar Messages

Maybe you are looking for