How can I use a 'Scribe' type dictation pedal with Quicktime.

I use the programs 'Scribe' and 'Express Scribe' to do dictation. Recently one client, who records with an IPhone, started sending me files that will only open in Quicktime. (Did he 'upgrade' software? Not sure... but the files worked in Express Scribe until June 24th). Does anyone know if A) I can download a 'codec' to play the Apple .wav files in Express Scribe or B) how to set Quicktime up to be used with a dictation pedal. Thank you in advance for your help.
Kel

I thought that you were looking for a solution like the attached VIs.
Write Key (Variant).vi accepts a variant and determines which Write Key
().vi to use according to the datatype. It requires some more
work since it does not make distinction between float and integer types.
Your solution is good too as long as you don't care to store flattenned
strings in a config file instead of more human readable ASCII string
conversions.
Regards,
Jean-Pierre Drolet
"Bmarsh" a écrit dans le message news:
[email protected]..
> OK, admittedly I had to change both VI to get this to work. I guess I
> meant to say that this solves my problem of wanting a VI that could
> gene
rically write out a cluster reference without knowing all the
> details of what is in the cluster reference. And another VI that can
> generically read out of the file and apply that to another cluster
> reference.
>
> The GenericWriteParams.vi now loops over every control in the cluster
> and grabs the "Value" property. This is flattened using "Variant To
> Flattened String" and then the flattened string is written to the
> config file.
>
> The GenericReadParams VI now looks at each control in the reference
> and finds out the name and "TypeDesc" property. The name is used to
> lookup the flattened string from the config file, and the "TypeDesc"
> property is used to unflatten the string (using "Flattened String to
> Variant"). The Variant is then written to the control value.
>
> These two functions allow me to store and retrieve any generic control
> I want to.
>
> I'm attaching them.
[Attachment genericwriteparams.vi, see below]
[Attachment Write Key (Variant).vi, see belo
w]
LabVIEW, C'est LabVIEW
Attachments:
genericwriteparams.vi ‏24 KB
Write_Key_(Variant).vi ‏74 KB

Similar Messages

How can I use my Dell photo 924 printer with my iMac

How can I use my Dell photo 924 printer with my iMac, I have tons of ink and don't want to buy a new printer right now.

People who need to SCAN & PRINT without a compatible driver from their manufacturer can use Apple's very basic "PRINT & SCAN" utility in System Preferences:
Click the Apple menu ( ), and then click System Preferences .
Click Print & Scan ( ).
Click Scan , and then click Open Scanner .
Click Show Details . The details of the scan display, including options to modify scan settings such as output type.Figure 2: Example of the Show Details scanning screen
Change any settings as necessary, and then click Scan .
Hope this helps

How can I use a vector image to stretch with the backgrounds in Muse master pages?

How can I use a vector image to stretch with the backgrounds in Muse master pages?

Maybe there's a bug. I think it's only showing it when it wants to because look:

How can I use my Ipod as an alarm with wake up to an internet radio?

How can I use my Ipod as an alarm with wake up to an internet radio?

You need to find an app that does bot since one app can effect another app (an alarm app can tell an internet radio app to start playing). There is Trance Radio with Alarm and Radio with Alarm Clock

How can I use a iteration control to compare with array?

Dear All
I have done a program and I need to test me program...but I seem to have to problem...I don't know how to use a iteration ( a for loop ) to test my program...
My test code is written like this...
public class ClockWatchDemo
public static void main(String[]args)
TimePiece[] tpList = new TimePiece[3];
tpList[0] = new Watch(200, "Vintage", "Men");
tpList[1] = new Clock(400, "Classic", 70);
tpList[2] = new Clock(300, "Futuristic", 45);
for(int i=0; i<3; i++)
if( i == tpList[0] ) // how can I do to compare my temp integer with the array number?
System.out.println(tpList[0].toString() + "\n");
else
return "";
Please advise

Thank you for your help but how can i compare my temp int i to the tpList array?
I wanted to do something like this
if( i == tpList)
System.out.println(tpList[i].toString() + "\n");
but I will get prompt to inform me that
if( i == tpList[i])
incomparable types : int and TimePiece
Please advise.
Thank you

I have a i phone 4,4.3.5 bought from uk i used this in uk but now i am in india how can i use this phone in other networka with out jailbreak such ntype of softwares

i have a iphone 4,4.3.5 bought from uk i used this phone in uk,now i am in india how can i use this in another networks without jailbreak such type of softwares

Where did the phone come from as most of the UK carriers unlock phones, but the fact that you are now abroad may be a problem.

How can I use javascript in a Text Area with HTML editor??

My question is... how can I use javascript in Text Area with HTML editor??
I can use javascript functions that change the content of Text Areas but i can´t if i try in text area with html editor....
I need to limit number of characters in a text area with html editor and i can´t.
could anybody help me please?

I have been experiencing similar problems with the HTML Editor and have managed to find an answer that should start to answer some of my questions. The Apex HTML Editor Standard is actually an HTML editor called FCKeditor. The FCKeditor has a Javascript API that can be found at http://docs.fckeditor.net/FCKeditor_2.x/Developers_Guide/JavaScript_API. Unfortuately this doesn't seem to give the whole answer and I found more at http://www.houseoffusion.com/groups/cf-talk/thread.cfm/threadid:49607.
I needed to get the text entered within my html editor standard (e.g. P1_MYTEXT) and use it within my javascript function. I did this by using the following script
<script language="JavaScript" type="text/javascript">
function showtext(){
var oEditor = FCKeditorAPI.GetInstance('P1_MYTEXT');
var editortext = escape(oEditor.GetXHTML(oEditor.FormatOutput));
alert(editortext);
</script>
Hope this helps.
Matthew

How can I use same account in 2 iphone with diff contact list?

how can I use same account number but other all totally diff such as contact list, application, everything ..... I found that it's bad on IOS5.
when I used IOS4 .. old verison, I can keep my phone in diff data. Afte upgrade IOS 5, it's bad. Even take photo, it can not focus zoom in and out.

how can I use same account number but other all totally diff such as contact list, application, everything ..... I found that it's bad on IOS5.
when I used IOS4 .. old verison, I can keep my phone in diff data. Afte upgrade IOS 5, it's bad. Even take photo, it can not focus zoom in and out.

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

How can I use any website on the internet with my apple tv?

How Can I use internet or the web on my apple tv?

Welcome to the Apple Community.
You can't unless you mirror it from your iPhone or iPad.

No ISA slot available in PC. How can I use PCI-85 Modbus Plus card with Lookout?

My application is to communicate with two Modicon PLCs using Modicon's ModBus Plus (PCI based PCI-85) network card inside my PC, and using Lookout as an SCADA software. Since there is no ISA slot available in new PCs, I can not use Modicon's ISA-85 Modbus Plus networc card. But Lookout does not support PCI based PCI-85 card, how can I use PCI-85 card then, with Lookout? Why doesn't Lookout support it? I asked the following question from from the Modicon's representative about it:
If I purchase Modbus Plus Driver Suite CD (SWMXDS001, 05, or 10 etc),will I be able to use Lookout SCADA software (by the way, it supports standard MB+ prtocol) for my application? If yes, can I use any version of an
y of the ISA, PCI, or PCMCIA based MB+ card?
His answer was:
The Modbus Plus Driver Suite will talk to any version of card, PCMCIA, ISA, and PCI. The question now is will the SCADA package you are
planning on using be able to talk to the Modbus Plus Driver Suite? You must contact National Instruments and ask them if they support Modbus Plus, and if
they used the MB+ system developement kit to develop their product. Or if they wrote their own MB+ drivers, do they work with Modicon hardware?

Hi,
currently Lookout does not support the PCI-85 card. The only card supported for Modbus Plus is SA-85. Please see for further information:
Where can I Find Drivers for Communicating to PLCs, RTUs, and Other Industrial Hardware?
How to configure the SA-85 card for Modbus Plus
Hope this helps
Roland

[EWS][Java] How can I use the Search Filter only mails with attachments?

Hey,
I'm trying to search a folder ( doesn't matter which ) for ONLY mails with attachments.
How can I use the search filter for that purpose?
Thanks!

You can drag the attachment collumn from settings and sort on that collumn
In the main Outlook window, on the View menu, point to
Current View, and then click Customize Current View.
Click Fields. In the Available fields list, click the field that you want to add, and then click
Add.
Come back and mark replies as answer if they help, and help others with the same problem. If this post is helpful please vote it as Helpful on the left side.

HT1918 how can i use a itunes card for payment with netflix?

how can i use itunes card for payment for netflix?

Sorry guy, but I think you are out of luck on that one- maybe someday if Apple gets Netflix under an exclusive contract.. But for now Netflix is its own entity, therefore your account with Netflix is not affiliated with your iTunes account and you have to subscribe and pay for Netflix via credit or debit card.

How can get & use java true type fonts in my applets

Hi
I could get the System fonts in my Applet by making use of Toolkit.getFontList()
I have used getGraphicsEnvironment to get fonts but my browser doesn't support it.I get ClassNotFoundException.
How can I get & make use True Type Fonts in my Java Applet.
any body knows reply immediate pls
Siva

similar problem:
http://forum.java.sun.com/thread.jsp?forum=31&thread=164516
sorry, thats all i know.
tobias

With Pages 5.2 how can i use multiple language types in a single document

My Macbook Air Has the version 10.9.3
I'm used to work with the old version of Page.
But now I am using the new version of Pages 5.2 (1860).
I want to know with the new version how do I use an multiple language types in a single document option.
In the old version of Pages I was using Inspector -> Text -> "More" tab -> Language: British Inglese.
In the new Pages 5.2 I do not know how to do it
Could you help me?
melo

It's not possible to tag text with multiple languages in Pages 5. Go back to Pages 4, which should still be in you iWork folder.
For the whole doc in Pages 5, use Edit > Spellling and Grammar > Show Spelling and Grammar.

How can I use a 'Scribe' type dictation pedal with Quicktime.

Similar Messages

Maybe you are looking for