How can I update record in the block that Data Source is PROCEDURE?

I like use Procedure as the Data Source of block.It's very flexible.
Usually I do this only query the record,but now I must update record in the block that Data Source is Procedure.
What next step can I do?Can anyone offer some examples?
This is example, you goto
http://www.2shared.com/file/1923834/e0b65fb7/Example.html
Wait about 30 sec, Click "Save file to your PC: click here",and then you can download it.

<p>I have written an article about some advanced Forms features.
Have a look at the 2.3.2 paragraph</p>
Francois

Similar Messages

I do not want to update to Lollipop right now. How can I get rid of the notification that wants me to install. It says 'Install Later' or Install Now. I don't want to do either so how can I get rid of this notification that keeps popping up?

I do not want to update to Lollipop right now. How can I get rid of the notification that wants me to install. It says 'Install Later' or Install Now. I don't want to do either so how can I get rid of this notification that keeps popping up?

You cannot stop it from popping up.
it will continue every few minutes until its installed.
just keep using the back button near right side of home button.

How can I get rid of the message that I am using a trial version of Photoshop CC even after becoming a paying member for Photoshop CC and Lightroom ?

After having payed fo an account for one year for Photoshop CC and Lightroom 5 i keep getting the message ,that I am using a trial version of Photoshop CC.
Lightroom on the other hand is not functioning in a trial version !
Could anyone tell me how I can start working with Photoshop CC while not in trial mode ?
Peter

I Don’t know how I di dit, but when I started Photoshop this mornig all of a sudden it worked.
I am happy now and thank you for your efforts.
Regards
Peter Hordijk
Van: Rajshree
Verzonden: woensdag 21 mei 2014 19:04
Aan: Peter Hordijk
Onderwerp: How can I get rid of the message that I am using a trial version of Photoshop CC even after becoming a paying member for Photoshop CC and Lightroom ?
How can I get rid of the message that I am using a trial version of Photoshop CC even after becoming a paying member for Photoshop CC and Lightroom ?
created by Rajshree <https://forums.adobe.com/people/Rajshree> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/6398343#6398343>

HT4847 my backup file is too big? how can i change some of the items that are being backed up to decrease size?

my backup file is too big? how can i change some of the items that are being backed up to decrease size?

In iPhoto, Select All the Photos you want to move... Then goto > File > Export >
Choose the settings as seen here
Click Export and select your External Drive
Best to create a Folder to put them in... and away you go...

How can i turn off all the mails that i recive when use any program form my iPad?

How can i turn off all the mails that i recive when use any program form my iPad?

Everytime i use the my ID recive an e Mail to inform me.

HT201363 I have an other Visa card. How can I update this new visa so that I can buy and update apps.

I have an other Visa card. How can I update this new visa so that I can buy and update apps.

Change Payment Information
Settings>iTunes and App Stores>Apple ID>View Apple ID>Sign-in>Payment Information

I use iPhone 5s and iPad Air to take photos. They download automatically to my iMac. However, I often get dups, triplicates or more on the iMac. How can I stop this and how can I get rid of the extras that are already there?

I use iPhone 5s and iPad Air to take photos. They download automatically to my iMac. However, I often get dups, triplicates or more on the iMac. How can I stop this and how can I get rid of the extras that are already there?

Try upgrading your Mac to the newest version of OS X Mavericks, and try upgrading your iPhone and iPad to the newest version of iOS 7.
OS X Mavericks may not be in the Mac App Store by now, but you can find the newest version of Mavericks here at download.com: http://download.cnet.com/Apple-Mac-OS-X-Mavericks/3000-18513_4-76018588.html. Note: Download.com it a safe website to download free software.

HI,How can i set delta option for costumised Generic data source

Hi Sir/Madam,
How can i set delta option for costumised Generic data source.
Regards,
Vishali.R
Please search the forum before posting a thread
Edited by: Pravender on Aug 15, 2011 1:26 PM

Hi,
Go to RSO2 transaction and click on change then on the tool bar click on Generic Delta button. In the next popup you can set your delta.
Regards,
Durgesh.

How can I update iWork using the Mac app store?

I bought iWork on DVD but would like to get the updates via the Mac app store. How can I do that?

HI Judy...
You can only update software from the Mac App Store if the that is where it was purchsed and downloaded from.
Since you installed from the DVD, your updates should be available from your Apple menu > Software Update.

HT2731 How can I update apps when the screen just goes blank?

How can I update apps on my iPad my screen is just blank. My phone updates fine.

There are a number of other threads from people reporting a problem with a blank Updates tab in the App Store app on their iPads - it looks like there is a problem at Apple's end which they need to fix.
Some posts are suggesting that you if you go into the Purchased tab in the App Store app you might be able to update the apps from there, though you will need to scroll through the list (potentially going through the A to Z list on the left-hand side of the screen, and similarly tapping the 'iPad Apps' button at the top left of the screen and selecting 'iPhone Apps') to find those with updates and individually update them.

Frm-41380 error - cannot set the blocks query data source

Fairly new forms so bare with me. I am creating a form based on one table. This table has one column that is a nested table.
table name: szrtime
table columns: szrtime_code, szrtime_styp_list
szrtime_styp_list is a table of varchar2(1).
main block is szvtime_block
the block that contains the nested table is szvtime_styp_block
I read that I could use a WHEN_NEW_RECORD_INSTANCE trigger on the main block to display the related nested table. I have tried the folllowing:
Declare
select_stmt Varchar2(512) ;
Begin
If :szvtime_block.szvtime_code Is not null Then
     select_stmt := '(SELECT column_value FROM TABLE ( SELECT szrtime_styp_list FROM szrtime WHERE szrtime_code = ''' || :SZVTIME_BLOCK.SZVTIME_CODE || '''))';
     Go_Block('SZVTIME_STYP_BLOCK' );
     Clear_Block ;
     message('select_stmt = '||select_stmt);
Set_Block_Property( 'SZVTIME_STYP_BLOCK', QUERY_DATA_SOURCE_NAME, select_stmt ) ;
Execute_Query ;
Go_Block('SZVTIME_BLOCK') ;
Else
Go_Block('SZVTIME_STYP_BLOCK' );
Clear_Block ;
Go_Block('SZVTIME_BLOCK') ;
End if ;
End ;
The result is the frm-41380 error.
I have tried change the query data source type on the nested table block to Table or From-clause but did not help. The select statement that is valid and returns the correct result in Toad.
Any suggestions on what to look for? Thank you.
Todd

> But what is giving me pause is that the user will be updating, deleting, and inserting
into this table and, of course, the nested table column.
It would give me pause, too. I've never used nested tables, so I poked around in Forms on-line help. In Forms 6i, it specifically states that Forms does not support the Nested Table structure.
In Forms 10g help, it describes Nested Table structures, but says NOTHING about how a form would handle it. And that implies to me that it is still not supported. So good luck.
In addition to creating the view, you may need to provide your own nested table updating procedures via a package on the server which your form can call. I know Forms supports passing pl/sql tables ("indexed by binary_integer"), so you could pass your nested table back and forth between the package and the form in that format.

Forms 6.0-- How can I show records in a block in different colours.

In a multi record block, how can I show few records in one colour and few more in a different colour depending on a condition.

Use DISPLAY_ITEM.
This will change the visual attribute of the item in the current(!) record,
set_item_property changes the attributes of the item in all(!) records.

How can I reference records outside the two date parameters?

Hi all,
I have a query that fetches records based on the two date parameters defined (Startdate and Enddate).
If the Startdate is 2014-12-01 and the Enddate is 2014-12-12, I want to pull records outside these two date parameters, that is 2014-09-01 and 2014-11-30.
I want to add up the records from 2014-09-01 and 2014-11-30 and include them in one of the columns in my report.
I tried using this query:
SUM(CASE WHEN FilteredIncident.Statuscodename IN ('QUEUED', 'ASSIGNED') AND (EnteredOn >= '2014-09-01' AND EnteredOn<= @StartDate) THEN 1 ELSE 0 END) AS OpenRecords
Please help with any ideas..thanks

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you probably need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
There is no such crap as a “status_code_name” in RDBMS. It has to be a “<something in particular>_status”; think about how silly that data element name is! Want to keep going and have a “status_code_name_value_id”? LOL!
The name “Filtered_Incident” is also wrong. Tables are sets, so unless you have only one element in this set, the table name should be a plural or (better) collective name. But a better question is why did you split out “Filtered_Incidents” from “Incidents”?
Would you also split “Male_Personnel” and “Male_Personnel” from “Personnel”?
Get a book on data modeling and learn some basics.
>> I have a query that fetches records [sic: rows are nor records] based on the two date parameters defined (report_start_date and report_end_date). If the report_start_date is 2014-12-01 and the report_end_date is 2014-12-12, I want to pull records [sic]
outside these two date parameters, that is 2014-09-01 and 2014-11-30. I want to add up the records [sic] from 2014-09-01 and 2014-11-30 and include them in one of the columns in my report. <<
Having no DDL and no sample data makes this hard. Does your boss make you program without any documentation, DDL, etc? This spec is vague; you say to do a total, but show a count, etc.
One of the many nice things about DATE data types is that the BETWEEN predicate works with them, so you can quite writing 1960's BASIC predicates with primitive logic operators.
Here is a guess:
SELECT SUM(CASE WHEN incident_date BETWEEN '2014-09-01'
AND @report_start_date THEN 1 ELSE 0 END)
AS open_record_cnt
FROM Incidents
WHERE incident_status IN ('QUEUED', 'ASSIGNED')
AND incident_date <= @report_end_date;
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

HT1338 built in camera has stopped working, how can I update or reinstall the drivers

Built in camera has stopped working, how can I reinstall the respective drivers?

Here are my best suggestions for your camera problem, Stephen:
• If you have not already done so, shut down Mac, restart,
    and try again. If the camera still does not work, continue.
• Try ALL relevant suggestions from Apple's Troubleshooting
   article: http://support.apple.com/kb/HT2090
(Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
   If you need to use the "reset" suggestion, use the correct reset for your Mac.
• Use your Mac's Disk Utility to repair permissions and then
   download and apply the latest Combo Update. For your Mac OS,
   the current version is at http://support.apple.com/kb/DL1640
• Repair permissions again immediately following the system restart
   that completes the Combo update.
Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera.
• If nothing else resolves your problem, yours is likely a hardware issue.
   Unless you have a current backup, make one now.
Then use the final "Troubleshooting" suggestion:
"... contact Apple or an Apple-Authorized Service Provider for service."
Message was edited by: EZ Jim
Mac OSX 10.8.3

How to loop through records in the block

Hello,
I have 2 blocks one emp_control_block and the other one based on the emp. The emp control block basically has some search critieria which is then passed onto the emp block to execute the query. However, I don't want to show any emp block data until the user presses the search button in the control block then I automatically want to make visible the EMP block and also set the width of columns. Right now, in the properties I have not assigned any Canvas to the EMP Block
Can anyone tell me How do I loop through the block and show the items/columns in a canvas that I have already created. Any example of the code would be really appreciated. Thanks

Monica,
I tried your code but I get NO NAVIGABLE ITEMS IN DESTINATION BLOCK error. In the property palette for the items in the EMP block I have assigned Null as Canvas because I want to programatically assign it to the emp_stack_canvas. How do I do that? Also I want to change the item width for each column to say a fixed width of 50.
Thanks

How can I update record in the block that Data Source is PROCEDURE?

Similar Messages

Maybe you are looking for