How can i use 2 usb mics in garageband?

Hello I am trying to use 2 Headsets for podcasting in Garageband.
I want them both on different channels.
I can not figure out how to set this up.
Can U help me?
thx

helaron wrote:
I am trying to use 2 Headsets for podcasting in Garageband.
create an aggregate device for them:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutaggregatedevices
(Let the page FULLY load. The link to your answer is at the top of your screen)
helaron wrote:
I want them both on different channels.
http://www.bulletsandbones.com/GB/Tutorials.html#bsqrecordmultipletracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

Can i use a usb mic input for livestreaming

I'm trying to livestream but theres no mic input on my iMac so could i use a usb-to-mic input for iMac. Thanks

You can use a mic with an 1/8th inch jack in the headphones port. You can also use one of those mics into a 1/8th to USB connector. You can also use a USB mic directly into the USB port.

Can i use a usb mic with an ipad?

can i use a usb mic with an ipad, presumably using the garageband app?

Sorry, I didn't know of this undocumented feature: vazandrew is right, check out http://www.youtube.com/watch?v=cWVXsNJEL0M

How can I use a USB camera with cRIO 9022. Please see my strange problem.

Hi,
I would like to use a USB camera with NI cRIO 9022. I used the same USB camera with NI USB 6216 DAQ device and developed a VI(within a PROJECT and outside it). So, It is working fine with NI USB 6216 device when I use the Vision Assistant Express VI and gets detected in its Initialization Window. Please see JPEG File 3 where I get NO ERROR.
I am facing a problem when I want to use it with NI cRIO 9022. What exactly I am doing in this case is:
1) Create a NEW PROJECT
2) Add Targets and Devices(NI cRIO 9022)
3) Use the Scan Interface mode
4) Create a NEW VI under the cRIO 9022 device
5) Use a Timed Loop(Synchronized with Scan Engine) for continuous Data Acquisition and Sending from the Analog I/O modules.
6) Use the Vision Assistant available through the NI Vision Acquisition 2010 Module(I get STUCK HERE! The Express VI opens the Initialization Window, but I don't see the USB camera like in JPEG File 3)
I am facing difficulties with this HOST COMPUTER, cRIO implementation differences. On my host computer I have the software packages as shown in JPEG File 1, and on my cRIO 9022 as shown in JPEG File 2.
Can someone guide me how to overcome this and get the USB camera detected when I am using NI cRIO 9022?
NOTE: If this is a problem with software mismatches on HOST and NI cRIO 9022 device, please see JPEG Files 1 and 2 for available software and Host and cRIO 9022.
Thanks.
Amar.
Attachments:
NI Vision Acquisition Express Error for NI cRIO 9022.JPG ‏39 KB
IMAQ and dx Modules Installed on my NI cRIO 9022 hardware(No NI Vision Acquisition 2010 SP1).JPG ‏82 KB
NI Vision Acquisition Express NO Error for NI cRIO 9022.JPG ‏48 KB

Only GigE comms are supported on the cRIO Real Time OS. Have a look at the following:
Machine Vision on NI CompactRIO and Single-Board RIO
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

How can I use an external mic to record meeting audio with quicktime player

I'm trying to use a SoundTech CM-1000 conference mic to record meetings at a conference I am running.
I'm using Quicktime for the recordings.
The SoundTech CM-1000 conference mic does not transmit any sound when connected to the Audio-in plug on my MacBook Pro.
Does my MacBook Pro require external mics that are also powered - connected via a usb port rather than, or at least in addition to, the audio-in plug, for instance?
What's happening here?
Steve

Macbook Pro does not have a microphone input
You have two options:
1 buy a USB mic and connect to a USB port
2 buy a small very cheap sound mixer that has 3.5 mic level input and a line level out put
something like this:
DAP Audio

How can I use a USB 3.0 HDD with PowerBook G4 12" 1 Ghz OS 10.4.11?

Is it possible to use a USB 3.0 HDD with PowerBook G4 12" 1 Ghz OS 10.4.11? I'm using a HDD with a USB 3.0 tyo 2.0 cable that came with the drive, but it has proven to be extremely unreliable...cloned my system and backed numerous files to 3 partitions on the 1 TB drive, now I can no longer access the drive at all. None off my drive utilities will even show the volumes (TechToolPro, Disk Utility, Disk Warrior, or DataRx). If I plug it into a Windows machine running Windows 7, the drive appears, and is functioning perfectly. I'd just really like to use it with my PB G4, if at all possible...thanks for the help folks...StudioBill

You need drivers and adaptors which I doubt will work with a G4 Powerbook.
http://www.lacie.com/more/index.htm?id=10112

How can I use a USB keyboard with my Macbook Pro?

My MBP will not recognize my brand new USB keyboard.
I have tried the keyboard on two other Macbook Air's and it works perfectly.
My MBP:
OS X Yosemite
10.10.1
Macbook Pro (Retina, 13-inch, Late 2013)
2.4 GHz Core i5
8GB 1600 MHz DDR3
Mac HD
Graphics Intel Iris 1536 MB
Thoughts on how I can resolve this issue would be greatly appreciated.
Thanks,
Greg

Brenden,
Thanks for the reply.
I've gone your suggestions in detail and the keyboard is still not working.
From what I can tell this is a known issue with Yosemite.
https://discussions.apple.com/thread/5676379
Someone at Apple must be able to figure this one out.
Greg

How can I use an USB contacted SC-Card at the time capsule via my iPad!

I have a camera memory card with an USB-connector. In my holidays I want to store the pictures from the card to the time capsule.
I want to use the ipad for remote access to the timecapsule. The pictures from the card should be stored at the TC.
Is this possible with the time capsule and remote acces via iPad? Which app is required?
Greatings from germany
Tapsi-MD

Here is what I would look into.
Use iCloud and photo stream to upload pictures taken with the iPad.
Find a remote log in utility, or web based app to then remote to your computer.
Download the files from photo stream to your time capsule.
As far as recommending a remote log in utility. I have not experience in that area and would need to do research my self.

Can I use multiple USB mics with Audition?

I have a couple Blue Yeti mics and would like to find a program that allows me to use 3 of them at the same time all recording and allowing their built in headphones to work as a monitor for all channels for a podcast setting. I don't have an advanced soundcard, I have a quad core PC with 2g ram running Vista. So does this work as is if I buy the program or what do I need to make this work if not? Any help is appreciated.

ASIO4ALL will allow you access to all 3 mics in Audition.

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

How can i use in the same time input line and mic to recorder in several track whit SONAR

I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english

LIMACAR wrote:
How can i use in the same time input line and mic to recorder in several track whit SONAR 4. I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english
Depending on which soundcard you have there, but if your card is capable for
ASIO -> activate I/O drivers on Sonar/Options/Audio/Drivers -tab (mic/line sources should be listed there --> activate) and select the mic or/and Line sources on tracks "I" - dialog
WDM/KS -> use the Surround Mixer or windows recording controls for recording source selection (mic should be listed there)
MME32 - > same w/ WDM/KS
If you use Asio4All --> same w/ WDM/KS & MME32
No mic and line source simultaenously w/ WDM/KS and MME32.
You perhaps be able to do this w/ kX drivers.
jutapa
ADDED:
You can also install modded version of Audigy 2 drivers/software but I have never done this w/ Li've! 5. so I can't be sure if you get ASIO support for your card.
Here are the instruction --> http://www.tech-pc.co.uk/audigy-2.php
jutapaMessage Edited by jutapa on 05-25-2006 02:48 PM

How can I use the iPhone 4s as a usb drive?

How can I use the iPhone 4s as a usb drive?

I'm not sure about the original iPhone, I didn't have one, but the iPhone 3G did not have a disk mode feature.

How can I use a firewire hard drive on a new Macbook with one USB-C only?

How can I use a firewire hard drive on a new MacBook with only one USB-C?

kaz-k is correct about FireWire not being supported by any possible connector or adaptor to USB-C and never will. However, there is no such thing as a FireWire Hard Drive. There are only SATA (or if it is a really old one, ATA,) drives in a FireWire enclosure. If you can remove the drive from the case/enclosure - bust it open somehow if it is a glued-up unit - then the drive can be placed into a regular USB3 enclosure. Then it can connect to the new MacBook via any one of the adaptors Apple sells.

How can I use USB interface in Labview?

Hi.
Does labview allow to USB interface?
I have been seen allowing GPIB and RS232.
I'm beginer at Labview and wanna use USB interface for my target system and pc.
I wanna know how to labview interfaces from target system to pc.
And if Labview doesn't provide USB interface module, how can I use USB?
Is using a USB at Labview hard to beginer?
Plz, answer to my quetion.
sorry, my English is very poor.
thx for reading my article.

You can access devices connected to the USB port, but not in the same way as you would a GPIB or RS232 device. There are no USB drivers like there is VISA for GPIB or serial. Rather devices that plug into the USB appear to the systen as some sort of standard resource like a printer, disk drive or IO board. LabVIEW then interacts with these devices as it would any other device of the same type.Look at it this way, if you have a USB daq device you will access it through MAX the same as if it were a plugin card. Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How can i use 2 usb mics in garageband?

Similar Messages

Maybe you are looking for