How can I use a Wacom STU-300 Sign Tablet with Acrobat Pro XI?

Hi have a sign tablet (STU-300) and created form with Signature field. I do not however get prompted to sign with tablet.

Yes.

Similar Messages

How can I use Aperture 3 on my new iMac with Maverick?

How can I use Aperture 3 on my new iMac with Maverick?

Do you own a copy of Aperture, perhaps bought for another Mac?
If you have not bought Aperture, you need to buy it from the AppStore.
But if you own Aperture and have it bought from the AppStore on another Mac, sign into theAppStore on your new iMac with the same AppleID you used to buy Aperure on your other Mac. Then look at the "Purchased" tab of he AppStore. It show Aperture, with the "Install" button to the right. Simply press the "Install" button and download it to your new iMac. Or if you have bought Aperture on a CD/DVD, run the installer from the CD/DVD on your new mac and immediately run software update to upgrade the Aperture 3. version to version that will run with Mavericks.
Léonie

How can I use Drupal as a third party CMS with ATG E-Commerce Application?

Hi Friends,
We are planning to use a third party Freeware Content Management System (CMS) for web site content in ATG E-Commerce Application, instead of ATG content Administration or merchandising.
Can anybody please let me know how can I use a third party CMS(Eg: Drupal) with ATG E-Commerce Application?
Regards,
Krishna.

I did create a rule to determine if anyone coming through time eval is a new hire based on vacation elig. date in IT0041. It compares Today to the vacation elig. date and if they match, set a time type indicator to 1. I also added another decision to determine if they were a part time employee and pro-rate their quota entitlement based on what's in their IT0007 weekly working hours. Instead of setting the time type indicator to 1, I recalculated based on a percentage of 40 hrs/wk and then updated the time type to that percentage. In my quota generation rule I use that time type as a multiplication factor to recalculate their new pro-rated amount rounded up to the nearest whole number.

How can i use isight camera to broadcast to web with Mac OS 10.4?

I am using an iBook G4 running OS 10.4 as a printer server. I have to do this to be able to print on my HP DeskJet 882c printer from computers running OS 10.6 and above (although I have not been able to get it to work with 10.8).
I can connect an iSight camera to the iBook via FireWire. Can I set that up to broadcast a video feed to a web site so I can visually monitor the area near the laptop and printer?

jrmnewtonma wrote: How can i use isight camera to broadcast to web with Mac OS 10.4?
You could use compatible older versions of QuickTime professional extensions for your Mac OS X version.
This professional quality software is very powerful, and it will certainly stream any video you need. However, it is not simple to use, so be prepared to do some research and study to get it configured and working.
To use your iBook with its OS X 10.4, you will need QuickTime Broadcaster 1.5.3
and Darwin Streaming Server (v5.5.5) (if you need streaming server functions.)
Although I have never used it, QuickTime Streaming Server 4.1.1 might be a useable substitute for Darwin.
Message was edited by: EZ Jim
Mac OSX 10.8.3

How can I use my Macbook as a dual monitor with my iMac?

How can I use my Macbook as a dual monitor with my iMac?

Then you want to use what's called Target Display Mode.
iMac (Mid 2011)- Target Display Mode does not work with Mini DisplayPort cable
Target Display Mode And Thunderbolt

HOW CAN I USE FACETIME IN MY MAC TO SPEAK WITH MEXICO??

HOW CAN I USE FACETIME IN MY MAC TO SPEAK WITH MEXICO??

where are you located? in some middle eastern countries facetime is blocked by the government.

Editting PDF documents that were created by a MAC doesn't work because of font incompatability. How can we get MAC fonts and load in our Adobe Acrobat Pro 9?

Editting PDF documents that were created by a MAC doesn't work because of font incompatability. How can we get MAC fonts and load in our Adobe Acrobat Pro 9?

If it's a Mac font and you're on Windows, you can't. If you are also on a Mac, you'll need to purchase the fonts (fonts are generally non-transferable, like software. One of the reasons pdf exists), install them and try your edits.
But it's best to edit the original document and create a new pdf when finished.

How can I use the speakers from my old iMac (with miniRCA? plug) on a new iMac

How can I use the speakers (M-Audio) from my old 24" iMac on a new 27" iMac? There is no jack on the new iMac - is there an adapter that will use the mini-RCA (?) plug from my old speakers to connect them to a new iMac? Thanks ...

Thanks again!
Hmmm ... I wonder. The input jack for external speakers quit working on my old iMac (it made lotsa static noise for a while when I moved the plug or computer, then quit working completely; I figure something inside the computer got loose or crapped out - and I'm too cheap/lazy to take it the 20 miles to the nearest shop that might fix it). When I plug the speakers into the headphone jack on the old iMac, I get very low volume or just one channel.
I don't have the new iMac yet, but I was hoping to use these old speakers instead of buying new ones. I will certainly try your solution - what do I have to lose? If they don't work, then I get new ones - or try something else.
Many thanks for your time!

How can I use the media Buttons on my M40X with WinAmp?

Hello
Today I got my M40X and i have a question.
There are 5 media Button left of the keybord (CD/DVD, Play/pause, Stop, <-/->)
Is it possible to use them with WinAmp?
In the Toshiba Assist i got the CD/DVD button used to start WinAmp (by use him to start a .exe) but the Play/pause...dont work. In the field media Apps the only Player i can choose is Win MP10 (I hate this piece of sh*t).
How can I use these Button with WinAmp?

Hello
As far as I know the Toshiba Controls were tested and designed only for Microsoft Media Player and WinDVD. How this topic says:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3621&messageID=11461#11461
I dont have any experience with WinAmp but I found useful info in this forum about this theme:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=6673&messageID=24448#24448
Check this.
Bye

How can I use Apple Caching Service on a Network with Multiple Public IPs?

Hello!
I help manage a network of ~4000 clients for a small liberal arts college in Michigan. I'm looking into the possibility of implimenting Apple Caching Server for our network.
We have one 400mbit pipe out to the internet, and all of our clients are given public-facing IPs to the internet. A caching server would be great, especially on update days. All wireless clients are on the same subnet, which is where I'd like the server to be serving the cached copies.
I have installed Mavericks on a fresh machine, downloaded OS X Server 3.0.3, and attempted to start the caching service. This is what I get.
Unable to start service.
Caching cannot be run on a public network. Consult documentation.
How can I get this up and running?

The way the Caching server works is that the server will be accessing the Internet and when doing so traffic will be coming from it via a particular public IP address. Usually this will not be the address of the server itelf but your router as for most networks NAT is used. In this by far more common scenario the client Macs (and likely iOS devices) will be going through the same router and hence show up via the same public IP address.
If the client request is the same as the address registered via the Caching server then Apple redirect the request via the Caching server.
The setup would look something like this -
           Internet
                |
            Router (with NAT)
                |
(LAN)     +------Caching Server-----Client devices
With this setup because everything is using the same public IP address Apple can reasonably assume everything is on the same network and trigger a redirection to your Caching server.
If you try a setup like the following with the Caching server having its own public IP it will not work because the Caching server and client devices will have different public IP addresses
           Internet
               |
           Router (no NAT)-------------------+
               |                                      |
            Firewall (with NAT)       Caching Server
               |                                      |
               |                                      |
(LAN)     +-----Client devices-----------+-----------
Your configuration as described is more like the following
           Internet
               |
           Router (no NAT)
               |
(LAN)     +------Caching Server-----Client devices
With yours not having NAT each device has its own public IP address including the Caching server and Apple cannot redirect traffic as it thinks they are on different networks.

How can I use my Dx7 as a MIDI controller for Logic Pro 9? I'm using MIDI/USB cable but Dx7 doesn't appear in the 'set-up' list, what am I doing wrong?

I'm using Logic Pro 9 - 9.1.8
MacBook Pro Retina OSX 10.9.3
DX7 2 FD connected to my laptop with a MIDI/USB cable
When I click the 'scan all models' search in the 'Control Surfaces Set Up' there is no Yamaha DX7 in the list so how can I make Logic 'see' the DX7?

As Colin pointed out, you have to look first in the Audio MIDI Setup. If your MIDI Device doesn't show up there, then Logic cannot see it either (unless you are using Logic Remote on your iPad to play over Wi-Fi).
I'm curious about the "MIDI/USB cable you mention. If the DX7 has a standard 5-pin DIN MIDI out jack, then you have to connect that to a MIDI Interface first that converts the MIDI signal to send it over the USB jack out. Please note that you would see the MIDI Interface in the Audio MIDI Setup app and not the DX7 itself. Also, in Logic you would see the MIDI Interface in the Environment as a valid MIDI input device.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

XCode: How can I use dictionary controllers for 2 dict's with a common key?

I have two dictionaries, both with the same key. Using Interface Builder I can build for each dictionary a two-column table, but I did not find out how to connect their keys so that selecting a line in one table automatically selects the corresponding line in the other table.
Does there exist a binding between the two controllers that solves the problem? If so, how can it be established?
(First I tried to use only ONE table - with 3 columns. This appeared to me the best way. But again I could not establish the appropriate binding.)

Hans,
You may want to post your question in the following group.
http://discussions.apple.com/forum.jspa?forumID=727

How can I use the function keys in a GUI with swing?

I'm wondering how do you declare you want an action to happen when a user uses a function key or any key for that matter. How can you specify something frame wide or for that matter for a specific jtextbox?

you need to use an accelerator
setAccelerator(javax.swing.KeyStroke.getKeyStroke(java.awt.event.KeyEvent.VK_A, java.awt.event.InputEvent.SHIFT_MASK | java.awt.event.InputEvent.CTRL_MASK)

How can I use a U.S. iTunes gift card with Cdn registration?

System does not recognize U.S. code on gift card on the Canadian site and I do not know how to cancel my Canadian registration so that I can set up a U.S. registration. I have addresses in both countries so it appears I should be able to register and buy songs when I have gift cards in both U.S. and Canadian dollars and depending on which country I am in.

Gift card are country specific. You can not use any country's gift card in another country.
You cannot buy from another country's itunes store either.
You may be able to sell your itunes card to someone in the U.S. and buy a Canadian itunes card.

How can I use Find my Phone in my Pc with Windows 7?

I am a new Iphone user, and I am rather lost in some issues. For example, How can I install and use Find My Phone in a Windows 7 environment.
Thanks and regards

Download the iCloud control panel for Windows, http://support.apple.com/kb/DL1455 and follow setup info from http://support.apple.com/kb/PH12803 so that all you need to do is open the iCloud control panel, login to your iCloud account, and click Find My Phone to see the information on the device.

How can I use a Wacom STU-300 Sign Tablet with Acrobat Pro XI?

Similar Messages

Maybe you are looking for