How can I use a existing USB Driver in NI VISA 3.0

Hello,
we have an ftdi USB driver for our measurement device.
The FTD2XX.sys is registred in C:\WINNT\system32\drivers
Also I have a FTD2XX.dll and an FTD2XX.inf file.
But I don´t know how can I register them in NI LabView or VISA.
Have I to do a new *.inf file for VISA?
Thank you
Cedric

You can either use the manufacturer-supplied driver or NI-VISA to control your USB device but not both. If you have installed your device, each time you plug it in the FTD2XX.inf will associate your device with FTD2XX.sys. Then, you can use FTD2XX.dll to talk to your device using the call library function node. The DLL usually contains a whole bunch of useful functions that someone else already designed to talk to your device. This is the easier route and I would recommend it if you already have the DLL and the installed driver.
The second method would be to uninstall or disable the driver for your device and create an .inf file with NI-VISA Driver development wiazard. This .inf file will tell Windows to use VISA as your device driver. You will, however need the vendor and product ID of the device to use VISA as your driver. The details of this are outlined in the NI document "Using VISA 3.0 to control your USB device."
The drawback of this method is that VISA is just an API to talk to your device and you have to implement the communication protocol to talk to your device. This might take some time to do.
This is why I recommend the first method. Someone else already implemented the driver for your and you just have to use the functions from the dll to implement your application.
Hope this helps.

Similar Messages

  • How can I use an external USB drive on my Macmini with Boot Camp and Lion/Windows 7?

    I have a MacMini (Last model with a disk drive). The Mini has Lion and Windows 7 installed using Boot Camp. I want to attach a 350GB, USB, HP Personal Storage Device (Hard Drive) to the computer and be able to use it in both Lion and Windows 7 mode. The USB drive is formatted for Windows 7. I only want to use it for storage and back-up purposes for both operating systems. It would be nice if I could access the total disk from either system without having to reboot to change operating systems to view Windows 7 files and reboot again to view Lion files. Can anyone offer any guidance or any informational websites to help me? Thank you for any help!!

    Yes, you’ll be able to do that.
    (116841)

  • How can I use a firewire hard drive on a new Macbook with one USB-C only?

    How can I use a firewire hard drive on a new MacBook with only one USB-C?

    kaz-k is correct about FireWire not being supported by any possible connector or adaptor to USB-C and never will.  However, there is no such thing as a FireWire Hard Drive.  There are only SATA (or if it is a really old one, ATA,) drives in a FireWire enclosure.  If you can remove the drive from the case/enclosure - bust it open somehow if it is a glued-up unit - then the drive can be placed into a regular USB3 enclosure. Then it can connect to the new MacBook via any one of the adaptors Apple sells.

  • How can i download a mobile usb driver?

    My hard drive recently crashed and I have had to redownload everything. I have downloaded itunes, but when I try and hook up my ipod it says I need an apple mobile USB driver. How can I download that driver?

    You can either use the manufacturer-supplied driver or NI-VISA to control your USB device but not both. If you have installed your device, each time you plug it in the FTD2XX.inf will associate your device with FTD2XX.sys. Then, you can use FTD2XX.dll to talk to your device using the call library function node. The DLL usually contains a whole bunch of useful functions that someone else already designed to talk to your device. This is the easier route and I would recommend it if you already have the DLL and the installed driver.
    The second method would be to uninstall or disable the driver for your device and create an .inf file with NI-VISA Driver development wiazard. This .inf file will tell Windows to use VISA as your device driver. You will, however need the vendor and product ID of the device to use VISA as your driver. The details of this are outlined in the NI document "Using VISA 3.0 to control your USB device."
    The drawback of this method is that VISA is just an API to talk to your device and you have to implement the communication protocol to talk to your device. This might take some time to do.
    This is why I recommend the first method. Someone else already implemented the driver for your and you just have to use the functions from the dll to implement your application.
    Hope this helps.

  • How can I use my external hard drive for my iphoto instead of my mac book pro memory?

    i don't know if this question has been asked before: how can I use my external hard drive for my iphoto instead of my mac book pro memory? just like itunes all my song are save on my external hard drive. make sense?

    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • How can I use an external hard drive to both back up and free up storage on my macbook?

    I've used a hard drive to back up my 2012 Macbook Pro via Time Machine, but I'm not sure how to use it as external storage to move things like video and music off of my Mac to free up memory and then how to move the same things from the hard drive on to other devices like my iPad or iPhone.  For instance, I have a ton of movies and would like to store most of them on an external hard drive so that they aren't taking up all of my memory on my Mac, but want to be able to move them easily back onto my phone or iPad.  Also, can I use the same hard drive to both back up my computer and use it for external storage?  If so, how do I do that?

    Always use two drives for this: one for backup; the other for storage. Don't mix the two uses on one drive. There's a greater risk of data lost without that redundancy.
    If you plan to backup using Time Machine, then be sure the backup drive's capacity is at least twice that of the drive you are backing up.

  • How can I use my external hard drive with my new (firewire-less) MacBook?

    I read in another post that the available firewire adapters don't work for external hard drives. So how can I get my music, etc. off my external hard drive and onto my new computer?

    Like the second or third one in this picture?
    http://upload.wikimedia.org/wikipedia/commons/f/f4/USBtypes2.jpg
    They are USB ports - the smaller one is a mini-USB (like you might find on a digital camera) and the third is a USB-B port (such as on a printer). You can use a mini or standard USB cable (depending on the port) to connect it to your Macbook.
    Matt

  • How can I connect my existing firewire drives to the "new" Macbook pro

    I'm thinking about getting a new Macbook Pro, to take on the road.
    I already have four external drives with firewire and USB 2.0 ports.
    After I looked at the new machine I noticed it only had USB 3.0 and Thunderbolt ports.
    I dont see any Firewire to Thunderbolt technology out there nor do I see any  USB3.0 to anything technology. How can I connect my drives to the new system?

    You can use the USB3 connections for USB2.  That's downward compatible.  Just runs at USB2 speed.
    Just this week apple announced a couple of TB adapters, TB-to-ethernet and TB-to-firewire.  But the FW adapter is not at the apple store as yet (at least at the time I am posting this).

  • How can I boot linux from usb drive and/or dvd drive on a windows 8 laptop please?

    Hi all,
    Could someone describe how to set my windows 8 laptop to boot linux from usb and or dvd drive step by step please? I have HP laptop. Thank you.

    http://www.cisco.com/en/US/prod/collateral/modules/ps6247/prod_qas0900aecd80232483.html
         Q. What sizes of USB Flash sticks are supported?
         A. USB Flash sticks are supported in 64, 128, and 256 MB sizes. No other sizes are supported.
         Q. Can I use any USB memory stick for this application?
         A. No. Only Cisco USB memory sticks are supported.
    Q. Can I boot an image directly from the USB Flash module?
    A. Yes. USB drivers have been added to rommon, starting with version 12.4(13r)
         Q. Can I format the USB Flash module on the router?
    A. Yes. You can format the module on either a router or a PC. You must  specify "FAT16 file system" as the file system for the PC format process  to use.
    If your setup satisfies above conditions you can get the router to boot up with the IOS on the USB flash
    If you are in ROMMON mode, use 'dev' to find out the name of the USB Flash (should be usbflash0).
    set BOOT=usbflash0:
    If you are in the router,
    boot system flash usbflash0:

  • Should I use an existing usb driver or should I create my own?

    We are developing a custom piece of hardware that uses a TI6250 chip to provide an USB communication channel. I read through the web reference http://zone.ni.com/devzone/conceptd.nsf/webmain/67​92BAB18242082786256DD7006B6416?opendocument that seems to imply that I don't want to use any existing drivers but I need to create my own using the wizard.
    I'm new to USB so I'm trying to get started off right so any advice for a novice would be appreciated.
    Thanks,
    Brad

    What the wizard creates is a .inf file that contains manufacturer id, model number, etc. that defines the USB device that you want to talk to. On your custom board, you have to implement these settings in eeprom/flash. The TI chip driver tells your board pnly how to manage USB communication. You would also need to implement a means to interpret commands received into the hardware functions that are on your board. For example, if the text "RST" is received, intrepret that as a reset and set board level registers to do that. The LabVIEW driver would include a Reset VI. This VI would do a VISA Write with the text "RST". So what we're talking about is actually several different levels of drivers and code - VISA, the .inf file, the embedded code on your custom board, and LabVIEW VIs.

  • How can I use my external hard drive for storage?

    I just bought a new external hard drive, the My Book Premium Edition II. I have totally spent all of the memory on my hard drive and want to transfer my music to my new hard drive and use it as my iTunes directory, but everytime I try to move my music files, it tells me I cannot because the drive cannot be formatted. On the box it says Mac OSX compatible but when I open up the Get Info it says, Format: Windows NT Filesystem. It is 1Tb. How can I get this to work????? Help please.

    jbsilliman
    That's because Macs can read from NT FS drives, but can't write to them. Microsoft have maintained NTFS as a closed system. To use the drive you'll need to reformat it to something the Mac can read and write to.
    Regards
    TD

  • How can I boot Cisco1841 with USB Drive instead of CF?

    Hello
    I need to boot Cisco1841 with USB Drive instead of Compact Flash but I don't know what should I do.
    I heard I need to format USB Drive with FAT and need to save IOS on the USB Drive.
    Before boot, Need to set config register ? I am not sure which parameter should I set config register in detail.
    Please let me know if there is URL describing thease steps from the beginning.

    http://www.cisco.com/en/US/prod/collateral/modules/ps6247/prod_qas0900aecd80232483.html
         Q. What sizes of USB Flash sticks are supported?
         A. USB Flash sticks are supported in 64, 128, and 256 MB sizes. No other sizes are supported.
         Q. Can I use any USB memory stick for this application?
         A. No. Only Cisco USB memory sticks are supported.
    Q. Can I boot an image directly from the USB Flash module?
    A. Yes. USB drivers have been added to rommon, starting with version 12.4(13r)
         Q. Can I format the USB Flash module on the router?
    A. Yes. You can format the module on either a router or a PC. You must  specify "FAT16 file system" as the file system for the PC format process  to use.
    If your setup satisfies above conditions you can get the router to boot up with the IOS on the USB flash
    If you are in ROMMON mode, use 'dev' to find out the name of the USB Flash (should be usbflash0).
    set BOOT=usbflash0:
    If you are in the router,
    boot system flash usbflash0:

  • How can i use the NI USB-6501 digital I/O with matlab?

    I want to use the  NI USB-6501 digital I/O with data acquisition toolbox in matlab?

    The USB-6501 is supported by Data Acquisition Toolbox in MATLAB releases R14SP3+ and later.
    The full list of National Instruments devices supported by Data Acquisition Toolbox is here:
    http://www.mathworks.com/products/daq/supportedio14005.html
    Begin to learn how to use digital input and output here:
    http://www.mathworks.com/access/helpdesk/help/toolbox/daq/f11-17944.html
    Inside MATLAB you can view demos in the documentation.
    To see two digital demos you can type these commands at the MATLAB command line:
    >> showdemo('demodio_intro')
    >> showdemo('demodio_line')
    Best regards,
    Sherryl
    Sherryl Radbil
    Data Acquisition Engineer
    The MathWorks

  • How can I formate my 32gb usb drive as single FAT partition on my macbook?

    How can I formate my 32 GB USB Drive as a single FAT partition only macbook pro? So I will be able to download windows onto my macbook.
    Please put each step I have tried everything and its not working at all. 
    Thanks

    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select the USB drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to MBR then click on the OK button. Set the format type to MSDOS. Click on the Apply button and wait until the process has completed.

  • Can I Use Bus-Powered USB Drive

    Hi.
    I have a La Cie ("All Terrain") USB hard drive that I normally connect directly to my G5 Quad's USB ports. It draws its power off the bus.
    However, I'd like to use it with my Airport Extreme as a network-shared drive. Does anyone know with certainty whether the AE can supply the necessary power to the USB drive, or will I have to get a separate Transformer/Adapter for this USB drive. Also, am I taking any chances on harming the AE if I give it a try?

    I have a WD Passport 250GB USB powered drive that works fine. I use it to stream video to my iMac. I also have a WD MyBook 1TB w/ external power that works fine for storage but is too slow for streaming.

Maybe you are looking for

  • Iphone 6 home button sensor not working

    I just got the iphone 6 in the mail and I've been having trouble setting up the fingerprint lock and reachability option. My home button sensor doesn't seem to work. I had my thumb over the fingerprint sensor for 5 minutes and it didn't read at all..

  • Difference between Webservice and RFC

    Dear Experts, We have an application to implement where the application will be called from other NON SAP technology. We got two solutions one is developing RFC's and calling it from other NON SAP Technology OR developing Webservice. Could any one pl

  • Firewire Target Disk Mode Battery Icon

    When trying to enter TDM with Lacie drive connected by firewire I get the TDM yellow icon and an icon at the bottom that appears to be a charge or battery icon. It appears red. Note: -Power is connected (third-party ac adapter by macally) -When in Le

  • Activity Report Settings

    Is there a way to change the settings for Activity Reports available under System Administration > Monitoring > Portal > Activity Reports?  In particular, we want to expand the "Number of Users in the Last 3 Hours" section to let us see the informati

  • ' + ' is appeared in place of field names in table mainatainance(SM30)

    Hi Friends!     I have created a table and generated table maintainance for it. When i am trying to update the table in SM30, I have found '+' in place of field names. Please give solution for getting field names. Regards, Prasad.