How can I upgrade lightroom 2.7 to 3.7 or 4 ?

how can I upgrade lightroom 2.7 to 3.7 or 4 ?

Which operating system are you running?
Given the (old) age of the version numbers you're quoting, it's possible that your operating system may be too old to run Lightroom 5 or 6.
System requirements | Lightroom
So you may need a new computer before you upgrade your software.

Similar Messages

HT4972 How can i upgrade my 3gs... Im illiterate in laptop on computers?

How can i upgrade my 3gs to ios... I dont know how to use computers... What or how is the easiest way in upgradinG?

the only way to update your iphone3gs is by connecting it to itunes using either pc or laptop, you cant do it in any other way.

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.

Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps!

How can I upgrade my iBook G4?

I have an old iBook G4 with Mac OS X 10.2.8 ... what do I need to download to bring it the most current I can? And how can I upgrade to the latest OS version (whatever it is)?
I would prefer to download as many of the free updates as I can, before I begin buying a bunch of upgrade packs. I tried to do system updates in the system preferences, but it keeps closing on me saying the program "unexpectedly quit". So I can't seem to upgrade anything that way.
Also, I do NOT have the original system disk, but I do have the admin password.
What do I need to do to bring this laptop current - or at least as current as this machine can be?

Hi rsottney!
"So do I need to get 10.3 upgrade before I get 10.4, or can I just go straight from .2 to .4?"
Not if your Mac meets the Tiger System Requirements.
"I tried to do system updates in the system preferences, but it keeps closing on me saying the program "unexpectedly quit"."
You must resolve this issue before upgrading to a newer version of OS X.
Upgrading a problematic system, will only compound the situation.
"...I do NOT have the original system disk,..."
Without those discs, correcting the problem could be difficult.
But you could try running FSCK, as instructed in this KB Article ...perform disk maintenance with ... fsck.
Also navigate to HD Users > The Admin Account > Library > Preferences:
In there, locate the file com.apple.SoftwareUpdate.plist, and move it to the Trash.
Run Repair Permissions.
TO REPAIR PERMISSIONS ON THE STARTUP DISK
1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
2.Click First Aid.
3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
Rerun RP, until the only messages reported, are listed here Spurious Permissions Errors Using: 10.2.x, authored by Michael Conniff.
When "Repair Permissions" is complete. Quit "Disk Utility".
If you purchase a set of install discs, for a newer version of OS X, you could also perform an Erase & Install of the new system.
But if you do not have a backup, you will lose all data.
Mac OS X Versions 10.1, 10.2, 10.3, and 10.4, are complete system upgrades that must be purchased.
Once an OS has been installed, the point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), and 10.4.x to 10.4.10 (Pending), can be downloaded for free.
Tiger is available for purchase at The Apple Store (U.S.).
Panther, is no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
If you know what to look for, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can also be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, FastMac, HardCore Mac, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Jaguar and Panther are only on CDs, not DVDs.
The discs should look exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Caveat Emptor! Examine these items very carefully, and if in doubt, ask questions of the seller before purchase!
Panther On eBay
Tiger On eBay
Also check to see if your Mac model, is listed in this KB Article OS X Must Be Installed On First -8GB Partition.
Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
If your Mac meets the Tiger System Requirements, you could also consider installing that, and then use the PPC 10.4.10 Combo Update, to upgrade to the current version.
Review these Apple documents for Panther System Requirements,
and Additional Panther System Requirements.
Additionally, Tiger 10.4.x ships on a DVD, so if your Mac doesn’t have a built-in DVD-ROM player, you will have to use an alternative method of installation.
Info here Installing Tiger Without A DVD Drive.
The Tiger Media Exchange Program, referred to in that article, is no longer available.
Shop Carefully, Examine All Documentation, And I Wish You Success!
ali b

How can I upgrade my Mac Pro

Hello,
I have a Mac Pro. Here are the specs :
Mac OS X 10.5.8
MacPro1,1
NVIDIA GeForce 7300 GT
When OS 10.6 came out, I found out that I couldn't upgrade to it because of my graphic card. In the technical specifications it is mentioned that :
OpenCL
requires one of the following graphics cards or graphics processors:
NVIDIA GeForce 9400M, GeForce 9600M GT, GeForce 8600M GT, GeForce GT 120, GeForce GT 130, GeForce GTX 285, GeForce 8800 GT, GeForce 8800 GS, Quadro FX 4800, Quadro FX5600
ATI Radeon 4850, Radeon 4870
Now, OS 10.5.8 is becoming more and more outdated. I would like to know how can I upgrade my Mac Pro ? What kind of graphic card can I put in ?
Thank you for any help and/or information !

Dalfe wrote:
Hello,
I have a Mac Pro. Here are the specs :
Mac OS X 10.5.8
MacPro1,1
NVIDIA GeForce 7300 GT
When OS 10.6 came out, I found out that I couldn't upgrade to it because of my graphic card. In the technical specifications it is mentioned that :
OpenCL
requires one of the following graphics cards or graphics processors:
NVIDIA GeForce 9400M, GeForce 9600M GT, GeForce 8600M GT, GeForce GT 120, GeForce GT 130, GeForce GTX 285, GeForce 8800 GT, GeForce 8800 GS, Quadro FX 4800, Quadro FX5600
ATI Radeon 4850, Radeon 4870
Now, OS 10.5.8 is becoming more and more outdated. I would like to know how can I upgrade my Mac Pro ? What kind of graphic card can I put in ?
Thank you for any help and/or information !
It's been a while since I've used it but I installed Snow Leopard on my old Mac Pro 1,1 with the 7300GT and it worked. OpenCL may not have but the rest of it did. I don't think what you've quoted says you can't upgrade but only that an upgrade won't deliver all of the features in Snow Leopard. Indeed, I was able to move the HD in the 1,1 Mac Pro into the 5,1 Mac Pro, boot from it (10.6.4 is the minimum the 2010 Mac Pro will boot with), clone it and then updated it.

How can I upgrade from Infinity to 56K dial-up?

I have had Infinity for about a month. At first everything was great, 38Mbps. I am about 25m from the cabinet where the optical fibre is terminated so I expected this to be quite consistent.
Seven days ago the speed dropped to about 5Mbps and over the next 12 hours or so dropped even further. The last time I managed to get a download speed measurement I recorded a speed of 28.2Kbps (yes, that is Kilobits). I have not had a speed as low as that in almost 20 years. Currently the BT speed tester is not working, I suspect my speed is too slow for it. The BBC speed tester reports my speed as being 0Mbps.
I have called the BT help line every day since and have been told today that it has finally been escalated to the BT Openreach Engineering Dept. I am told that an engineer will visit me in 3 days time to fix the problem. Why has it taken a week to do this and why can somebody not do something quicker? Is BT Infinity so bad that all the engineers are running around trying to get it to work. People always go on about Microsoft getting customers to test their products, I think BT are doing the same thing with a product which is obviously not suitable for it's task.
This is absolutely awful customer service. Seven days for a succession of "support engineers" a few thousand miles away reading from a prepared script is not my idea of looking after customers.
I cannot express how this has changed my opinion of BT.
A few years ago I worked for a major supplier of satellite communications equipment. BT were one of our first big customers. We had to jump though so many hoops before we installed the equipment it was unbelievable. The system was tested to death before it entered service. What has happened to this level of quality control?
To reiterate the subject heading - how can I upgrade from BT Infinity to 56K dial-up?

Hi Satcomman,
Welcome to the forums! I'm sorry to hear of the problems you're having with your speeds. If you could fill out our contact webform (you can find the link in my profile under "about me") and include details of your home network setup, I'll be able to run a few checks and hopefully find out where the problem lies.
Dean
BTCare Community Mod
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I would like to connect a printer that requires OS 10.6 or newer. My MacBook is currently using OS 10.5.8. In searching for a software update, I am told no updates are needed. How can I upgrade my OS to 10.6 or better?

I would like to connect a printer that requires OS 10.6 or newer. My MacBook is currently using OS 10.5.8. In searching for a software update, I am told no updates are needed (and am given no option for updating my OS). How can I upgrade my OS to 10.6 or newer?

You have to understand the difference between an Update and an Upgrade.
An Update is a free change to add to the base code or as a bug fix within an existing Operating System. Such as the .8 added to OSX 10.5 or the .11 added to OSX 10.4..
An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
10.5 Leopard was written for Power PC Macs with code added to force it to run on Intel processors.
10.6 Snow Leopard has completely rewritten code and only runs on Intel Macs.
10.7 Lion ($19.99) used some 32 bit which allows it to run on Late 2006 through Early 2008 MacBooks and a lot of 64 bit code.
10.8 Mountain Lion ($19.99) is pure 64 bit, which excludes more systems than Lion did. It can only run on the Late 2008 through Mid 2010 MacBooks. It's not something you can add memory to, for example, as it involves the base architecture.
10.9 Mavericks is pure 64 bit and is a free download from the App store.
The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard After you’ve installed that then download the 10.6.8 combo updater to finish it off. http://support.apple.com/kb/DL1399 You will need to be running 10.6.8 to access the App Store to order Lion, Mountain Lion or Mavericks which are downloads only.
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.

Everytime I try to update to iOS5 on my iPhone 4 I get an error containing 0xE while it is trying to backup data from the iPhone. I have done everything suggested in Apple support. How can I upgrade to iOS5 without losing all the data on my phone?

Everytime I try to update to iOS5 on my iPhone 4 I get an error containing 0xE while it is backing up data from the iPhone before installing the new operating system. I have done everything suggested in Apple support with no success. I still get the error everytime (about 5 minutes into backing up iPhone data). How can I upgrade to iOS5 without losing all the data on my iPhone (the error message says that if I continue I will lose all data on the phone)? If I have already synced the phone before upgrading the OS, would I be able to restore my data after installing the new OS by syncing after the OS upgrade is complete? Any help would be greatly appreciated.

I had the same problem today and was able to resolve it without having to do a restore or reset. The problem had something to do with my mail accounts. The upgrade reset my mail settings, switching both my gmail and my .mac mail to "archive all mail". I went into the General Settings, disabled that setting, and resynced the phone. The "other" storage allottment dropped back down to less than a gig.
Before you restore or reset, I would try that first.

How can i upgrade my iPhoto 7.1.5 to a newer version? the download 8.02 will not work as i need 8 and that isn't available on download on the site?

How can i upgrade my iPhoto 7.1.5 to a newer version? the download 8.02 will not work as i need 8 and that isn't available on download on the site?
Thanks x

You can upgrade to iPhoto '11 with OS X 10.8.5 by purchasing an iPhoto '11 DVD from Amazon, eBay or other source - or you can upgrade your OS to Mavericks for free if your system meets the requirements and then purchase the upgrade to iPhoto '11 version 9.5.x from the App store - in either case backup first in case of problems
LN

How can i upgrade from iphoto 7.1.5 to 8.1.2 on an older iMac running OSX 10.6.8 ?

How can I upgrade from iphoto 7.1.5 to 8.1.2 on an older iMac running OSX 10.6.8 ?

With the above listed config that I have (iphoto 7.1.5 on an older iMac running OSX 10.6.8), how can I move my iPhoto library from this old iMac (2006) to my NEW iMac (2011) that is running iPhoto 9.5.1 ?
To open an iPhoto 7.1.x version in iPhoto '11 you need to run the iPhoto Library Upgrader. See this Support document:
iPhoto '11: About the Library Upgrade
Download and install the upgrader, then run it on your iPhoto 7.1.5 library. After that, iPhoto will be able to open your library and upgrade it to version 9.5.1. And you will be able to merge the libraries with if Library Manager.

My cd/dvd drive isn't working and i want to upgrade my mac os x10.5.8, how can i upgrade without the software CD

my cd/dvd drive isn't working and i want to upgrade my mac os x10.5.8, how can i upgrade without the software CD

I think not. You will need to order a disc from Apple quoting your serial number, as many of these discs are machine specific. So unless you can get your drive working I think you will have to take a trip to an Apple store.
Indeed, you have an old computer that may not be worth the cost of repair ... but it is still worth seeking Apple advice and a visual inspection. It just might be something not too drastic.

How can I upgrade from OSX 10.7 to 10.9 on my 2012 mac mini? (2.3 GHz, 4 GB, 500 GB SATA disk) I don't want OSX Yosemite.

How can I upgrade from OSX 10.7 to 10.9 on my 2012 mac mini? (2.3 GHz, 4 GB, 500 GB SATA disk) I don't want OSX Yosemite.

If your Mini shipped with OS X 10.7 Lion, then it was considered a 2011 build model, or before.
The Mini 2012 model, is considered a Late 2012, & the last one where RAM could be upgraded.
And it shipped with Mountain Lion 10.8, which is a fairly OK system if one had older software.
(However mine shipped in Dec 2014, with Mavericks 10.9.0, and was built in January 2014.)
There were a few different build versions of Late 2012 Mac Mini, the i5 or i7 processor,
in dual-core or quad-core, and some CTO or built-to-order versions with other specs.
You can buy Mountain Lion from online Apple Store, & use a download code emailed to you to
get the Mt. Lion 10.8 from Apple Servers; this would be about it, since Mavericks isn't available.
So hopefully that is an option you can exercise; in addition the computer may prefer more RAM.
Good luck & happy computing!

I would like to upgrade my macbook from 10.6.8 to Mountain lion. however, the app store said that my macbook isn't compatible with the mountain lion . Why can't I update it to mountain lion? and How can I upgrade it to a newer version ?

I would like to upgrade my macbook from 10.6.8 (Snow Leopard) to Mountain Lion. However, app store said that my macbook is not compatible with Mountain Lion? Why can't I upgrade my macbook to mountain lion? And How can I upgrade my macbk to a newer version such that I can download the newest version of imovie?
Here r the system info of my macbook:
Mac oS X (version 10.6.8)
Processor :2.2 GHz Intel Core 2 Duo
Memory: 2 GB 667 MHz DDR2 SDRAM
Model Identifier: Macbook 3,1
I

Requirements for Mountain Lion:
http://www.apple.com/osx/specs/

HT1444 how can I upgrade my macbook from 10.5.8 version to the latest version

how can I upgrade my macbook from OS X 10.5.8 version to the latest version?

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs. You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57
If you're in the UK, use this number: 0871 508 4400
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade all the way to Mountain Lion:
http://support.apple.com/kb/HT4759

How can I upgrade Windows 7 32 bit to 64 bit on Mac Pro bought in 2011?

I was able to install Windows 7 32 bit version on Mac Pro bought this year with OS 10.6.7 version with bootcamp. How can I upgrade it to Windows 7 64 bit?

Custom clean install is the only way - you can't 'upgrade' 32-bit OS to 64-bit, they are different kernel and drivers.
Windows 7 Upgrade and Migration
Windows 7- Clean Install Vs Upgrade

How can I upgrade lightroom 2.7 to 3.7 or 4 ?

Similar Messages

Maybe you are looking for