How can I use a different web page in the tabs

I'm getting this bing thing and I cant remove it and change it. Ive tried going to "about:config" and changing the browser url and keyword.URL but it wont change.. Very unhappy and thinking its time for a change.

There's a hidden setting for new tabs. It is quick to change, even though it takes a long time to explain it.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''newtab''' and pause while the list is filtered
(3) Double-click the '''browser.newtab.url''' preference and enter your preferred page:
* ''Page thumbnails (default)'' => about:newtab
* ''Blank tab'' => about:blank
* ''Built-in Firefox home page'' => about:home
* ''Any other page'' => full URL to the page
Press Ctrl+t to open a new tab and verify that it worked. Fixed?
Two gotchas:
* If Firefox ignores the setting, one of your extensions may be overriding it. You can review, disable, and/or remove extensions on the add-ons page:<br><br>orange Firefox button (or Tools menu) > Add-ons > ''in the left column click'' Extensions
* If the change works but at the next startup is back to Google, you might have a user.js file in your personal Firefox settings folder (your Firefox profile folder). This article describes how to track down and remove the file: [[How to fix preferences that won't save]].
Any luck?

Similar Messages

Can you use a different web page generator with iweb?

I have created website in Sandvox & want to know if there is a way to import the htm files into iweb so I can publish the website with .Mac

To force Sandvox to publish to the iWeb folder instead of HomePage without the need of a domain do as follows.
Read the instructions in [this page|http://docs.karelia.com/z/Personal.MacDomains.html].
You do not need a domain!!! Think of a non-existent fake domain.
Just follow the steps.
Sandvox will tell you that there is no domain.
Quit Sandvox and open the plist in the Propertlist Editor (part of Xcode).
~/Library/Preference/com.karelia.Sandvox.plist
Delete the line with the fake domain and save the file.
Start Sandvox.
Republish the lot. Sandvox will now publish to a folder in
~/iDisk/Web/Sites/
No garantees.
Before: http://homepage.mac.com/wyodor/Sandvox/
After: http://web.mac.com/wyodor/Sandvox/
Message was edited by: Wyodor

How can I use a different Apple ID withthe App Store?

When I access the App Store from my iPhone 3G it asks me to enter the password for an Apple ID.
How can I use a different Apple ID with the App Store?

It will use the account you are currently signed into with iTunes when you synced. So in iTunes, change your account, then sync. Then the iPhone will use that one.

How can i use my custom login page in a custom partner application ?

Dear All,
I'm trying to customize a login page displayed other than the default sso login page
by submiting my form to the regular pl/sql procedure : "PORTAL.wwptl_login.login_url"
but i tried to type the requested partner application url in the browser i got the sso
login page other than my custom login page. So, How can i use my custom login page in a custom partner application ?
Regards,
Mohammed Amin
[email protected]

I cannot begin to express my level of frustration. I have been trying to use the composition widget light box display for some time now. I drag the widget to my document. The default widget has three small trigger boxes and a large area made up of a forward and backward button, a background, a text box and a frame for your image.
My steps have been …
I click on the little trigger box.
I click on the frame that holds the main image.
I go to the fill menu and browse my computer for my image and then click OK.
IT shows up on my screen. Yay
I attempt to continue using the next two trigger boxes provided in the widget.
After that, I add more by clicking on the little plus sign.
This is where all heck breaks loose.
Every single time I attempt to add thumbnails, something messes up. When I go to preview, either not all of my main images show up, or it starts with the wrong one, or some are missing. I have looked and looked for help on this and the only thing I can find is how easy it is to create a great portfolio lightbox display. But as we know, that only works when your thumbnails are the same image as the images in your lightbox. If you want something different, you have to use the composition wizard. I am finding it extremely difficult and confusing to customize.
Is there an exact sequence you need to use to add images to the slideshow? I am my wits end.

How can I use OmniPortlet and Web Clipping Portlet?

How can I use OmniPortlet and Web Clipping Portlet?

You find information on OmniPortlet and Web Clipping in the Portal Developer's Guide.
o Building Portlets with OmniPortlet
o Building Content-Based Portlets with Web Clipping
Peter

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

How can i use 2 different apple ids for imessage and facetime on 1 ipad?

How can i use 2 different apple ids for imessage and facetime on 1 ipad?

Do you mean can you use one Apple ID for FaceTime and one for iMessage? You should be able to. Or, do you mean, can you log into iMessage (or FaceTime) with two Apple IDs at once? No.

How can I delete an old web page ??

How can I delete an old web page ?? I have created a web page some time ago and now I want to delete it but i do not know how to do it: can anyone help me ?

Delete the web page where it is published.
If it is published to MobileMe, then you need to log into MobileMe and go to your iDisk or mount it on your desktop and then delete it from your Web/sites folder.
If you have published to a server, then you'll need to download Cyberduck, Filezilla or Transmit - all dedicated ftp programmes to connect with your host/server and then delete your old files from the server.
It really is not hard.

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

How can I make photos on web page enlarge with mouse-over?

How can I make photos on web page enlarge with mouse-over?

There's a couple of recent topics which mention MagicZoom and JQZoom...
https://discussions.apple.com/message/17438064#17438064
https://discussions.apple.com/message/17440847#17440847
A very simple method is shown here...
https://discussions.apple.com/message/17440847#17440847

How can a customer edit a web page that I have made?

How can a customer edit a web page that I have made? The customer should edit the text or pictures by himself. Is this possible?

First you can search in this forum "in browser editing".
Second you may be interested in this video:
http://tv.adobe.com/de/watch/designtools-in-der-creative-cloud/bearbeitung-im-browser-in-a dobe-muse/

HT204053 If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

Each user account may have its own Apple ID.

I want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone

i want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone!

Download AirPlayer for Mac - Transforms your Mac into an AirPlay-compatible display. MacUpdate.com

How can I use word count without it counting the words in the end notes by default?

How can I use word count without it counting the words in the end?
Now I have to highlight the text to get a count.

I don't think that is possible, it does what it does.
Peter

How can I use my TimeMachine to back up the external hard drive

How can I use my TimeMachine to back up the external hard drive that is attached to my TimeMachine? I have the external drive attached to my TimeMachine via the USB port and want my TimeMachine to back up the files on the external drive, as it does for the files on my computer. How do I do that?

https://discussions.apple.com/message/16276201#16276201

How can I use a different web page in the tabs

Similar Messages

Maybe you are looking for