How can I use a desktop local ISP connection to connect BB to internet?
I am traveling out of the US with my Tour 9630 and have no wireless service provider for data services in my present location. However, I have access to a local desktop machine with standard internet service through an ISP. Is there a way to connect the BB to the internet through the local machine, using the blackberry USB connection cable? That is, the exact opposite of tethering... Or, is it possible after establishing a local Bluetooth connection between BB and desktop?
Hi and Welcome to the Forums!
There is no mechanism to do as you seek...tethering is one-way only.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
How can I use the desktop gmail instead of mobile?
How can I use the desktop gmail on iPad2 -
instead of the mobile version or app?Scroll all the way to the bottom of the screen in the mobile site. There is (or at least there used to be) a link to the standard site.
Really, though, the experience through the Gmail app is much better.
Best of luck. -
How can i use my iPhone 4 and connect via bluetooth with my macpro
how can i use my iPhone 4 and connect via bluetooth with my macpro
The only way that you can connect your iPhone to the mac is to use it for a "Wi-fi hotspot" meaning that you can use the celluar connectivity of your phone to connect your computer to the interent.
Do you mean a MacBook Pro of the desktop MacPro? -
How can I use Vibo 3G(Taiwan) SIM card to enable new Ipad internet tethering?
How can I use Vibo 3G(Taiwan) SIM card to enable new Ipad internet tethering?
Eric Martens1 wrote:
What is the reason for Apple to skip this function? In fact, I feel pretty uncomfortable with this decision, it hinders me from using the iPad in a useful way. What is the reason to allow tethering on an iPhone and not on an iPad?
We are all just your fellow users. No one here is going to be able to answer those questions for you. Bottom line is, for whatever reaons, you cannot use your iPad as a mobile hotspot. If that's the reason why you bought it, you need to either return it or sell it.
Submit your feedback to Apple here:
http://www.apple.com/feedback
Many people find that it's still a useful device even without that feature. -
The computer I use for Itunes (my laptop) only has XP so I can't use ICloud:(
I have a desktop that operates using with Vista.
I downloaded 10.5 and sought to sync my two iphones and two ipads with the desktop in order to use ICloud. However I got warning messages that if I synced with this computer that had none of my extensive library of apps, music, podcasts, etc. would be on it, I would lose it all.
I did authorize the computer. I knew enough to do that but am terrified that I will lose everything that I have accumulated and still won't be able to use ICloud.
Isn't there a way to do this? Shift my library FROM my devices to the desktop?
ThanksThis is a tedious solution, which is stupid! And some users report an inability to reauthorize a computer after an "en masse” deauthorization. I can’t believe Apple doesn’t provide a list or menu to find out which computers you’ve authorized! Obviously, APPLE knows (or else they couldn’t tell us how many computers we have authorized)--so why can’t they give us access to that information about our own computers??!!!
And for an already-authorized computer with a hard drive that’s since been replaced and upgraded from Mavericks to Yosemite, would it be recognized as a “new computer” and require authorization? Would its previous incarnation (i.e., with the old hard drive and OS) be considered a separate computer? Some users report they can’t authorize a computer after an OS upgrade because of that. Can’t believe we have to do such a bass-ackwards kludge! -
How can I use Data Source Explorer to connect soap service with my work manager project?
Hello,
I am new in Agentry and I want to Consume soap service in work manager project.For that I add my service in data source explorer but I dont have any Idea that how can I go further in that to use this service in my project.Are you consuming OData service or SOAP service ? Your heading says something but looking at screen it is OData service.
I have not worked on OData service in Agentry but hopefully you can figure out rest of the steps:-
Here are some high level steps you can follow depending on what your trying to do.
1. Open "Data Source Explorer" view->Eclipse, select "Window/Show View/Other->"Data Management/Data Source Explorer"
2. On "Data Source Explorer" view, ->"OData Connections"->right click and select "New...
3. Enter name of the connection profile.
4. Enter Service URI of in OData Connection Details
5. After "Test Connection", press "Finish" or click "Next" to view Summary.
6. Right click "Yourproject" node under "OData Connection", select connection. You will see "Entities"
7. Expand "ODataEntities", right click "Entityset", select "Agentry: Connector Studio\Object Wizard for OData".
8. Select a module to add odata connection, click "Next"; and click "Next"; and click "Next"
9. Check "Add", "Edit" and "Delete" on "Transaction Selection" screen.
10. Create your own screenset and platform as required.
11. Test the changes.
Thanks
Manju -
I no longer have any disks for my airport extreme (its pre-time capsule)... how can I connect my windows machine to it in order to get to the internet?
You can directly download the AirPort Utility for Windows from Apple Support here.
Once the AirPort Extreme is properly configured for Internet access you can connect your PC to the Extreme either by a wired or wireless connection. -
How can I use an existing local svn workspace with SQL Developer?
I have a couple directories of files on my local drive that hold my current working files from the svn repository. I use both TortoiseSVN and Cygwin to keep the local files in sync with the repository, depending on my mood. I have created a connection to the repository in SQL Developer, and I can browse the repository just fine. My goal is to have SQL Developer play nice with the local files, just like the other two Subversion clients do. Is there a way I can inform SQL Developer of my local files without re-importing them through the Versioning -> Import... wizard, without changing anything (or putting anything at risk) in the local workspace?
Thanks in advance for your help -
WallyThen can her computer be authorized to both accounts?
Absolutely. You can authorize any given computer to up to five iTunes Store accounts.
If purchases are made on her account, to a computer authorized to my account, can I put those songs on my iPod?
If you connect your iPod to her computer, yes. Tracks download only to the computer from which they're purchased, regardless of which iTunes Store account is used for the purchase. Or you could copy the tracks from her computer to yours and then authorize your computer to her iTunes Store account. But that's sort of defeating the original purpose, it would seem to me.
is it better to buy music through Amazon downloads and/or actually purchasing CDs to avoid the security features iTunes puts on its music?
That's certainly an option. If it's an entire album I want, I buy CDs. That way I can import them at the quality I want and to whichever of my systems I want. Amazon or one of the other download stores that offer tracks as MP3 are also an option, though for me download stores are best when you just want a couple of tracks off a given CD. -
I downgraded my HP Pavilion p7-1534 desktop computer from Windows 8 to Windows 7 today with a Windows 7 Home Premium disk I purchased. I checked online first to see everything I'd need to do, including backing up all my personal files and information to an external hard drive and downloading all my drivers to a USB drive. I followed online instructions and went into the UEFI bios settings and disabled Fast Boot and Secure Boot and enabled Legacy mode. Windows 7 finally loaded and it comes up. However, my PC now no longer recognizes that I have several USB drives so I can't load my drivers. Also, I can't connect to my MediaCom cable Internet. Does anyone know what I did wrong and what I can do to fix my PC?
Hi,
Please install chipset driver including USB:
http://support.amd.com/en-us/download/chipset?os=Windows%207
Wireless driver:
http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56617.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
How can I use applet to get the desktop image of client
hi,I have a question to ask u.
How can I use applet to get the desktop image of client? Now I develop a web application and want user in the client to get his current image of the screen.And then save as a picture of jpeg format ,then upload it to the server?
I have done an application to get the screen image and do upload file to server in a servlet with the http protocal.Since the desktop image is on the client's local hard drive, you'll need to look at trusted applets first.
-
How can I use Local SPAN with RSPAN ??
How can I use Local SPAN with RSPAN ??
I want to mirror traffics from ISP-A and ISP-B to Anomaly-detector module.
so I had configured like this...
C6500-A
vlan 1000
name RSPAN
remote-span
monitor session 10 source interface Gi5/1 - 2 rx
monitor session 10 destination remote vlan 1000
monitor session 20 destination anomaly-detector-module 3 data-port 1
monitor session 20 source remote vlan 1000
interface GigabitEthernet1/13
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1000
switchport mode trunk
no ip address
C6500-B
vlan 1000
name RSPAN
remote-span
monitor session 10 source interface Gi5/1 - 2 rx
monitor session 10 destination remote vlan 1000
interface GigabitEthernet1/13
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1000
switchport mode trunk
no ip address
end
but it was not working..
it wasn't any change of input packet hit count when
I'd enter a command 'show anomaly-detector module 3 data-port 1 traffic'
was upper configuration wrong..?
Can I use VACL configuration ?try to change "monitor session 10 destination remote vlan 1000 " to "monitor session 10 destination anomaly-detector-module 3 data-port 1 " on C6500-A
-
Using a Mac with Mavericks how can i change a desktop folder' name?
using a Mac with Mavericks how can i change a desktop folder's name?
click on the folder, then click on the name again, you'll see the name field changes so you can rename it
-
How can I use wget, cron and Automator to periodically pull an image from a URL (which is dynamically updated - like a weather map, say - to local storage, and then update a Keynote slide with that image, automatically?
Any particular reason for those specific technologies? wget does not exist on a mac, although you can nstall it I guess. OS X has curl installed which should do pretty much anything you want to do with wget. cron is being replaced by launchd, although cron still exists on mountain lion.
As far as I can tell from automator all the standard 'actions' to access keynote available to it require keynote to be open and running, but does not provide a function to actually open it. So I think you will have to write some applescript, as a minimum to open and quit keynote. I notice that the keynote actions are mostly circa 2005 an wonder if they would even work.
Under utilities in automator 'actions' there is a capability to add applescripts as part of the workflow.
Also, note that cron is being dprecated by Apple and replaced by launchd. that said cron is stil on my mountain lion instalation.
This entry at stackoverflow shows use of cron with curl to get web urls. http://stackoverflow.com/questions/1683620/getting-started-with-cronjobs-on-a-ma c
If I have any time I may try and get this to work as it is quite interesting and new to me. But otherwise, good luck. -
How can I use Automator to extract specific Data from a text file?
I have several hundred text files that contain a bunch of information. I only need six values from each file and ideally I need them as columns in an excel file.
How can I use Automator to extract specific Data from the text files and either create a new text file or excel file with the info? I have looked all over but can't find a solution. If anyone could please help I would be eternally grateful!!! If there is another, better solution than automator, please let me know!
Example of File Contents:
Link Time =
DD/MMM/YYYY
Random
Text
161 179
bytes of CODE memory (+ 68 range fill )
16 789
bytes of DATA memory (+ 59 absolute )
1 875
bytes of XDATA memory (+ 1 855 absolute )
90 783
bytes of FARCODE memory
What I would like to have as a final file:
EXCEL COLUMN1
Column 2
Column3
Column4
Column5
Column6
MM/DD/YYYY
filename1
161179
16789
1875
90783
MM/DD/YYYY
filename2
xxxxxx
xxxxx
xxxx
xxxxx
MM/DD/YYYY
filename3
xxxxxx
xxxxx
xxxx
xxxxx
Is this possible? I can't imagine having to go through each and every file one by one. Please help!!!Hello
You may try the following AppleScript script. It will ask you to choose a root folder where to start searching for *.map files and then create a CSV file named "out.csv" on desktop which you may import to Excel.
set f to (choose folder with prompt "Choose the root folder to start searching")'s POSIX path
if f ends with "/" then set f to f's text 1 thru -2
do shell script "/usr/bin/perl -CSDA -w <<'EOF' - " & f's quoted form & " > ~/Desktop/out.csv
use strict;
use open IN => ':crlf';
chdir $ARGV[0] or die qq($!);
local $/ = qq(\\0);
my @ff = map {chomp; $_} qx(find . -type f -iname '*.map' -print0);
local $/ = qq(\\n);
# CSV spec
# - record separator is CRLF
# - field separator is comma
# - every field is quoted
# - text encoding is UTF-8
local $\\ = qq(\\015\\012); # CRLF
local $, = qq(,); # COMMA
# print column header row
my @dd = ('column 1', 'column 2', 'column 3', 'column 4', 'column 5', 'column 6');
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
# print data row per each file
while (@ff) {
my $f = shift @ff; # file path
if ( ! open(IN, '<', $f) ) {
warn qq(Failed to open $f: $!);
next;
$f =~ s%^.*/%%og; # file name
@dd = ('', $f, '', '', '', '');
while (<IN>) {
chomp;
$dd[0] = \"$2/$1/$3\" if m%Link Time\\s+=\\s+([0-9]{2})/([0-9]{2})/([0-9]{4})%o;
($dd[2] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of CODE\\s/o;
($dd[3] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of DATA\\s/o;
($dd[4] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of XDATA\\s/o;
($dd[5] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of FARCODE\\s/o;
last unless grep { /^$/ } @dd;
close IN;
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
EOF
Hope this may help,
H -
How can I use photos in FCEHD?
How can I use photos in FCEHD? (I'm new to the thing - done just one video project so far).
When I imported photos from Aperture (first into the folder on desktop, and then from desktop to the Browser in FCEHD3.5, the photos have a black bar/a gray space above and below, and they appear too wide a bit on the right side, as if coming out of the Canvas'frame.
Is it a way to fit them into the 4:3 format, so they fit the whole screen (BTW - what view I should have set for Viewer and Canvas? A 100% or "Fit The Screen" view?).
Also: Is there a way to enter the same Transition in between all of my photos in the Timeline? (if so - how?)Re the Canvas window ... before exporting your sequence, rendering, etc it should be set to Fit to Window, this can avoid problems
In FCE you can't set your own default transition. It is always the Cross Dissolve. If that is the one you want to use, when you drop your pics onto the timeline you can drag them over to Overwrite with Transition or hit Shift-F10. If you want to use multiple occurances of another trans, apply it once, double click to put it in the Viewer then just drop that down onto your clips
I haven't used Aperture but I think that how they appear in the timeline depends upon the size they are created in. Search this forum, there is plenty of info about that. Generally Final Cut sizes the pics to fit into your video sequence. Put a pic in the timeline, click it, select Edit>Remove Attributes and from the submenu select Motion, see what happens
Maybe you are looking for
-
Spot chanel white not visible in ai when psd file is placed (CS6)
TIA for the help. Hopefully somebody here can point me in the right direction. My appologies if this was covered already, but I've searched left and right without any luck. We use spot channels in PS and as of CS5 have to print out of Illustrator in
-
I am having issues with the Toshiba dynadock U (PA3575U-1PRP. When I installing the drivers for the docking station and click on the Internet, it takes forever for the homepage to appear. When I turn off the Windows Firewall, that internet works gr
-
Hi How to caliculation depreciation for an Asset used with Single/Double shifts. How to defice depreciation for such an incident. Pl guide me accordingly Thanks Narayana
-
Qosmio G10-133 Drivers for Other Devices
Hi peeps. Yes I know this is an old laptop. I recently had to re-install the software due to hard drive failure. I always have problems. Toshiba installed a new motherboard years ago with the upgraded video chipset Nvidia Geforce Go 6600. Since then
-
How can we connect to a DB and fire DB queries in JCAPS Please help me