How can I upload text master data for attribute-only Charactertic?

I can't create infosource for attribute-only Charactertic via direct update from Infoobject, because attribute-only Charactertics you can't choose from available infoobject.
How can I upload text master data for attribute-only Charactertic?
Thanks!

Hi roberto,
I soloved the problem. I can input the attribute-only char directly in the text box instead of choosing from list of infoobjects, but I still can't find the char in infoobject selection dialog even using search.

Similar Messages

Upload SNP master data for future Materials

Hello Everybody,
I am working on SCM 2007 and due to client's business requirements, I need to load the SNP master data of the new materials which presently do not exist in my R/3 system and will be produced/introduced after six months.
Client wants to do the forecasting for such materials from now onwards. Since, these materials do not exist in R/3, I cannot CIF and bring the master data in my APO system. Please suggest, how can I load SNP master data for such materials. Is there any standard tool available for the same?
Kind Regards,
Rahul

Hi,
If you require product locations only for forecasting I guess you will require only products and locations to be define in APO. I would suggest that you can create a seperate Model for this product locations which is not their in ECC and do the forecasting if it satisfies your business requirement, the reason being once you create master data directly in APO it will not be possible to CIF the master data fom ECC which will create inconsistency.
You can use LSMW also to upload product and location if you are not defining comples parameters like Time phase cost in Product location & their are not many validation which I assume will be the case.
Thanks,
Sanjog

Error in uploading TEXT master data

I got the following error while Creating Infopackage for uploading TEXT Master data:
Error 8 when compiling the upload program:row 431, message: A newer version of data type
/BIC/B0000102000 was
Can anyone let me know how to solve this issue?
Thanks,
Soujanya.

Hi Soujanya,
Check whether the row 431 is having proper data that i matching in Data type with the IO.
Also activate the transfer rule/ Transformations if any. Then try loading the data.
If you are trying to load the Data through the Flat File, close the *.CSV file before actually loading the data & dont open it till it is successfully loaded.
Hope it helps!
Regards,
Pavan

How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?

hello,
How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?
thanks,
Jay

Hi,
I understand that it applied first logo to all other sub sites.
Please make sure that you change the logos in the subsites.
If we change the logo in the root site, the logos in the subsites will be changed at the same time.
However, we can change the logo in the subsites separately.
We can go to a subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo->select a picture, then it will has a different logo than the root site.
Then go to the other subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo-> select another picture, then it will has a different logo that the first subsite.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How can i check my purchase date for my apple 5s

how can i check my purchase date for my apple 5s

Plug the SN in here:
https://getsupport.apple.com/ProductSelector.action
iPhone warranty starts the day the phone is first sold.

How can i activate use cellular data for facebook

how can i activate use cellular data for facebook

pepaycustodio wrote:
how can i activate use cellular data for facebook
Settings > Cellular > Cellular Data: ON

How can we upload the Time data into SAP system

Dear all,
ingeneral which method we can use to read the Time data and how can we upload that data into SAP system. Please any one can answer this asap.

In the recent project that I have done.. the time data is uploaded from the external time recording machine.. in the form a file...
The other way is through CATS... which in turn will populate the time entries as per hte work schedules... and will explicitly have to populate the deviations to the work scheudle by going through transactions..
Please reward the points if it is helpful...
Regards,
Suvan,
Yash Technologies Pvt Ltd, Hyderabad.
Message was edited by:
Suvan

Flexible Upload of master data including attributes - error at new attrib.

Dear all,
trying to use the flexible upload for loading master data with attributes the system aborts if there new values have to be created for attributes, e.g. New Business Unit has region FR, Region FR actually does not exist as key. Therefore at first the value for Region has to be created within BCS and after that the load of the new Business Unit will be successful.
Does anybody know if it possible or which seeting within the upload customizing must be chosen that the new attribut value automatically could be created during upload of the main characteristic?
Kind regards
Dieter

Hello Dieter,
your first way was the right way - befor you can upload Business Units with attribut FR you have to create the attribute in BCS.
It is not possible to create master data for two different characteristics in one flexible upload method.
In the definition of the upload method you have to choose which characteristic you try to upload...
best regards
Thomas

How can i make the Master data extractor to delta enable

Hi,
I am working on 0EQUIPMENT_ATTR(Master data).
I want to load the data to ODS,
By default SAP has not provided delta for this Object.
can anybody know how to make this 0EQUIPMENT_ATTR to delta enable.
or any other solution.
its urgent..
help me
Madhu

Hi dear and welcome on board !
If a std datasource is not available in delta mode, you cannot change it in order to deliver a delta...if you consider your requirement absolutely necessary, you can go for a generic datasource (RSO2) and try to set a generica delta...
Hope it helps!
Bye,
Roberto
...please don't forget to reward the answers...it's THE way to say thanks here...

How can we delete HR MASTER DATA of employees

Hi all,
i need ans for this .
Actually i don't need 3 persons information in hr master data.So how can i delete this,when iam trying to delete it is showing time constraint is 1.So tell me how to do this.
Thanks in adv

Thank you suresh,
My problem has solved.
Thank u very much.........

Not able to load text master data for customer infoobject

Hi Guys,
I am not able load master data text to the customer infoobject.
I have a infoobject-A which is loaded with 1000 records, out of which only 100 records are with text and remaining are without text.
I have run a repair full request(extraction from ECC) and
i can see data till PSA(the 100 records which are with text are no more available in ECC now).remaining 900 records are available with text till PSA but not updating to target infoobject.
I have 3.X flow and i have checked transfer rules update rules and tried everythign from side-but no use-still not not working.
Please post your suggestions.
Thanks in advance
Regards,
Siva

Hi Ramanjaneyulu,
Transferrules screen shot:-
update rules
Regards,
Siva

Please help : How can I upload Multiple Telephone numbers for BP

Hi
Iam Uploading Business Partner Master data of Type Person and Organization with the Below Approach
LSMW - IDOC METHOD (Messagetype -CRMXIF_PARTNER_SAVE_M, Basic type - CRMXIF_PARTNER_SAVE_M02)
XIF ADAPTER
DATA TRANSFER WORKBECH (SXDA)
with Below Flat File Structure
1) IDNUMBER
2)LAST NAME
3)COUNTRY
4)TELEPHONE1
5)TELEPHONE2
6)TELEPHONE3
7)TELEPHONE4
8)EMAIL etc.,
When we are Uploading the data, the First Telephone number(TELEPHONE1) and the remaining data is uploading successfully except the 3 Telephone Fields
( TELEPHONE2,TELEPHONE3,TELEPHONE4)
We are facing trouble in uploading Multiple Telephone numbers and I created BP Master data with Multiple telephone numbers through SAPGUI.
Please help, as I am not sure about the procedure of uploading multiple telephone numbers using LSMW Method
I tried some programming on CONSNUMBER Field (in Maintain field mapping and conversion rules) still I am unable to upload
Looking for Help.
Warm regards
BMS

Hi vijay
I am using the below target structures
E102BUS_EI_COMMUNICATION   External Interface: Communication Types
E102BUS_EI_TEL_DATA    External Interface: Communication Data Telephone
E102BUS_EI_BUPA_TELEPHONE   External Interface: Data for Telephone
E102S_EI_BUPA_TELEPHONE_CON    External Interface: Data for Creating a Telephone Number
E102BUS_EI_STRUC_TEL_DATA   External Interface: Structure TEL_DATA
among the above structures
I am assigning 'M' to target structure field
E102S_EI_BUPA_TELEPHONE_CON-TASK = 'M'.
and for E102BUS_EI_STRUC_TEL_DATA   I am using the fields
country,std_no,Telephone, in the same structure there is field called CONSNUMBER (I came to know that to upload multiple telephone numbers we have to do some programming on this field, pls correct me if I am wrong)
and there is no other structures for holding telephone numbers

How can I set an validity date for a given vendor?

Hello,
we are currently trying to set a "validity date" for vendors.
Basically, our vendors need to be audited, and are "accepted" for a period of time, beyond which we'd need to re-audit them.
What we'd like the system to do is block use of the vendor if this date was exceeded.
Anyone has an idea on the way to achieve this?
PS: We know that there is a way to do this at the material level, we instead wish to manage it centrally for the vendor
Tx

Hello Nisha,
before doing business with a new vendor for services, our QA group needs to go thru a serie of verifications. We check various things such as insurance, certification,...
Once "approved", the vendor can be utilised by the plant for a certain period of time, after which a "re-audit" is necessary.
What I'd like to implement is a field where the QA group would enter this date, after which the vendor would be automatically blocked for usage.
This would then trigger the "re-audit" followed by the release from QA (who'd re-modify the date with the new one), and so on.
The vendor is not necessarily used for supply chain. Sometimes, it could be for services , maintenance, or other.
Tx for the ideas.

How can I read the complex data for the stand-alone offline time-frequency analyzer, which only accept real data, that is one-column or one row data ?

I have real complex data (i,q data) for the ISAR imaging. I don't have any knowledge of Labview programming. I bought this signal processing toolset to use only stand-alone time-frequency analyzer.

In the LabVIEW functions palette on the block diagram, if you go to Numeric>>Complex you have to VI's that splits a complex number into rectangular or polar components. Click on the help file for those VI's to see the kind of datatypes you can wire to them.
Cyril Bouton
Active LabVIEW Developper

How can i get the pulish data for Price change?

From the rpm-1205-og.pdf document, the RegularPriceChangePublishBatch Batch can formats and stages output of regular price change price events.
but I can't get data from rpm_price_publish_stage table after I run the batch.
if I want generate data into rpm_price_publish_stage, how can I do?
Please help me. thanks.
Daniel

Message was edited by:
user616568

How can I upload text master data for attribute-only Charactertic?

Similar Messages

Maybe you are looking for