How can I update to Mavericks from 10.7.5?

I am running 10.7.5 on an iMac 3.06 Intel. I have downloaded the dmg for 10.9.5 (from three different locations), and the install won't proceed. It stops and I get a message that says I need 10.9 before I can install. I would rather not try Yosemite just yet, because I'm reading scary things. Not even sure I'd be able to do Yosemite either-
Thanks in advance!

Unless you downloaded the full Mavericks installer from the Mac App Store before Yosemite came out, it's no longer available. The updaters you found aren't it.
Your Mac can run Yosemite.
(120800)

Similar Messages

My ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible

my ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift + restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

How can I upgrade to Maverick from 10.6.8? I cannot seem to find it in the Apple Store.

How can I upgrade to Mavericks from 10.6.8? I cannot find in in the Apple Store. Thanks.

As of now you can upgrade to Yosemite, but not to Mavericks, at the App Store.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

How can i update my ios from Iphone 3g

Hello i need your help my iphone has ios 4.2.1 but i need ios 4.3.1 becouse more aps go with ios 4.3.1 i have iphone 3g 16 gb white
Hallo ich brauche eure Hilfe mein Iphone hat das ios 4.2.1 aber ich brauche das ios 4.3.1 weil viel mehr apps über ios 4.3.1 laufen ich habe das iphone 3g 16 gb weiß
How can i update?
Wie kann ich es updaten?
I´m German but i can speak a little bit english thx
Ich bin Deutscher kann aber auch ein bisschen Englisch , danke

Sorry, you can't. iOS 4.2.1 is the end of the line for an iPhone 3G, there are no further updates available. You'll have to purchase a new phone in order to run a higher iOS.

How can i update the observableList from the database at certain time intervals using threads?

i have a table UI and want it to be to be in sync with tabledata in the database... How can i go about it?

Use a ScheduledService.
The basic idea is
ScheduledService<ObservableList<MyTableDataType>> databasePollingService = new ScheduledService<ObservableList<MyTableDataType>>() {
@Override
public Task<ObservableList<MyTableDataType>> createTask() {
      return new Task<ObservableList<MyTableDataType>>() {
          @Override
            public ObservableList<MyTableDataType> call() throws Exception {
                // connect to database and return list of data....
databasePollingService.setPeriod(Duration.seconds(POLLING_TIME));;
TableView<MyTableDataType> table = new TableView<>();
// configure table etc....
table.itemsProperty().bind(databasePollingService.lastValueProperty());
databasePollingService.start();

How can I update cluster items from inside a while loop that does not contain the cluster?

I have a VI that contains front panel clusters and two while loops. The main cluster contains items such as a doubles "distance" and "stepsize" and boolean "step" (a whole buch of this type stuff). The first loop contains an event structure to detect front panel changes and the second contains code and sub VIs to perform operations based on detected events.
The operator can enter data into either double or click the boolean. If distance is changed the second loop does what is required to process the change. The same happens with stepsize. If step is clicked the ±stepsize value is added to distance and the result is processed. In each case the front panel should track the result of the input and subsequent processing.
Because the clusters are outside the while loop, they are not updated unless I click 'highlight execution' which seems to allow updating each time the execution highlight is updated. There are other issues if I move the clusters into one of the loops.
I've tried referencing the clusters and using local variables and nothing works. It looks like overkill to use shared variables for this.
Any ideas would be greatly appreciated.
Thanks,
Frank

Hi Ben,
Thank you for the response. I followed the link and tried reading everything you posted on AEs but I'm afraid that I didn't understand it all. It seems that each AE example had a single input and a single output (e.g. a double). Is this the case?
What I have is a couple of front panel clusters containing (approximately) 18 control doubles, 8 indicator doubles, 5 boolean radio button constructs and 26 boolean control discretes. I clusterized it to make it readable. In addition I'll eventually have a cluster of task references for hardware handles.
All I want to do is update the front panel values like I would do in a C, VB or any other language. I've tried referencing the cluster and using the reference from inside the loops. I've tied using local variables. Neither works. I'm experimenting with globals but it seems that I have to construct the front panel in the gloabal and then I wouldn't know how to repoduce that on the front panel of the main VI. Sometimes it seems that more time is spent getting around Labview constructs than benefitting from them.
I hope the 'Add Attachment' function actuals puts a copy of the VI here and not a link to it.
Thanks again for the suggestion,
Frank
Attachments:
Front Panel Reference.vi ‏33 KB

How can I update my Mac from OS X 10.5.8 to OS X 10.7?

I am trying to update my kids Mac so that they can get I tunes to work on a brand new Ipod touch and I must have atleast OS X 10.7 to get the Itunes update - how do I do this??

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs. You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57
If you're in the UK, use this number: 0871 508 4400
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.

How can I update a JTextArea from another class

I am new to Java so forgive me if this is confusing, or if I seem to be taking an overly complex route to acheiving my goal.
I've got a JTextArea component added to a JPanel object, which is then inserted into the JFrame. I have a JMenuBar with a JMenu "file" and a JMenuItem "connect" on this same JFrame. When clicked, the actionEvent of JMenuItem "connect" calls a class "ConnectToDb" to establish a connection with the Database. On a successful connection, I want to append the String "Connection Successful" to the JTextArea component, but since the component is a part of the JPanel object, I cannot seem to get access to the JTextArea component to update it. I tried instantiating the JPanel object from within the "ConnectToDb" class and then called a method I created to set the JTextArea. No luck. Can someone give me an idea of what I need to do that would allow me to update the text of the JTextArea component from anywhere in my program? Once it has been contained in the JPanel or JFrame, can it be updated?
This is the class that establishes the simple Db Connection
package cjt;
import java.io.*;
import java.sql.*;
* Get a database connection
* Creation date: (04/01/2002 4:08:39 PM)
* @author: Yaffin
public class ConnectToDB {
public Connection dbConnection;
// ConnectToDB constructor
public ConnectToDB() {
public Connection DbConnect() {
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
String sourceURL = new String("jdbc:odbc:CJTSQL");
Connection dbConnection = DriverManager.getConnection(sourceURL, "Encryptedtest", "pass");
System.out.println("Connection Successful\n");
//this is where I originally tried to append "Connection Successful
//to the JTextArea Object in WelcomePane()
} catch (ClassNotFoundException cnfe) {
//user code
System.out.println("This ain't working because of a class not found exeption/n");
} catch (SQLException sqle) {
//user code
System.out.println("SQL Exception caused your DB Connection to SUCK!/n");
return dbConnection;
This is the JPanel that contains the JTextArea "ivjStatusArea" I am trying to update from other classes. Specifically the "ConnectToDb" class above.
package cjt;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
* Build Welcome Pane
* Creation date: (04/01/2002 3:42:50 PM)
* @author: yaffin
public class WelcomePane extends JPanel {
     private JTextArea ivjtxtConnect = null;
     private JLabel ivjwelcomeLbl = null;
     private JTextArea ivjStatusArea = null;
* WelcomePane constructor comment.
public WelcomePane() {
     super();
     initialize();
* Return the StatusArea property value.
* @return javax.swing.JTextArea
private javax.swing.JTextArea getStatusArea() {
     if (ivjStatusArea == null) {
          try {
               ivjStatusArea = new javax.swing.JTextArea();
               ivjStatusArea.setName("StatusArea");
               ivjStatusArea.setLineWrap(true);
               ivjStatusArea.setWrapStyleWord(true);
               ivjStatusArea.setBounds(15, 153, 482, 120);
               ivjStatusArea.setEditable(false);
               // user code begin {1}
               // user code end
          } catch (java.lang.Throwable ivjExc) {
               // user code begin {2}
               // user code end
               handleException(ivjExc);
     return ivjStatusArea;
* Initialize the class.
private void initialize() {
     try {
          // user code begin {1}
          // user code end
          setName("WelcomePane");
          setLayout(null);
          setSize(514, 323);
          add(getStatusArea(), getStatusArea().getName());
     } catch (java.lang.Throwable ivjExc) {
          handleException(ivjExc);
     // user code begin {2}
     // user code end
This is the main class where evrything is brought together. Notice the BuildMenu() method where the JMenuItem "connect" is located. Also notice the PopulateTabbedPane() method where WelcomePane() is first instantiated.
* The main application window
* Creation date: (04/01/2002 1:31:20 PM)
* @author: Yaffin
public class CjtApp extends JFrame {
private JTabbedPane tabbedPane;
private ConnectToDB cdb;
private Connection dbconn;
public CjtApp() {
super("CJT Allocation Application");
// Closes from title bar
//and from menu
addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
System.exit(0);
tabbedPane = new JTabbedPane(SwingConstants.TOP);
tabbedPane.setForeground(Color.white);
//add menubar to frame
buildMenu();
//populate and add the tabbed pane
populateTabbedPane(dbconn);
//tabbedPane.setEnabledAt(1, false);
//tabbedPane.setEnabledAt(2, false);
getContentPane().add(tabbedPane);
pack();
* Build menu bar and menus
* Creation date: (04/01/2002 2:42:54 PM)
private void buildMenu() {
// Instantiates JMenuBar, JMenu,
// and JMenuItem.
JMenuBar menubar = new JMenuBar();
JMenu menu = new JMenu("File");
JMenuItem item1 = new JMenuItem("Connect");
JMenuItem item2 = new JMenuItem("Exit");
//Opens database connection screen
item1.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
//call the ConnectToDb class for a database connection
ConnectToDB cdb = new ConnectToDB();
dbconn = cdb.DbConnect();
}); // Ends buildMenu method
//Closes the application from the Exit
//menu item.
item2.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
System.exit(0);
}); // Ends buildMenu method
//Adds the item to the menu object
menu.add(item1);
menu.add(item2);
//Adds the menu object with item
//onto the menu bar
menubar.add(menu);
//Sets the menu bar in the frame
setJMenuBar(menubar);
} //closes buildMenu
public static void main(String[] args) {
CjtApp mainWindow = new CjtApp();
mainWindow.setSize(640, 480);
mainWindow.setBackground(Color.white);
mainWindow.setVisible(true);
mainWindow.setLocation(25, 25);
* Add tabs to the tabbedPane.
* Creation date: (04/01/2002 2:52:19 PM)
private void populateTabbedPane(Connection dbconn) {
     Connection dbc = dbconn;
     tabbedPane.addTab(
     "Welcome",
null,
new WelcomePane(),
"Welcome to CJT Allocation Application");
     tabbedPane.addTab(
     "Processing",
null,
new ProcessPane(dbc),
"Click here to process an allocation");
     tabbedPane.addTab(
     "Reporting",
null,
new ReportPane(),
"Click here for reports");
//End
Thanks for any assistance you can provide.
Yaffin

Thanks gmaurice1. I appreciate the response. I believe I understand your explanation. I am clear that the calling code needs access to the WelcomPane() object. I am assuming that the constructor for the calling class must have the JPanel WelcomePane() instance passed to it as an argument. This way I can refer directly to this specific instance of the object. Is this correct?
Also, where would you create the set method? I tried to create a set method as part of the WelcomePane() class, and then call it from the calling class, but it didn't seem to work. Lastly, a globally accessible object? Can you explain this concept briefly? Thanks again for your help.
yaffin

How/can I update itunes library from ipod

I had a previous version of iTunes on a work PC, which I had copied my entire CD collection onto. I have since moved companies and hence lost the laptop. I(maybe stupidly) assumed that I could update the iTunes library from the iPod.
Having searched the support pages, the only way that I can tell to do this was to export the library in the first place, which I did not do. Also iTunes seems to want to delete everything from my iPod everytime I try to do anything?!?
I really want to avoid spending every evening for another week downloading all the albums again, so any help on this would be greatly appreciated!!!
Thanks
Mark

If you are using iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
For all other non purchased music (your own CDs etc) try this method which works on some Windows PCs.
Enable your iPod for disk use.
See: iPod Disk Use.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it can be messy.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended (as previously mentioned) is Yamipod. This is a free program that transfers music and playlists etc from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.

How can i update/Remove Items from AR Invoice using SDK?

Hi All,
I have 1 problem with update or remove item from sales order. here is the source code of mine.
If inv.GetByKey(DocumentNumber) = True Then
                    inv.CardCode = cardcode
                    Dim ercode As Integer
                    Dim ind As Integer = 1
                    For Each drow As DataGridViewRow In gv.Rows
                        If gv.Rows.Count = ind Then Exit For
                        ercode = drow.Cells("No").Value
                        inv.Lines.SetCurrentLine(ercode)
                        'inv.Lines.ItemCode = drow.Cells("itemcode").Value
                        'inv.Lines.ItemDescription = drow.Cells("itemname").Value
                        inv.Lines.Quantity = drow.Cells("qty").Value
                        inv.Lines.Price = drow.Cells("price").Value
                        ind = ind + 1
                    Next
                    errorcode = inv.Update
                    If errorcode <> 0 Then
                        PublicVariable.oCompany.GetLastError(errorcode, errorsms)
                    Else
                        errorcode = 0
                    End If
                Else
                    errorsms = "Not found Invoice Document Number"
End If
After update, it error "[INV1.Quantity][line:1],'Field cannot be updated (ODBC -1029)'"
Does anybody know about this?
Thanks
TONY

Hi $riniva$ Rachumallu,
This is my mistake that not test manually in application.
Thanks
TONY

How can I update my iphone from ios 6 beta to the regular ios 6?

I currently have IOS 6 beta 4 and iTunes nor my phone will allow me to update. I want the additional features that were added. HELP!!!

You might want to check out these two threads:
https://discussions.apple.com/thread/5325838?tstart=0
https://discussions.apple.com/thread/5369545?tstart=200
This topic has been discussed ad nauseum, they might give you some ideas on how to deal with the changes. Be sure to leave Apple your feedback on the matter: http://www.apple.com/feedback/
Good luck!

How can i update my iphone from a different computer?

I dont have internet access and need to update my iphone. Can i use a friends laptop to update it without erasing contacts, notes, etc??

As long as you don't sync after updating it. You may have to connect to your computer to restore music and apps after updating.

How can i update ipad 2 from 4.3.5 to 5.1 or 5.0.1

I am windows 7 user and i cant update fresh ipad 2 from 4.3.5 to any other versions including 5.1. I have tried just normal update, shift + update version and went through apple error fixes, done these steps and still nothing. I am randomly getting 3194, 2005 and 11 error numbers.
What should i do?
I have latest itunes

Connect your iPad to computer (iTune) and Check for Update.
http://i1224.photobucket.com/albums/ee374/Diavonex/154da938.jpg

How can I update my iPhone from 4.3.5 to 5.0.1 (iTunes 10.5.2 not recognizing device)?

iTunes (10.5.2) won't recognize my iPhone even after I've gone through all the steps recommended by Apple Support (restarted iPhone, restarted computer, used different USB port, updated iTunes, removed and reinstalled Apple Mobile Device Service). I think it is because it has been awhile since I last connected my iPhone to my computer and it has an older iOS version (4.3.5). Is there anyway for me to get around this to install the newest iOS (5.0.1 or 5.1) without using iTunes?

You might also want to try a different USB sync cord if your phone isn't being recognized by Windows at all.

How can i update my ipod 1st generation from IOS 4.2.1 to 5.0

how can i update my ipod from IOS 4.2.1 to 5.0

Update it from iTunes on a computer as described at the bottom of this article; there isn't a Software Update option in General on iOS versions prior to 5.0. It can only be updated directly to the newest iOS release supported by the device’s hardware.
The maximum iOS version for the first generation iPod touch and original iPhone is 3.1.3.
The maximum iOS version for the second generation iPod touch and the iPhone 3G is 4.2.1.
The maximum iOS version for the third generation iPod touch and original iPad is 5.1.1.
The maximum iOS version for the fourth generation iPod touch and iPhone 3GS is 6.1.6.
If you don't know what device you have, append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
(110947)

How can I update to Mavericks from 10.7.5?

Similar Messages

Maybe you are looking for