How can I use a username to log in to this forum.

The size of the username box in this forum is too short to see my full email address and as a result I often have to try a few times because I cant see if I make a typo. This is rather annoying because you can see if you perhaps made the mistake in the password because all you see is a row of dots.
Is there any way I can use a shortened username? I seem to remember I entered one originally but it has never worked

Ted,
There is a good, active forum for Forum Comments. Adobe-Admin (John), can help you with all sorts of issues with Log-in, and accessing the forums. I would post there with the issues and your needs, and wait a bit for John to get to the post. He's good, fairly quick, and works hard to help - but he IS overworked, so you may have to be patient.
Good luck,
Hunt

Similar Messages

When i want to purcahase for first time on itune,,it said this ID have never been used on itune .how can i use my ID to purchase it if this is my first time?

when i want to purcahase for first time on itune,,it said this ID have never been used on itune .how can i use my ID to purchase it if this is my first time?

Hi Zannat,
Don't get scared. Cookies are the small file which stores your settings for a website, such as location details, login details, language details and so..
Some sites don't care about your cookies settings but some other sites instructs you to enable cookies in your browser. Enabling cookies is too easy.
Just follow the instructions which explained [[Enable and disable cookies that websites use to track your preferences |here]] .
Thank you!!!

How can I post the screenshot in my topic in this forum?

<p>Dear Expert:</p><p>I want to load the screenshot in my topic which I posted to this forums. I just copy and paste the screenshot in the topic body when I edited, and I can see it when I edited. But after I submit to post it to the forums, the screenshot disappear.</p><p>Could anyone tell me how to post the screenshot or picture to the forums and others can view it? It'll be helpful for me to describe problem clearer and others understand it clearer.</p><p>Many thanks for your help!</p><p>Steven</p>

<p>I created a Flickr account and uploaded my screenshots there. Then I insert the URL to the picture. I believe that you have to change the input format to allow HTML tags as well. Unfortunately, you may not have permissions to do all that...I am not sure. In any case, you can insert the link to your flickr picture and we can navigate to it. </p><p>Regards,<br />Sean Johnson (CR4E Product Manager) <br /><br /> <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a> </p>

How can we use 'keystroke' to automatically log in via UI like "Use SystemEvents in 10.6"

HI everyone,I can use a script as
username="super"
password="mario"
/usr/bin/osascript <<AppleScript
tell application "System Events"
keystroke "$username"
keystroke return
delay 3.0
keystroke "$password"
delay 3.0
keystroke return
end tell
AppleScript
exit 0
to automatically UI log in when I'm in mac 10.6, but now it can't work with Lion,
only got an "execution error:An error of type -10810 has occurred.(-10810)" message
anyone can help? Thanks a lot~~~

some more details in system.log:
Sep 6 14:21:08 mac107_711 com.apple.launchd.peruser.0[427]: Background: Bug: launchd_core_logic.c:10063 (24984):0
Sep 6 14:21:08 mac107_711 com.apple.launchd.peruser.0[427]: Background: This API can only be used by a process running within an Aqua session.
Sep 6 14:21:08 mac107_711 osascript[1200]: spawn_via_launchd() failed, errno=5 label=[0x0-0x62062].com.apple.systemevents path=/System/Library/CoreServices/System Events.app/Contents/MacOS/System Events flags=0

How can we use Adobe's Digital Publishing Suite given this scenario

I have a question regarding a very specific scenario as it applies to Adobe Digital Publishing that I am having trouble finding an answer to.
We are a small design firm that produces small-run, proprietary-information, official documents.
Each document is branded to one of our clients, but each document title's design is entirely unique even when done for the same client.
Our clients then selectively distribute these documents to a small number (max 200) of their propective clients (NO GENERAL DISTRIBUTION -- NO APP STORE or iTUNES -- NO CHARGE).
It would be nice that each of our clients could have a branded Adobe Viewer with which their selected prospective clients could view only those documents sent to them (PUSHED); NOT everyone with a client-branded Adobe Viewer would be PUSHED the same document.
And similar to the documents being PUSHED to only specific prospective clients of our clients, that our client could subsequently PULL / delete a document from the prospective client's viewer when the document has expired (besides being promotional documents, they are legal as well, and when expired, need to be withdrawn from readership).
So, how is something like this done? What Adobe DPS pricing plan applies?
Would it be a Single plan, but for each client branded viewer? The Professional and Enterprise pricing setup is excessive given our extremely small scale of extremely specific directed distribution for no revenue from that distribution.
Please help me understand, since I cannot find such an answer online.
Thank you.
Mark

If I understand you correctly, you would need an Enterprise level account for that.
Bob

How can I use the Starz on demand app on this tablet?

I am trying to register on my Verizon Elllipsis tablet,but my satellite provider is not listed and there is no place to add it.

How its related to firefox Android?

How can i use a second router to replace verizon fios router?

Okay so just as the title says how do i use a second router? I got a cisco valet router... I don't know how to use it because the verizon router/modem is wierd i know how to use a router if i only had a modem but fios gives router/modem so how can i use my 2nd router? The current verizon fios router/modem is b/g mode and i wanna change to b/g/n so i can get a better speed from my internet... SO how can i use my 2nd router? I tried this http://www.dslreports.com/faq/verizonfios/3.0_Networking#12506 but i don't get it can someone guide me better or make a video explaination on how to use a 2nd router? I have it connected with see as in pic i connect from my router Internet port to wan port and the ethernet lan port to the ethernet lan port on verizon fios and no work please help...

OK, so with this, we have a few options. You appear to have a MoCa connection to the ONT, hence the coaxial cable being present.
1: The ActionTec can be bridged to the Valet router. This will not require any additional cabling, however it will require a small amount of work to have working. You will also require the ActionTec still in the mix, even though it will not be acting as a router anymore with this configuration.
Visit http://www.dslreports.com/faq/16077 and look at Option 4. There is a thread linked that will allow you to set up the ActionTec as just a MoCa bridge, and will pass the Public IP to your router. You will, in order for this to work once the ActionTec is bridged, need to connect the cable from your Valet router's Internet port, to the ActionTec's LAN port and nothing else goes to the ActionTec. From this point, your Valet should run as your primary and everything should connect through your Valet. If you are adding another router, a Netgear N300, you should perform the LAN to LAN setup, which we will talk about once you've got the Valet working correctly. LAN to LAN configs require a custom setup, so do not set up the Netgear for now.
2: This is my preferred method, which would be to run an Ethernet cable to the ONT. Option 6 in the FAQ. This will require spaking to Verizon to have them move your ONT to Ethernet, but once they do this, you can disconnect the Coaxial Cable from your ActionTec router, and plug in your CAT5/CAT6 cable from the ONT to the ActionTec's Internet/WAN port. Use the ActionTec to ensure everything is working after the switchover, and once off the phone, log into the ActionTec, perform a DHCP Release, and then prompty power off the ActionTec. Once this is done, plug the CAT6 cable into your Valet router's Internet port. You should from this point, be able to connect to the Cisco, and if the DHCP Lease was broken successfully, the Cisco should begin serving up your Internet connection. If it does not, leave the Cisco powered off for a few hours to break the DHCP lease, and then power it up. If the Valet does not work, still, give the Valet a factory reset and set up this router again, with the Ethernet cable from the ONT connected to it.
I would just take a good luck at the FAQ linked above again, and see what would work the best. Easiest thing to do is to get the ONT moved to Ethernet, which allows you to eliminate the ActionTec unless you need it in the future for TV service, and also allows you to use any router with ease.
Once the Valet is up and running and holds your Public IP address from Verizon (use http://whatismyip.com/ to determine this) , and also serves up IPs to devices on your network, post back and we can help you set up the Netgear. If you have any issues while setting this up, fall back to the ActionTec. It's factory reset will work without configuration needed, regardless of you being on Coax or Ethernet.
========
The first to bring me 1Gbps Fiber for $30/m wins!

How can I use my time capsule with windows7

How can I use my time capsule with windows7?

This is asked regularly.
https://discussions.apple.com/message/10978060#10978060
Look at the more like this. On the right column next to the post.
Load airport utility for windows.. which will also load bonjour for windows.
In windows explorer type \\TCname or \\TCipaddress (replacing with the actual values.. names with spaces will give you trouble so change all names in the TC to SMB compatible or actual ip address).

My wife and I share an apple id how can we use face time

My wife and I share an apple ID. How can we use face time?

Try the MacBook Pro forums and perhaps Apple ID or Facetime, this forum does not deal with notebooks or facetime.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
http://www.apple.com/support/

What is the use of control breaks in reoprts?how can we use them in report?

hello all
what is the use of control breaks in reoprts? and how can we use them in reports?

hi,
check this sample program using control break statements.
*& Report Y777_CBSTABLE
REPORT Y777_CBSTABLE1.
TYPES:
BEGIN OF S_MARKS,
     ROLLNO    TYPE I,
     SCODE(3) TYPE C,
    ROLLNO    TYPE I,
     SNAME(10) TYPE C,
     MARKS     TYPE I,
END OF S_MARKS.
DATA : C TYPE I,
       D(3) TYPE C,
       TOT TYPE I,
       STU TYPE I,
       MARKS TYPE STANDARD TABLE OF S_MARKS,
       WA_MARKS TYPE S_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'MAT'.
WA_MARKS-SNAME = 'MATHS'.
WA_MARKS-MARKS = 65.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'SCI'.
WA_MARKS-SNAME = 'SCIENCE'.
WA_MARKS-MARKS = 85.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'COM'.
WA_MARKS-SNAME = 'COMPUTER'.
WA_MARKS-MARKS = 90.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'MAT'.
WA_MARKS-SNAME = 'MATHS'.
WA_MARKS-MARKS = 55.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'SCI'.
WA_MARKS-SNAME = 'SCIENCE'.
WA_MARKS-MARKS = 75.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'COM'.
WA_MARKS-SNAME = 'COMPUTER'.
WA_MARKS-MARKS = 80.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
RETRIVAL ************************************
SORT MARKS BY SCODE .
LOOP AT MARKS INTO WA_MARKS.
    AT FIRST .
       ULINE.
       FORMAT COLOR 6 ON.
       WRITE:/ 'SUBJECT CODE', 65 ' ' .
       FORMAT RESET.
       FORMAT COLOR 6 ON INTENSIFIED OFF.
       WRITE:/20 'ROLL NO',
              40 'SUBJECT NAME',
              55 'MARKS',
              65 ' '.
       FORMAT RESET.
       ULINE.
    ENDAT.
    ON CHANGE OF WA_MARKS-SCODE.
       IF SY-TABIX NE 1.
           NEW-LINE.
           ULINE 40(25).
           FORMAT COLOR 5 ON INVERSE ON INTENSIFIED ON.
           TOT = TOT / STU.
           WRITE:/40 'AVERAGE MARKS =', TOT.
           FORMAT RESET.
           CLEAR TOT.
           CLEAR STU.
       ENDIF.
      FORMAT COLOR 6 ON INTENSIFIED ON.
      WRITE:/ WA_MARKS-SCODE.
      FORMAT RESET.
    ENDON.
    FORMAT COLOR 6 ON INTENSIFIED OFF.
    WRITE:/20 WA_MARKS-ROLLNO,
           40 WA_MARKS-SNAME,
           55 WA_MARKS-MARKS,
           65 ' '.
    FORMAT RESET.
    STU = STU + 1.
    TOT = TOT + WA_MARKS-MARKS.
    C = STU.
    AT LAST.
           NEW-LINE.
           ULINE 40(25).
           FORMAT COLOR 5 ON INVERSE ON INTENSIFIED ON.
           TOT = TOT / STU.
           WRITE:/40 'AVERAGE MARKS =', TOT.
           FORMAT RESET.
           CLEAR TOT.
           CLEAR STU.
         ULINE.
         FORMAT COLOR 6 ON INVERSE ON INTENSIFIED ON.
         WRITE:/ ' TOTAL STUDENTS : ', C.
         FORMAT RESET.
    ENDAT.
ENDLOOP.
reward points if hlpful.

How can i use JavaScript in Struts

Any one can please tell me how can i use simple java script in Struts framework
like
<script language="javascript">
function call()
alert("You Are In call()")
</script>
</head>
<body>
<form ..... >
<input type="button" value="CHECK" onclick="return call()" >
</form >........
ok this i can use in normal jsp
but how can i use same in Struts framework
Thanks in advance

This forum is for JSF, not Struts. Your best bet to get your question answered, is to post to the struts user mailing list.

How can I use clientChannel.subscribe()?

I would like to synchronize the state of an item among different users instantly. Comet is offering subscribe to get notifications of changes.
How can I use that with the Method API?

This feature is already built in.
When you call clientChannel.publish as shown in the documentation all the users states will be instantly refreshed because we force the callback function to be called for all of them at the same time.

How can I use my Apple TV at a friends house ?? Is it not just a case of connecting to wifi then log on with my apple ID ?!

How can I use my Apple TV at a friends house ?? Is it not just a case of connecting to wifi then log on with my apple ID ?!

Thanks, I'll try it again. Was coming up on the screen saying something about cant work until the clock / time is configured or something ???

How can I use firefox between windows 7 & windows XP on a network, where we are using Samba server. If a user logs on different workstation(and OS) with same account.

we have a Linux fileserver with Samba share and have several users.
The users tend to be in different locations and need to login at different workstations, sometimes the workstation may be WindowsXP and othertimes it is windows7.
How can we use Firefox & Thunderbird in this situation.
I find that Windows7 uses compressed files to store the location information.
when a user logs on to win7 it creates a new account.

we have a Linux fileserver with Samba share and have several users.
The users tend to be in different locations and need to login at different workstations, sometimes the workstation may be WindowsXP and othertimes it is windows7.
How can we use Firefox & Thunderbird in this situation.
I find that Windows7 uses compressed files to store the location information.
when a user logs on to win7 it creates a new account.

How can I use my Apple accoujht in Spain? I am registered in UK but this prevents me logging onto AppleTV, which is annoying, do I need to open a Spanish account too?

How can I use my AppleTV in Spain?
I cannot connect to AppleTV to the internet because it says I do not have an account.
Do I need to create another account in Spain? Or, how do I use a VPN to comnnect the Apple TV?

Click on your account name in the top right corner of the iTunes store in the iTunes application on your computer, enter your password and click the "view account" button. Navigate to the Apple ID summary where you have the option to "change country or region".
In order to change your location, you will need a credit card registered to an address in the location you are trying to change to.
You cannot change your location if you have credit on your account, if you are unable to spend your credit and leave a balance of zero, contact Apple, which you can do through iTunes Store Support.

How can I use a username to log in to this forum.

Similar Messages

Maybe you are looking for