How can I update the firmware all at once

I'm a tech support in a school, approximately our school has over 500 laptops, how can I update the firmware on all laptops at once?

Apple Configurator is the software you want - and it's free from Apple. However, I'm dubious that firmware can be updated all at once.
http://help.apple.com/configurator/mac/1.4.1/

Similar Messages

  • How can i update the firmware on HH5

    I imagine the answer is probably that you cannot do it manually .
    I have only just started to reuse my Home hub 5 last week after initail problems wheni first got it .
    It is running the following firmware from 26/03/14
    How can will it be before the firmware updates automatically .. if ever ..... or can i download tne latest version from somewhere and install it  ?
    BT Home Hub 5 (Type A) | Software version 4.7.5.1.83.8.173.1.6 | Last updated 26/03/1

    there have been a few other posts previously where the hub appeared to take ages before it updated.  you could try a factory reset and then leave conencted and see if that triggers the automatic update
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • How can we update the last synchronization date and time..on SUP in sccm 2012 R2

    Hi,
        Can you any one please guide me how can i update the last  synchronization date & time in SUP on SCCM2012 r2 , some how its updated as future date and when ever i try to synch the SUP with disconnected WSUS its shows in the wsyncmgr.log 
    "Wakeup for a polling cycle " and  " Wakeupby inbox drop" and "Wakeup by SCF change"  
    Thanks 
    Balaji K

    You'll probably have to call CSS on this one as this not normal by any means. The messages you noted above are completely normal but if that's all you are seeing then there's an issue.
    Have you reviewed wcm.log and wsusctrl.log?
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • How can I update the project varibles  in OBPM 10.3

    Hi All,
    OBPM version : 10.3.2 (weblogic Enterprise version)
    How can I update the project variables from the External process?
    I per my knowledge we use termination wait activity and notify the same from the external process. I am successfully do this but I am facing the performance issue with this and sometimes even data sources pool is getting exhausted.
    Could you please tell me is there any other way to update the project variables?
    Thanks in advance.
    Narasimha
    Edited by: Narasimha on Mar 2, 2011 4:19 AM

    I do not disagree with Mark about using Message Waits to update project variables. I'm right in the middle of logic right now that is doing just that.
    If you have thousands (or in your case millions) of instances to update all at once, you might want to also want to consider another approach. I obviously do not know your process and sure you've thought of this, but you could use a database to store this same information that you are currently using project variables for. You'd need a table that has the instance's unique id (e.g. case id, loan number, claim number) as the primary key and then have columns to store the information you are currently storing in project variables.
    Taking this approach, you'd be updating the milliions of rows in the database very quickly. You could still have project variables in your process, but they would be set at the beginning of a Screenflow or in an Automatic activity using a SELECT statement against the database table using the unique id of the instance as the key.
    Dan

  • I have an iPad that I want to update to IOS 5.1. I have several apps that each were installed using a different iTunes ID. How can I update the IOS without losing the apps?

    I have an iPad that I want to update to IOS 5.1. I have several apps that each were installed using a different iTunes ID. How can I update the IOS without losing the apps?

    To update your phone requires using the latest version of iTunes, on your computer, as well as Internet access. The update to iOS 5.0 or higher is an erase/restore deal, so you not only have to make sure all of the content, currently on your phone, is on your computer and accessible, you need to update iTunes first, have Internet access, then update your phone. There is no way around this fact. You could go to an Apple store or use another computer, but you run the risk of losing all of your data it you do that.

  • How do I update the Firmware on the Quantum Router?

    So the Quantom router is missing a bunch of features the old action tech router had.  Advanced filteringis gone, I am hoping a firmware update would bring it back.  I go to look to upgade or check for a firmware update and that isn't there either.
    How do I update the Firmware on the Quantum Router?

    The current Quantum firmware version is 0.26.29.
    Firmware updates are automatically pushed by Verizon.  If you have an older version, reboot the router and it should pickup the new version.
    Enjoy.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • How can i update the REMARK field in ADRT database table

    Hi all,
    How can i update the REMARK field in ADRT database table
    By using Function modules or BAPI’s
    Please reply me fast

    Hi,
    you can try this code:
        SELECT SINGLE * FROM KNA1 WHERE KUNNR = wa_kunnr.
        IF sy-subrc = 0.
          CLEAR adrct.
          SELECT SINGLE * FROM adrct WHERE addrnumber = kna1-adrnr.
          IF sy-subrc = 0.
            adrct-remark = wa_remark.
            MODIFY adrct.
          ENDIF.
        ENDIF
    best regards,
    Thangesh

  • How Can I Update the coils on Quantum PLC...

    Dear Sir,
    I am in the process of configuring Lookout4.5 build9 with Quantum PLC.
    I am trying to write two O/p coils of the PLC using two latchgate
    objects. I am using two different set of push buttons for latching
    and unlatching the two latchgates. After this I have directly
    connected the two latchgates to the O/P coils of Modbus object
    in modbus ethernet mode of communication.
    Now I am using the PLC simulator s/w of PLC to watch the status.
    When I start the first pump (coil1) and Stop the second(coil2),
    after sometime it is seen that the position is reversed such
    that the coil1 is off and coil2 is On. Though here in Lookout
    I see that the latchgate 1 is ON and latchgate2 is OFF.
    I am
    unable to understand this change over in the status of the coil.
    I have read one of the documents on NI website (Document ID:15QA2P9C
    "Why can't I update the coils on Quantum PLC without reading them
    back in?" Report dated:01/27/98). I think my problem is similar
    to that.
    So please tell me a proper method of updating the coils on Quantum
    PLC or how can I update the coils by reading them back ?
    OR is there any problem regarding the modbus.cbx file, if so please
    send me the latest modbus.cbx for Lookout4.5
    Waiting for your earliest response...
    Yours Truly,
    Girish Nalgirkar
    Theta Controls
    Pune, India.

    The KnowledgeBase that you refered to is 3-1/2 years old, and the problem in the modbus driver is long-since fixed. Their are no other known issues with the Modbus driver.
    The method you are using to update the coil sounds appropriate. What I would first verify is that Lookout is not sending a command to toggle the coil.
    1) Write the simplest possible process that shows the problem (ie 2 pushbuttons, the modbus object, 1 latchgate).
    2) Create a "modbus.ini" file in your Lookout directory. Place the following in the modbus.ini file:
    [ethernet]
    DiagnosticPath=c:\
    3) Run your program until the problem occurs. If it does, find the "modbus1" file created in the C:\ directory. This file contains a log of all modbus communication that moved back and forth. Check the
    log to see if Lookout sent a command to the PLC. If no command was sent, then the change occurred internal to the PLC software.
    Regards,
    Greg Caesar
    National Instruments,
    Applications Engineer

  • How can i update modem firmware ?

    How can i update modem firmware ?

    How to update your iPad
    http://support.apple.com/kb/HT4623
    You don't get OTA updates on the iPad until you are already running iOS 5 consequently, the Software Update feature will not appear in the settings until you do so.
    You just posted from the website that had the instructions in it. Did you read them or just scroll down to the bottom and ask the question?

  • How can I update the thumbnails in the slide panel when a slide has been changed?

    When the text in a slide has been changed, how can you update the thumbnail in the slide panel to reflect this change?
    We translated slides, but the slides in the slide panel are still in English.
    Thanks for your help.

    the slides should update automatically as you type
    are you using a  theme you created yourself, or one you have added for this show?
    when you play the show, does the slides show correctly?  If they are OK you could still show the presentation.
    also what Mac are you using and what graphic crd is installed?

  • When i try to update software for my 3rd Gen iPod Touch to version 5 i get the message 'This version of iTunes (9.2.1) is the current version'. My Mac OS is 10.4.11. How can I update the iPod software?

    When i try to update the software for my 3rd Gen iPod Touch to version 5 i get the message 'This version of iTunes (9.2.1) is the current version'. My Mac OS is 10.4.11. How can I update the iPod software?

    The later iOSs requires at least OSX 10.5.8 for the Mac.  You need iTunes 10.5 but 10.4.11 only goes to 9.x.. 10.5.8 is a paid upgrade.
    Are you sure that you have a 3G iPod?  If it is 8 or 16 GB it is a 2G and those can only go to 4.2.1 (also requires 10.5.8 or later). A 32 GB can be either  2G or 3G. To identify yours:
    Apple - Support - Check Your Service and Support Coverage
    Identifying iPod models

  • How can i update the itunes in my external hard drive?

    When i try to update the itunes on my external hard drive, it creates a new application in my computers hard drive. How can i update the one on my external hard drive?

    there's no advantage to having the application on your external drive, you should leave it in your applications folder on your internal drive. if you insist on changing the app's location, you'll always have to then copy the app by hand to the external drive

  • How can i erase the firmware of cisco 7912 phone ?

    how can i erase the firmware of cisco 7912 phone ? the firmware is crashed in this 7912 phone , i want it to download another copy from CUCM8.5 .
    the way i did on 7911phone doesn't work on 7912.

    https://supportforums.cisco.com/discussion/10797901/reset-factory-default-ip-phone-7912
    You can try that procedure but I'm not sure how far that factory reset goes on those phones.  I know the 7940/60 series you can blow out everything except the CNU which would do exactly what you are looking for.

  • How can I update the "basic" Adobe Flash Player that is in my Samsung Smart TV?

    How can I update the "basic" Adobe Flash Player that is in my Samsung Smart TV?

    Any update would come from Samsung, but in low-margin products like TVs, it's pretty uncommon for OEMs to provide ongoing maintenance over a large span of years.  You may find that you'll get a better experience from a dedicated streaming box like ChromeCast/Roku/etc.

  • HT4623 How can I update the IOS on my first generation IPAD? There is no software update option in my settings

    How can I update the IOS on my first generation IPAD? There is no software update option in my settings

    See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
    IPhone, iPod Touch, and iPad iOS Compatibility Chart
         Device                                       iOS Verson
    iPhone 1                                      iOS 3.1.3
    iPhone 3G                                   iOS 4.2.1
    iPhone 3GS                                 iOS 6.1.x
    iPhone 4                                      iOS 6.1.x
    iPhone 4S                                    iOS 6.1.x
    iPhone 5                                      iOS 6.1.x
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1.x
    iPod Touch 5                               iOS 6.1.x
    iPad 1                                          iOS 5.1.1
    iPad 2                                          iOS 6.1.x
    iPad 3                                          iOS 6.1.x
    iPad 4                                          iOS 6.1.x
    iPad Mini                                     iOS 6.1.x
    =====================================
    Select the method most appropriate for your situation.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

Maybe you are looking for

  • Can't send photo from iPhoto 9 to Photoshop Elements 10.0

    I just got a new iMac with Lion 10.7.2 and Photoshop Elements 10.0. In iPhoto 11. I set the preferences to use Photoshop Elements to edit photos. When I double click on a photo, Photoshop Elements Editor comes up, but there is no photo. There has bee

  • Problems with PL/SQL packages

    Hello, I face the following problem with PL/SQL stored procedures. The Oracle version is 8.0.5 on Windows NT 4. The PL/SQL package has a set of procedures and functions. The main procedure of the PL/SQL package is triggered from VC++ executable. If f

  • Shared variable clusters not working as intended

    Hi All, I've been using shared variables to communicate between a host computer and a crio real time target.  This works well as simple variables.  I configured a cluster of shared variables to try and clean up the code a bit. I have a couple of prob

  • DAMN NullPointerException !! How do i get rid of it?

    Hi, My code compiles perfect, but when i run my program i get a "NullPointerException". I spent way too long and dont think I'll ever figure it out. Im hoping somebody can see whats wrong. It happens when I try to assign values to my array of objects

  • Uploading DBF file

    Dear friends,    I'm trying to upload DBF file.    I can easily convert DBF to CSV in excel and upload the CSV file by standard FM. But client wants to upload directly from DBF, no conversion in between.    I resoted to following techniques:-    1. T