How can I use a photo I have taken for my lock screen properly?

I have tried to use a photo taken on my ipad as my lock screen picture. However, when I come to use the picture through settings and change picture, it displays the picture zoomed in and will not let me 'move and scale' it properly to include all of the picture or photo. It will only let me move the picture left or right. I have tried to take the photo many different ways using the camera including portrait, landscape, square shot. I have also tried to crop the picture before trying to use it as a lock screen shot but it then appears zoomed in even more! Help!

It's a glitch with iOS7. If you go in through the photos app and send the photo to be your wallpaper you have a bit more control, although not as much as you're used to.
its a work around until they fix it.

Similar Messages

  • How can i use the apps i have downloaded on itunes

    how can i use the apps i have downloaded on itunes

    Apps downloaded through iTunes will only run on iOS devices such as iPhones, iPod Touch, and iPads. Plug your device into your computer, open iTunes, and click on it in the bar either at the top or the left side. Then, click apps at the top, and click install next to the app you want installed.
    If you are looking for apps to run on your Mac, you need to download them through the Mac App Store, not through iTunes.

  • How can I use apps that I have purchased from Apps Store for Mac on my iPad2?

    how can I use apps that I have purchased from Apps Store for Mac on my iPad2?

    Thanks, varjak, it is too easy to fall into use of jargon assuming everyone understands what it means.
    One additional point in all of this, not all "iDevice" apps run on every "iDevice".  Some are customized for a specific device, or class of devices such as the iPod/iPhone with their smaller screen.  Others for just the iPads for their larger screens.  So the user needs to be sure they are getting an app that will work on their specific device.
    And to Phoneboone, you do need to purchase the app again if it is for a different class of equipment.  When you are looking at apps such as iWorks for the Mac and iWorks components for the iPad, the iPad versions are very inexpensive.  Pages is only $10 (US) which is really cheap for such a good word processor that reads and saves in the MS Word format.
    Anyway, search for what you need and just enjoy the convenience of so many options for apps.

  • My camera roll in my 5c has over 2000 pics my photo stream only has 900, how can i make the photo stream have the same amount of pics so i can delete some from my roll to free up space

    my camera roll in my 5c has over 2000 pics my photo stream only has 900, how can i make the photo stream have the same amount of pics so i can delete some from my roll to free up space

    Photostream is not a substitute for importing your photos to your computer.
    How long are My Photo Stream photos stored in iCloud?
    The photos you upload to My Photo Stream are stored in iCloud for 30 days to give your devices plenty of time to connect and download them."
    ow many photos are stored in My Photo Stream on my devices and computers?
    iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.
    Your iOS devices keep a rolling collection of your last 1000 photos in the My Photo Stream album.

  • How can I use slideshows that I have created in Aperture 3 (complete with captions and music tracks) in my DVD through iDVD version 7.1.2 ?  iDVD Manuals that I have read seem to avoid explaining that export process.  Any advice will be greatly appreciate

    How can I use slideshows that I have created in Aperture 3 (complete with captions and music tracks) in my DVD through iDVD version 7.1.2 ?  iDVD Manuals that I have read seem to avoid explaining that export process. I'm using Aperture 3, Mac OS X (10.7.5), on a Any advice will be greatly appreciated.  Anthony Zasadney, Bolingbrook IL.

    Export the slideshow from Aperture as a .mov file and import it into iDVD.

  • How can you use the same e-mail address for multiple ipads?

    I have two iPads.. an iPad and an ipad 2.  I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use.  how can you use the same e-mail address for multiple ipads?

    And by using the same Apple ID you can also share purchases.  If you have a different Apple ID for each iPhone then you can't share purchases.

  • How can i use the amp designer or pedalboard for software instruments in garageband 10

    how can i use the amp designer or pedalboard for software instruments in garageband 10?
    and how can i customize the effects for the master track? in different factory presets are different effects, but how can i choose them manually?

    hongconga wrote:
    I want to record a podcast using my Mackie mixer and have the mix sent to Garageband through the USB I/0, but it doesn't seem to give me the option.
    i think the first thing to do would be to check with Mackie support. two things noted on Mackie's website:
    DRIVERS::
    No Driver Required for Supported Windows (PC) or OS X (Mac) Versions
    (note "supported")
    and
    For the Mac::
    Mac OS X 10.4.11 – 10.7.1
    ask if their firmware currently supports OS X 10.9.x

  • HT1386 how can i use my itunes music as ringtones for my contacts

    how can i use my itunes music as ringtones for my contacts. I have a ton of music in my Itunes library, but cannot figure out how to set up my ringtones for my contacts.

    http://techtips.salon.com/use-itunes-music-ringtones-iphone-3547.html

  • How can I use my IPAD as a wifi for my IPHONE? Is that possible, How can I use my IPAD as a wifi for my IPHONE? Is that possible

    How can I use my IPAD as a wifi for my IPHONE? Is that possible, How can I use my IPAD as a wifi for my IPHONE? Is that possible

    Is there a reason you can't connect your iPhone to the same Wi-Fi network as your iPad?

  • How can I use a pic from iPhoto as a background for a page, How can I use a pic as a background for a page

    How can I use a pic from iPhoto as a background for a page, How can I use a pic as a background for a page

    cd,
    Insert the picture and position it as you desire
    Make sure the picture is set to Floating in the Wrap Inspector
    Arrange > Send Objects to Background
    Regards,

  • How can I use one photo twice in a slideshow

    I am in iPhoto '11 9.4.3 making a slideshow to send to iDVD for my mother-in-laws funeral next Wednesday.
    How can I use this one particular photo of her several times in the slide show.
    I have tried copy/past and that does not seem to work.
    Thanx in advance

    I would just duplicate the picture several times and keep inserting duplicates ...

  • How can I use a photo from my files as a screen saver?

    I have an LG monitor about 10" high and 16" wide.  How can I send a photo from my Adobe files to my desktop as a screen saver.  Because of the odd dimensions of this monitor, the one I have as a screensaver now does not show the entire photo. I need instructions how to choose one of my photos, send it to the monitor as a screen saver, and make it the correct size to show the entire photo.

    You'll need to download the song from your cd to your my music folder, then open Itunes files add files or folder to the library then you find your song from your my music folder.   Then you will have to create the ringtone:
    http://http://www.ehow.com/how_2160460_custom-iphone-ringtones-free.html
    follow the instruction to create then sync the ringtones.

  • How can I use the photos from iphoto to display in contacts?

    Contacts has a space for a photo.  At one time I knew how to populate this space with photos from iPhoto. Currently my choices are to use an icon or take a pic with the camera.
    How can I add the photos from iPhoto to the choices for populating the "Contacts" image space for individual cards?

    See this Discussion...
    https://discussions.apple.com/message/19082703#19082703

  • How can i use exisitng user data(Id, password) for user mapping

    Hi All,
    For User mapping , we can import user mapping data for many users from user administration. and for each user
    we can maintain mapping data in the standard format.
    eg:
    [User]
    uid=user2
    $usermapping$:BCE:user=ext_user2
    $usermapping$:BCE:mappedpassword=password
    i am clear till this point.
    this all works if we know the userid and passowrd on the system 'BCE'.the passwords on the system 'BCE', are encrypted . so there is no chance for me to know the passwords.
    so how can i use the existed userid/passowrd on the system 'BCE' for the mapped user and mapped password on the portal while doing usermapping.
    Thanks in Advance,
    Lakshmi

    Hi,
    I think this should work.
    1. Setup SSO with SAP logon tickets first. How to do this is described many places, e.g. http://help.sap.com/saphelp_nw04/helpdata/en/d3/41c8ecb31d11d5993800508b6b8b11/content.htm
    This SSO will not work at first, because the username is different in the back-end system. So what you need to do is to get the back-end username into the ticket (don't need a password because that is done by the SAP logon ticket)
    2. Create a portal component which uses the usermanagement API to create a usermapping which only consists of the username and a blank password. You can do this manually I think if you have no reference system defined.
    IUserMappingService umap =(IUserMappingService)PortalRuntime.getRuntimeResources().getService(IUserMappingService.KEY);
    //this is the currently logged in user. You might another user
    IUserContext user = request.getUser();
    //Get the existing data (think it can be null)
    IUserMappingData userMapping=umap.getMappingData(systemAlias, user);
    HashMap map = new HashMap();
                             map.put(IUserMappingService.UMAP_KEY_USER, backEndUserName);
    //add blank password               map.put(IUserMappingService.UMAP_KEY_PASSWORD, "");
    //store the values                    userMapping.storeLogonData(map);
    Voila, this should allow you to do SSO using SAP logon tickets, but with another name that you use against the portal. I am uncertain if this will work if you have multiple usermappings in the sap logon ticket
    PS since the sap logon ticket is issued at logon time, you need to relogon to get the changes done by the code
    Regards
    Dagfinn

  • HT201209 How can I use app which I have received as gift.

    I have gifted a friend a application.
    But he has still not received any message or link regarding it.
    How can he receive and use tht app.

    When you purchased it for him, did the vendor supply you with a redemption code? Maybe just send your friend the code.

Maybe you are looking for