How can I use 2 3g usb modems to increase internet speed (connection bonding)?

I live in Bolivia, which if you don't know has the worst internet on planet earth.. i.e. poorest reliability, availability, speed, most expensive, etc..
I currently have a couple of 4g usb modems (which have speeds way slower than 3g.. we're talking 1-200 kbs = ( )... I'm thinking I can probably bond them, or do somekind of proxy thing so that I can browse the web across both of the dongles.. I know that will not equal 2 times the speed.. but anything would help..
Hoping someone here has some ideas.
The modems are both HUWEI and I can connect them via the network preferences pane.
I know this is possible on ubuntu, but I don't really want to set up a linux server virtual or otherwise if I can avoid it.
Many thanks,
George

Hi and Welcome to the Forums!
There is no mechanism to do as you seek...tethering is one-way only.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • How can i use 'find my iphone' if my iphone isnt connected to the internet or is currently out of battery?

    how can i use 'find my iPhone' if it isn't connected to the internet or is currently out of battery?

    You can't. It has to be on and able to connect to a network or it can't transmit its location.

  • Can't use my USB modem "HUAWEI model E156G" on my MACBook Pro

    I'm new to MAC (I used to be a windows user) and I'm a little bit frustrated for not being able to use my USB modem "Huawie E156G" for connecting my new MacBook Pro!
    I followed these steps:
    Got the USB modem drivers found on Huawei site that should support my USB modem model. there were 2 drivers, one for "Intel" and another one for "PowerPC" platforms
    First, I installed the "Intel" version succesfully. According to the steps, I tried to run the installed driver, but I got the following message:
                    "you cant open the app HuaweiDataCardApp because PowerPC app are no longer supported". 
    I repeated the installation procedure using the "PowerPC" version that finished succesfully (without removing the previous installed driver because dont know how to do that). I got the same message when running the driver application:
                     "you cant open the app HuaweiDataCardApp because PowerPC app are no longer supported".
    It would be much appreciated if anyone can help me
    Note: my MAC OS is MAC OS X Lion 10.7.2 (11C74), Processor Intel Core I5
    Thanks

    http://pasamio.com/2011/07/22/getting-your-huawei-modem-working-with-mac-os-x-li on/

  • TS1253 I am connected to internet through  modem. How can I use Time Capsule as a wreless harddrive and connection to USB printer

    Can I use a Time Capsule as a part of my network> I am connected to internet through modem and want to use Time capsule as  a wireless harddrive and wireless connection to usb printer. How can I do that? Please help

    This type of setup is not officially supported by Apple.
    It might be possible to configure the Time Capsule this way, but please take a minute to consider a few things that you may not have thought about, as this is...frankly....the worst possible way that you could configure the Time Capsule.
    Wireless backups will take twice as long as normal wireless.  Why? The signal must make a "double hop".
    Hop "one" would be from your Mac to the wireless router, then the signal must make hop "two" to get back to the Time Capsule.
    In addition to doubling the time for backups to occur, this doubles the chances for an error to occur during a backup.
    The Ethernet ports are not enabled at all on the Time Capsule when it is configured this way, so backup over much faster Ethernet is not possible.
    The USB port is enabled, so assuming that the printer is compatible, it could be configured to connect that way. Keep in mind that only printing is supported. If you have an All-in-One device, advanced functions like scan, copy, maintenenance will not be supported.
    So, do you really want to try this?  There are no guarantees here that things will work at all.

  • How can I use a USB camera with cRIO 9022. Please see my strange problem.

    Hi,
            I would like to use a USB camera with NI cRIO 9022. I used the same USB camera with NI USB 6216 DAQ device and developed a VI(within a PROJECT and outside it). So, It is working fine with NI USB 6216 device when I use the Vision Assistant Express VI and gets detected in its Initialization Window.  Please see JPEG File 3 where I get NO ERROR.
            I am facing a problem when I want to use it with NI cRIO 9022. What exactly I am doing in this case is:
    1) Create a NEW PROJECT
    2) Add Targets and Devices(NI cRIO 9022)
    3) Use the Scan Interface mode
    4) Create a NEW VI under the cRIO 9022 device 
    5) Use a Timed Loop(Synchronized with Scan Engine) for continuous Data Acquisition and Sending from the Analog I/O modules.
    6) Use the Vision Assistant available through the NI Vision Acquisition 2010 Module(I get STUCK HERE! The Express VI opens the Initialization Window, but I don't see the USB camera like in JPEG File 3)
    I am facing difficulties with this HOST COMPUTER, cRIO implementation differences. On my host computer I have the software packages as shown in JPEG File 1, and on my cRIO 9022 as shown in JPEG File 2.
    Can someone guide me how to overcome this and get the USB camera detected when I am using NI cRIO 9022?
    NOTE: If this is a problem with software mismatches on HOST and NI cRIO 9022 device, please see JPEG Files 1 and 2 for available software and Host and cRIO 9022.
    Thanks.
    Amar.
    Attachments:
    NI Vision Acquisition Express Error for NI cRIO 9022.JPG ‏39 KB
    IMAQ and dx Modules Installed on my NI cRIO 9022 hardware(No NI Vision Acquisition 2010 SP1).JPG ‏82 KB
    NI Vision Acquisition Express NO Error for NI cRIO 9022.JPG ‏48 KB

    Only GigE comms are supported on the cRIO Real Time OS. Have a look at the following:
    Machine Vision on NI CompactRIO and Single-Board RIO
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • How can I use a USB 3.0 HDD with PowerBook G4 12" 1 Ghz OS 10.4.11?

    Is it possible to use a USB 3.0 HDD with PowerBook G4 12" 1 Ghz OS 10.4.11? I'm using a HDD with a USB 3.0 tyo 2.0 cable that came with the drive, but it has proven to be extremely unreliable...cloned my system and backed numerous files to 3 partitions on the 1 TB drive, now I can no longer access the drive at all. None off my drive utilities will even show the volumes (TechToolPro, Disk Utility, Disk Warrior, or DataRx). If I plug it into a Windows machine running Windows 7, the drive appears, and is functioning perfectly. I'd just really like to use it with my PB G4, if at all possible...thanks for the help folks...StudioBill

    You need drivers and adaptors which I doubt will work with a G4 Powerbook.
    http://www.lacie.com/more/index.htm?id=10112

  • CAn I use a USB modem?

    I have an imac and an ibook, the imac is not wireless, and runs broadband through a usb modem. is there any way to connect this to the airport for my ibook?
    cheers.

    If you mean to use OS X's "Internet Sharing" feature to share your iMac's USB port with the iMac's AirPort, I believe the answer is, unfortnately, "no" for two reasons:
    - Internet Sharing only works with either the Built-in Ethernet port or AirPort, not the USB port.
    - Internet Sharing works by "sharing" a device's ports in one of the following ways:
    -- Option#1: DSL/Cable modem > (Ethernet cable) > [Ethernet port] Mac#1 [AirPort] > (wireless) > [AirPort] Mac#2
    -- Option#2: Wireless gateway > (wireless) > [AirPort] Mac#1 [Ethernet port] > (Ethernet cable) > [Ethernet port] Mac#2

  • How can I use a USB keyboard with my Macbook Pro?

    My MBP will not recognize my brand new USB keyboard.
    I have tried the keyboard on two other Macbook Air's and it works perfectly.
    My MBP:
    OS X Yosemite
    10.10.1
    Macbook Pro (Retina, 13-inch, Late 2013)
    2.4 GHz Core i5
    8GB 1600 MHz DDR3
    Mac HD
    Graphics Intel Iris 1536 MB
    Thoughts on how I can resolve this issue would be greatly appreciated.
    Thanks,
    Greg

    Brenden,
    Thanks for the reply.
    I've gone your suggestions in detail and the keyboard is still not working.
    From what I can tell this is a known issue with Yosemite.
    https://discussions.apple.com/thread/5676379
    Someone at Apple must be able to figure this one out.
    Greg

  • How can i use 2 usb mics in garageband?

    Hello I am trying to use 2 Headsets for podcasting in Garageband.
    I want them both on different channels.
    I can not figure out how to set this up.
    Can U help me?
    thx

    helaron wrote:
    I am trying to use 2 Headsets for podcasting in Garageband.
    create an aggregate device for them:
    http://www.bulletsandbones.com/GB/Tutorials.html#allaboutaggregatedevices
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    helaron wrote:
     I want them both on different channels.    
    http://www.bulletsandbones.com/GB/Tutorials.html#bsqrecordmultipletracks
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How can I use an USB contacted SC-Card at the time capsule via my iPad!

    I have a camera memory card with an USB-connector. In my holidays I want to store the pictures from the card to the time capsule.
    I want to use the ipad for remote access to the timecapsule. The pictures from the card should be stored at the TC.
    Is this possible with the time capsule and remote acces via iPad? Which app is required?
    Greatings from germany
    Tapsi-MD

    Here is what I would look into.
    Use iCloud and photo stream to upload pictures taken with the iPad.
    Find a remote log in utility, or web based app to then remote to your computer.
    Download the files from photo stream to your time capsule.
    As far as recommending a remote log in utility. I have not experience in that area and would need to do research my self.

  • How can I use a wireless printer and the internet at the same time?

    Hi there, I just installed a wireless printer but to use it I have to click on the Airport icon and select the printer in the 'devices' list. This deselects my connection to my wireless modem. Is there any way I can print and look at the internet at the same time? This does not seem right to me, I print a lot of info from the net and don't want to spend time selecting and waiting for connection back and forth all the time.
    Bo

    I have a Linksys WAG54G2 wireless G router. This router has a Wireless Protected Setup button which I understood would initiate a search for wireless devices and aid setup but it seems to do nothing. I made the mistake of tryig to use the linksys installation disk to access a setup wizard and that just reset my entire network back to factory settings and it took me 4 hours to reconfig my system. Won't be touching that again. It all seems odd, the printer is compatible with the router as far as I can see but I don't know how to get the router to recognise the printer.
    bo

  • How can I use my Apple accoujht in Spain? I am registered in UK but this prevents me logging onto AppleTV, which is annoying, do I need to open a Spanish account too?

    How can I use my AppleTV in Spain?
    I cannot connect to AppleTV to the internet because it says I do not have an account.
    Do I need to create another account in Spain? Or, how do I use a VPN to comnnect the Apple TV?

    Click on your account name in the top right corner of the iTunes store in the iTunes application on your computer, enter your password and click the "view account" button. Navigate to the Apple ID summary where you have the option to "change country or region".
    In order to change your location, you will need a credit card registered to an address in the location you are trying to change to.
    You cannot change your location if you have credit on your account, if you are unable to spend your credit and leave a balance of zero, contact Apple, which you can do through iTunes Store Support.

  • Powermac G5 how can i use new extream 801.11 N wireless?

    anybody knows how can i use my powermac g5 with new high speed 801.11N extream network? hope it support G5.. powerpc i am proud to use original apple powerpc g5 and want to use high tech such as N speed newwork! any help?

    I purchased the new base last week knowing I would never be able to use the N capabilities. We will never be able to buy a compatible PCI card either as our machines include PCI-X, a little used spec.

  • How can i use my pc internet on my iphone 4 (ios7) via usb?

    hallo everyone,
    i want get internet from pc on iphone. how can i use my pc internet on my iphone 4 (ios7) via usb? (not iphone internet on pc). help me please

    That is actually pretty easy.
    Ensure that Bluetooth is enabled on your phone.
    Right mouse click on the Bluetooth system tray icon and select "Add new connection"
    Select your phone ..
    Enter a pincode e.g. 0000
    Enter the same pincode on the phone side as well.
    Click in the "Advanced Modem settings window the "Advanced Modem Settings" button. There should be a string which was auto detected.
    Just confirm the windows until the setup is finished. Open the IE confirm select the just configured DUN connection and browse the internet.
    You need to enter the Advanced modem string manually if it could not be detected. In this case you have to check your ISP website in order to
    find the suitable GPRS or HSDPA string, phone number, username and password for a proper setup. If you enter the wrong data you will encounter
    a connection failed error message.

  • I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

    I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

    As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
    https://discussions.apple.com/community/appletv/appletv

Maybe you are looking for