How can I upgrade Windows 7 32 bit to 64 bit on Mac Pro bought in 2011?

I was able to install Windows 7 32 bit version on Mac Pro bought this year with OS 10.6.7 version with bootcamp. How can I upgrade it to Windows 7 64 bit?

Custom clean install is the only way - you can't 'upgrade' 32-bit OS to 64-bit, they are different kernel and drivers.
Windows 7 Upgrade and Migration
Windows 7- Clean Install Vs Upgrade

Similar Messages

How can I upgrade Boot camp 3.0.4 on macbook pro (os x v10.6.8)?

How can I upgrade Boot camp 3.0.4 on macbook pro (os x v10.6.8)?

Apple Software Update in Windows or manually.
Recent updates:
Boot Camp Software Update 3.3 for Windows
Boot Camp Software Update 3.2 for Windows 64 bit
Boot Camp 3.2 Update for iMac (early 2011)
Boot Camp 3.2 Update for MacBook Pro (early 2011)
Boot Camp Software Update 3.2 for Windows 64 bit
Boot Camp 3.0, Mac OS X 10.6 FAQ
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions
http://www.apple.com/support/bootcamp/

How can I install Windows 8.1 Enterprise on my Macbook Pro With BootCamp?

How Can I Install Windows 8.1 Enterprise on my MacBook Pro?

Hi Armin.S,
I apologize, I'm a bit unclear on the exact nature of your question. If you are asking about the system requirements for running various versions of Windows under Bootcamp, or just more generally how to set up Bootcamp on your Mac, you may find the following articles/pages helpful:
Boot Camp: System requirements for Microsoft Windows operating systems
http://support.apple.com/kb/HT5634
Mac Basics: Using Windows on your Mac with Boot Camp
http://support.apple.com/kb/HT1461
Apple - Boot Camp Support
https://www.apple.com/support/bootcamp/
Regards,
- Brenden

How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.

How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.
I have Boot Camp 5.1.2 (497) and there is no option for installing using USB. I have downloaded an image of Windows 8.1 already.
I can't install using DVD R/W because it's not working.
Please help me.
Thank you.

unlocked by myself
thanks

How do i install windows 8 on a late 2012 mac pro?, how do i install windows 8 on a late 2012 mac pro?

how do i install windows 8 on a late 2012 mac pro?

Follow the directions here http://www.apple.com/support/bootcamp/

How can I download an adobe trial version in my Mac Pro X 10.9.5?

How can I download an adobe trial version in my Mac Pro X 10.9.5?

From Adobe's website: http://www.adobe.com/downloads.html

How can I install Windows7 -64BIT on a 1st Generation Mac Pro 2.66GHZ Quad?

Hi,
I posted this in Bootcamp but haven't received any replies so I am reposting it here where perhaps it really belongs.Is it possible to install Windows 7 64 bit on a 1st Generation Mac Pro 2.66Ghz?
Apple suggests that it's not possible and yet I've seen several Googled posts where the users have successfully installed 64 bit on a 1st Generation Mac Pro. The problem is that they've done this creating a bootable iso disk(whatever that is) using a Windows computer with imgburn and windows commands. I'm pretty good at following instructions but I haven't seen any instructions on how to install Windows 7 on this machine using a Mac based approach.
I'm using BootCamp and was able to partition the drive into NFTS and "proceed" with installation; however all the installations failed during setup and Windows would not boot; disk repair was not possible. Besides, from what I've gathered, 32 bit is problematic around memory issues.
When I try installing 64 bits, I never get past the "select cd rom 1 or 2" message where the keyboard won't work. It is at this point where others say they have successfully proceeded with moving forward by creating a bootable iso disk.
Problem is it's all Windows based with exe files and presupposes I already have Windows running.
I'm not sure I really understand how to create an iso disk, but I do have ROXIO TOAST 10 which is capable of burning "ISO" disks.Does anyone know how to do this and/or can you point me to a place where there are instructions on how to proceed?? While I realize Apple says that some mid 2006 mac pros aren't supported, there are multiple posts of windows 7 users successfully installing Windows 7 on a 1st Generation Mac Pro.
Thanks.
Mac Pro 2.66GHZ Quad Core

I have a March 2009 Mac Pro dual quad core running Win7 Pro 64 bit. I have Windows installed on a dedicated internal hard drive. There are no partitions, the entire drive is for Windows use.
Here's how I installed it, I did not start with BootCamp. Make sure the drive you're going to use for Windows doesn't have any important files on it because it will be formatted.
1. Update Snow Leopard
2. Place the Windows cd in the Super Drive
3. Shut down the computer
4. Remove all the hard drives except the one you want Windows installed on. Keep track of the order they are in and at the end replace them in the same order.
5. Boot the computer holding down the Option key
6. Boot to the Windows cd
7. Install Windows and format the drive to NTFS
8. When Windows needs to restart during installation you'll need to hold the Option key and boot to Windows, not the Windows cd.
9. After Windows installs, place your Snow Leopard disc in the Super Drive
10. The Drivers for Windows will be installed along with a Windows version of BootCamp.
11. Go to Start > All Programs > Apple Software Update
12. Update again until it's done.
13. You'll also find a BootCamp under Control Panel, check it out.
14. Shut down the computer and replace the hard drives in their original order
14. Now if you turn on the computer it will boot to Snow Leopard, but if you hold the Option key during boot you can select Windows or Mac.

How can I upgrade Windows Server 2012 Essentials to Windows Server 2012 R2 Essentials?

I have just installed Windows Server 2012 Essentials on my Home Network (from the installation DVD). I have done absolutely no configuration Installing Server 2012 was an oversight; I meant to install Server 2012 R2 Essentials.
I tried to correct by installing R2 from its DVD, hoping it would do an upgrade. That didn't work.
Is there a simple way to make it possible to install the correct OS?   For example, can I just demote the existing server and remove any roles that were installed, so that the R2 disk will install over top of the existing installation?
Alternatively, is it safe to just reformat the partition and install R2?
http://technet.microsoft.com/en-us/library/dn408635.aspx seems to imply that this is OK.
David Pike, P.Eng, MCITP

Hi Larry.   Thanks for the reply. It didn't work, but I don't believe you are wrong. Rather I think there is something weird in my system. I'm marking your reply as answer.
Some background: I'm repurposing an older PC (Compaq SR1614X) as a home server, to manage my home network, use as a gateway to my Azure server, and to help my Server 2012 training (on MVA). I've been messing with it for nearly two months,
on and off. From the start, I've had trouble installing the server 2012 software (see previous threads August-27 and August-16
), but when I got to the point that I could install Server 2012 Essentials, I thought I could upgrade to Server 2012 R2 Essentials exactly as you suggest. That was where you helped me a lot, i.e. you confirmed that my expectations were reasonable.
So when it didn't work, I spent most of yesterday trying various different procedures. I got tantalizingly close, but still no cigar.
I can install any Windows Client and Server 2012 Essentials, but the R2 Essentials installation never finishes; it goes into an "error 0x000000C4" boot loop. At first I wondered if it was because I was installing a server over a
server, but you confirmed that's not the issue. I later verified that I cannot install R2 over Windows 7 either, whereas R1 over Win7 is fine. I can only surmise one of two problems:
I have a bad installation disk
There is a hardware issue
I plan to eliminate (1) by creating a new disk from a new download. I have verified that the latest ISO file and the one I have been using have identical byte counts,
For (2), I had suspected that the problem was that the older system has no UEFI, but since R1 installs OK, I am discounting that. Today's effort: to eliminate the DVD drive, I will try booting from a Flash Drive. To eliminate
the hard drive, I will try installing to a different drive.
I am hoping you can help with one more thing. When I run setup.exe with the /noreboot option, I have a better chance of success. The option suppresses the first reboot only, but that one (after "Expanding the setup files") always
fails, so suppressing it gets me almost to the end of the install. Is there a way to modify setup.exe so the it always runs with the /noreboot option?

How can to connect 3 displays with resolution 2560x1600 to MAC Pro?

How can I connect 3 Dell U3014 displays (resolution 2560x1600) to MAC Pro?

Mac Pro 2013
DisplayPort, Mini DisplayPort, DVI, HDMI

How can I replace my start up hard drive in mac pro 2008?

Mi hd is geting old and I am worry about loosing Everything any time how can I replace my HD without reinstaling Every single Aplications?
Any Advice thanks.

Clone it.
Or install OS X and it will ask to use Setup Assistant and import everything when it sees another system drive.
Use cloning as a backup method.
Keep only the OS and apps and a small user library on the boot drive.
Now is a good time to invest in an SSD for your system.
A new drive for data and media files.
Use your existing drive(s) as backups and pull them once the system and data are copied, cloned, and moved over.
Use TimeMachine for some file backup as well.
Clone your system:
How to Clone a Volume
Using Cloning as a Backup Strategy
See also Erasing a Drive, How and Why to Partition a Drive, RAID.
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner

How can I enable the GPU option on a new mac pro with 2 AMD D700 graphic cards?

I have recently purchased the new mac pro and I saw the GPU option is not enable and only recognizes the CPU one, what is frustrating. Does anybody know how to enable the GPU option?
thanks

See this for details of how the GPU is used in After Effects:
http://blogs.adobe.com/aftereffects/2012/05/gpu-cuda-opengl-features-in-after-effects-cs6. html
Note that your card will be used for all of the GPU acceleration features but one---the ray-traced 3D renderer---which requires an Nvidia GPU. That is an obsolete feature that you don't need to worry about, anyway. There are many better alternatives to using 3D in After Effects, including Cinema 4D, which is now included with After Effects:
http://blogs.adobe.com/aftereffects/2013/04/details-of-cinema-4d-integration-with-after-ef fects.html

How can I back up a MacBook Air on a Mac Pro Hard Drive using Time Machine?

Want to back up a MacBook Air on a Mac Pro with a spare hard drive. Sharing allows Time Machine to find the hard drive, but get a drive busy message when time machine tries to back up onto the drive.
Any suggestions?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to a failed backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

How can I upgrade windows parallels desktop, now moved to Incompatible Software?

I just upgraded the OS to Mountain Lion and was surprised to learn that my Parallels desktop will not work. It seems my Mac suggests that I buy the software again, but surely it must be possible to upgrade it? I am a rather new Mac user and am rather lost

HI,
For reference, I am running Parallels 7.0.15106.786747 under Mountain Lion with a Windows 7 Ultimate VM without major issues. The only problem I have encountered is an unresponsive Parallels menu once the VM is up and running. I have to shut show the VM and restart Parallels in order to access the menu items (e.g., to get the version number for this post).
Cheers,
Warren

How can I play Windows games that require CD on mac mini bootcamp?

Hey!
So have a brandnew optical drive-less mac mini, and have Windows 7 installed as bootcamp partition. Want to play a game on the Windows side but it requires a CD be in the drive to play - which, obviously, I don't have. I tried Carbon Copy Cloner to a USB stick - it worked for the installation but not the game play. Any suggestions how I get an image to mount that the Windows Bootcamp will recognize? Is it possible to mount the CD as a shared disk on my G5 elsewhere on my network or should I just stick to Daemon Tools or MagicISO stuff on Windows. If the latter - how do I get the data from a USB stick mounted as a disk image then (do I need to copy it to the local, then create a disk image and then copy to that image for example?)
I can see this is going to be a problem for all sorts of other things I still have "legacy" I can see so any help on this will carry forward, thanks.

Yeah, I know, but the whole idea of moving away from disks isn't such a bad one - so I'm wondering if I can implement it someway - I have the original copy disks so it's not about pirating them to play games but ripping them the right way so they work... hmmm.

How can I enable 16 outs from Logic with Intel Mac Pro?

Hi everyone,
I am a bit new to the digital output world! I have a Digi002 with Logic 7 and I have a Behringer A/D converter box to recieve digital output using optical cable. My question is this: I can only see 8 normal stereo outputs plus additional 9-10 output. Is there a command in Logic (as per the old "enable 16 in/outs in 5.5)to allow the greyed out extra outputs to work? or I am being very stupid and not enabling some command on the Mac?
I thank you all in advance for any kind responses!

I see you're using a Behringer A/D converter. I had one of these once. It made a lot of noise: crackling, pops etc. I know that was the cause as they only happened on those 8 tracks.
I may have had a lemon, but if you get similar problems, (and I hope you don't) I have changed to the Alesis AI3 and now have no problems, it might be worth you making a mental note.

How can I upgrade Windows 7 32 bit to 64 bit on Mac Pro bought in 2011?

Similar Messages

Maybe you are looking for