How can I update the x-axis to match a time reading in a waveform chart?

I am recording data in real time and displaying it in a waveform chart. However, I have yet figured out how scale the x-axis to match the actual time scale of my data. I've played with the accompanying property node but that has not produced the desired result. My guess is that there is a combination of xscale.range.maximum and xscale.multiplier values that need to get updataed in a certain way, but how is still unknown to me. If you could assist I'd appreciate it.

Nobody has recomended using a Waveform Chart!
A waveform chart will plot the points based on the "t0" of the waveform.
The waveform chart will maintain the buffer so all you have to do is apply the new data.
The "t0"'s of updates from more than one plot do not have to match-up.
See the attached LV7.0 example and jpg.
Ben
Note:
"t0" values for an individual plot must be increasing values.
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
Wform_Times.vi ‏58 KB
Wform_Times.JPG ‏102 KB

Similar Messages

  • How can I update the artwork on iTunes Match?

    When I enabled iTunes Match I had some music that had some album covers that didnt' match or were low resolution.  The album art was embedded on the MP3. 
    I have gone back through my local collection and updated the atwork (removed the embeded art and had iTunes get the artwork).  Now however when I go and look at my iTunes Match songs on another computer or device those album covers did not get upgraded as well.  Is there a process that I need to do to trigger an updat to the iTunes Match service?
    Thanks,
    -Matt

    "I have noticed if the music in your iTunes have album art and you copy that to the iPod it shows up. But any that you have just copied to the iPod without going through iTunes won't show up"
    That is how it's supposed to work. The artwork is stored in an artwork folder in iTunes. It needs to be there to transfer across to the iPod and be viewable.

  • How can I update the thumbnails in the slide panel when a slide has been changed?

    When the text in a slide has been changed, how can you update the thumbnail in the slide panel to reflect this change?
    We translated slides, but the slides in the slide panel are still in English.
    Thanks for your help.

    the slides should update automatically as you type
    are you using a  theme you created yourself, or one you have added for this show?
    when you play the show, does the slides show correctly?  If they are OK you could still show the presentation.
    also what Mac are you using and what graphic crd is installed?

  • How can we update the last synchronization date and time..on SUP in sccm 2012 R2

    Hi,
        Can you any one please guide me how can i update the last  synchronization date & time in SUP on SCCM2012 r2 , some how its updated as future date and when ever i try to synch the SUP with disconnected WSUS its shows in the wsyncmgr.log 
    "Wakeup for a polling cycle " and  " Wakeupby inbox drop" and "Wakeup by SCF change"  
    Thanks 
    Balaji K

    You'll probably have to call CSS on this one as this not normal by any means. The messages you noted above are completely normal but if that's all you are seeing then there's an issue.
    Have you reviewed wcm.log and wsusctrl.log?
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • How can I update the firmware all at once

    I'm a tech support in a school, approximately our school has over 500 laptops, how can I update the firmware on all laptops at once?

    Apple Configurator is the software you want - and it's free from Apple. However, I'm dubious that firmware can be updated all at once.
    http://help.apple.com/configurator/mac/1.4.1/

  • When i try to update software for my 3rd Gen iPod Touch to version 5 i get the message 'This version of iTunes (9.2.1) is the current version'. My Mac OS is 10.4.11. How can I update the iPod software?

    When i try to update the software for my 3rd Gen iPod Touch to version 5 i get the message 'This version of iTunes (9.2.1) is the current version'. My Mac OS is 10.4.11. How can I update the iPod software?

    The later iOSs requires at least OSX 10.5.8 for the Mac.  You need iTunes 10.5 but 10.4.11 only goes to 9.x.. 10.5.8 is a paid upgrade.
    Are you sure that you have a 3G iPod?  If it is 8 or 16 GB it is a 2G and those can only go to 4.2.1 (also requires 10.5.8 or later). A 32 GB can be either  2G or 3G. To identify yours:
    Apple - Support - Check Your Service and Support Coverage
    Identifying iPod models

  • How can i update the itunes in my external hard drive?

    When i try to update the itunes on my external hard drive, it creates a new application in my computers hard drive. How can i update the one on my external hard drive?

    there's no advantage to having the application on your external drive, you should leave it in your applications folder on your internal drive. if you insist on changing the app's location, you'll always have to then copy the app by hand to the external drive

  • How can I update the project varibles  in OBPM 10.3

    Hi All,
    OBPM version : 10.3.2 (weblogic Enterprise version)
    How can I update the project variables from the External process?
    I per my knowledge we use termination wait activity and notify the same from the external process. I am successfully do this but I am facing the performance issue with this and sometimes even data sources pool is getting exhausted.
    Could you please tell me is there any other way to update the project variables?
    Thanks in advance.
    Narasimha
    Edited by: Narasimha on Mar 2, 2011 4:19 AM

    I do not disagree with Mark about using Message Waits to update project variables. I'm right in the middle of logic right now that is doing just that.
    If you have thousands (or in your case millions) of instances to update all at once, you might want to also want to consider another approach. I obviously do not know your process and sure you've thought of this, but you could use a database to store this same information that you are currently using project variables for. You'd need a table that has the instance's unique id (e.g. case id, loan number, claim number) as the primary key and then have columns to store the information you are currently storing in project variables.
    Taking this approach, you'd be updating the milliions of rows in the database very quickly. You could still have project variables in your process, but they would be set at the beginning of a Screenflow or in an Automatic activity using a SELECT statement against the database table using the unique id of the instance as the key.
    Dan

  • How can I update the "basic" Adobe Flash Player that is in my Samsung Smart TV?

    How can I update the "basic" Adobe Flash Player that is in my Samsung Smart TV?

    Any update would come from Samsung, but in low-margin products like TVs, it's pretty uncommon for OEMs to provide ongoing maintenance over a large span of years.  You may find that you'll get a better experience from a dedicated streaming box like ChromeCast/Roku/etc.

  • I have an iPad that I want to update to IOS 5.1. I have several apps that each were installed using a different iTunes ID. How can I update the IOS without losing the apps?

    I have an iPad that I want to update to IOS 5.1. I have several apps that each were installed using a different iTunes ID. How can I update the IOS without losing the apps?

    To update your phone requires using the latest version of iTunes, on your computer, as well as Internet access. The update to iOS 5.0 or higher is an erase/restore deal, so you not only have to make sure all of the content, currently on your phone, is on your computer and accessible, you need to update iTunes first, have Internet access, then update your phone. There is no way around this fact. You could go to an Apple store or use another computer, but you run the risk of losing all of your data it you do that.

  • HT4623 How can I update the IOS on my first generation IPAD? There is no software update option in my settings

    How can I update the IOS on my first generation IPAD? There is no software update option in my settings

    See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
    IPhone, iPod Touch, and iPad iOS Compatibility Chart
         Device                                       iOS Verson
    iPhone 1                                      iOS 3.1.3
    iPhone 3G                                   iOS 4.2.1
    iPhone 3GS                                 iOS 6.1.x
    iPhone 4                                      iOS 6.1.x
    iPhone 4S                                    iOS 6.1.x
    iPhone 5                                      iOS 6.1.x
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1.x
    iPod Touch 5                               iOS 6.1.x
    iPad 1                                          iOS 5.1.1
    iPad 2                                          iOS 6.1.x
    iPad 3                                          iOS 6.1.x
    iPad 4                                          iOS 6.1.x
    iPad Mini                                     iOS 6.1.x
    =====================================
    Select the method most appropriate for your situation.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • How can I format the y-axis to display durations?

    How can I cause the y-axis of this chart to reflect the values in Row 6 [Average Pace (Minutes per Mile)] of the corresponding table in duration format rather than number format. In other words, I need the y-axis to be a list of durations appearing like the figures in Row 6. Also, I need it to begin with the longest duration (10:00) and to climb to the shortest duration (5:00) at the top. I'll should mention that I already tried using the Inspector, but the "Duration" formatting option for the y-axis was not selectable while other formats were. I also tried formatting the y-axis this way to "Same as source data," and this didn't cause it to display durations either, though I had expected it to. Thanks in advance!
    Ryan

    Hi Ryan,
    Numbers can display only numeric values on the Y axis, and those values are always arranged from highest to lowest, with highest at the top.
    That said, here's what is possible:
    There is, of course, some manipulation of the data involved in this, as well as replacement of the value axis labels with custom labels in a text box.
    Here's what's happenng with the man behind the curtain:
    While the chart shows the data from row 6, it is actually graphing the data from row 7 (or whatever row you choose to place this data in.
    Row 7 uses a formula ( =-60*24*STRIPDURATION(B6) ) to first strip the Duration from the data in row 6, returning a number representing the fraction of a 24 hour day equivalent to the duration in row 6.
    It multiplies that number by 24*60 to convert it to the number of minutes (and fractions of minutes) in the duration, and changes the sign of the number to - (negative) so that the shorter values will be higher in the chart.
    Selecting row 7 and choosing Line Chart from the Charts Button's  menu produces, with one difference, the chart shown after setting the min and max values on the Y axis to -10 and -5 respectively, and incrementing the number of steps on the Y axis from 4 to 5).
    The difference, of course, is that the Y axis value labels all show negatic=ve numbers, with no m to indicate they show 'minutes.' To correct this, insert a text box and enter the six numbers 5 to 10, with each followed by an m and a return.
    Select the Text box, change the alignment to Right aligned (with the alignment button in the format bar), then drag the box in front of the Value axis labels with the 5s aligned.
    In the Inspector, choose Text inspector, then Text. Use the Space after Paragraph stepper to increase the setting until the 10 in the box aligns with the 10 in the Value Axis labels box. You may have to tweak the height of the chart slightly to achieve this alignment.
    Select the chart, then choose the Chart Inspector, then Axis. Use Choose Axis Options (for the Value Axis) to uncheck Show Value Labels.
    Regards,
    Barry

  • IOS update to compatible version of my iCloud backup (6.1.4) but not to 7.02. How can I update the IOS to the compatible version 6.1.4?

    Am trying to update my IOS to the compatible version of my iCloud backup (6.1.4) but the update will take me to 7.02. How can I update the IOS to the compatible version 6.1.4?

    You cannot.  However, your iCloud backup will be available to you in the current release of iOS (7.0.2).

  • How can i update the REMARK field in ADRT database table

    Hi all,
    How can i update the REMARK field in ADRT database table
    By using Function modules or BAPI’s
    Please reply me fast

    Hi,
    you can try this code:
        SELECT SINGLE * FROM KNA1 WHERE KUNNR = wa_kunnr.
        IF sy-subrc = 0.
          CLEAR adrct.
          SELECT SINGLE * FROM adrct WHERE addrnumber = kna1-adrnr.
          IF sy-subrc = 0.
            adrct-remark = wa_remark.
            MODIFY adrct.
          ENDIF.
        ENDIF
    best regards,
    Thangesh

  • I cannot update my iPad and notes it cannot be updated due to unknown error (6). I have not yet updated my Macbook to Yosemite (which I do not intend to do so yet) so would this be the problem and if so, how can I update the iPad?

    I cannot update my iPad and notes it cannot be updated due to unknown error (6). I have not yet updated my Macbook to Yosemite (which I do not intend to do so yet) so would this be the problem and if so, how can I update the iPad?
    Thanks,
    glhiker

    Hi glhiker,
    I understand that you may be having some issues with your ability to update your iPad. Here is an article that references your error code and can help you take some steps to resolve it:
    Resolve iOS update and restore errors - Apple Support
    http://support.apple.com/en-us/TS3694
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

Maybe you are looking for