How can I use After Effects filters on a whole sequence without getting stuck in After Effects?

It appears that, with the options that are visible to the user, Dynamic Link only goes one-way and can't make round trips from Premiere Pro to After Effects and back again.  If I send a sequence to After Effects, that part works fine and I can do what I want and save the comp.  However, even though the comp appears as an asset in Premiere Pro, I am not allowed to do anything with it.  If I try to drag it to a new sequence, it just says no.  If I click "Create Sequence from Clip" it creates an empty sequence.
So how can I use After Effects on whole sequences/tracks instead of just on a clip-by-clip-by-clip-by-clip-by-clip basis?  is this possible?  For instance, if I have a whole sequence where I've neutralized the white balance, I might want to apply a warming filter to the whole thing as a unit.  That would be really painful with even a few clips to keep doing that again and again, and if you want to modify it slightly you have to do it over and over.  If there is a way to do that through Dynamic Link through some hidden option, what happens with the audio?  Would I have to cut it out of the lower sequence and paste it into the higher sequence with the After Effects comp as a video track?

I'm not an Adoby guy, hence you may ignore my reply, but Adobe Dynamic Link is obviously not just one way ticket and in most cases works just fine.
You have already been explained by J-MS and tclark513 how to properly use it and which pitfalls may occur.
So as to apply an effect onto a whole sequence or a group of clips you need to either nest them in PrPro or pre-compose them in AE. Then just apply an effect (or several ones) onto that composition.
So, if you nest clips in PrPro, select your nested sequence in the timeline, right-click and choose 'Replace with After Effects Composition'. Done! Your dynamically linked AE composition is in the right place in your timeline and in your Project panel as well. If you can not treat it as an ordinary footage, there are obviously some mistakes in your workflow. 
If you didn't nest your sequence or a group of clips in PrPro before replacing them with AE composition, you may easily do it within AE. Just select all the layers in AE composition and choose Layer -> Pre-compose... (Ctrl/Cmd+Shift+C) Done! Switch back to your Master comp and apply your desired effect(s) 
You may loose some effects or/and transitions while travelling from PrPro to AE via Adobe Dynamic Link, whereas you don't while travelling back
(If you start building your AE composition from scratch right in AE and then need to import it into PrPro, DO NOT export one as PrPro project out of AE, but rather choose Adobe Dynamic Link -> Import After Effects Composition... within PrPro)
P.S. And yes, submit a feature-request so that Adobe will convert 'Transparent Video' into fully functional 'Adjustment Layer'.

Similar Messages

  • Just upgraded to Lion, how can i use my microsoft office especially excel.  I'm getting messages that it's no longer supported.  This is a BIG problem.  Help, please.

    Just upgraded to Lion, how can I use my microsoft office especially excel.  I'm getting messages that it's no longer supported.  This is a BIG problem.  Help, please.

    Apple has made a serious error not advising people when the Lion upgrade occurs that their present software may/will not be compatible and advise the user of such before and allow a opt out.
    All you can do (besides upgrading all your software) is backup your data off the machine (not to TimeMachine) and disconnect all drives.
    Hold c boot off the 10.6 disk and erase your makers hard drive on the far left, (that's the entire drive of everything)
    Partition tab: Option: GUID, format OS X extended and click apply so you get a new GUID (replacing the Lion one or trouble occurs later)
    Quit and install 10.6, then go through setup and use the same name as before, then update to 10.6.8
    Then c boot off the 10.6 disk again and use Disk Utility to Repair the disk the 10.6.8 update messed up.
    Then install all your programs again from fresh sources and lastly your user files in the same main user folders as before (music, pictures, documents etc.)
    Done as described will get you back just like it was before as close as possible, make SURE to use the same username or else your iTunes and other files get all messed up. Password and drive name can be different though if you wish.
    Note: if you've upgraded from 10.5 to 10.6, then you don't get the free iLife as it's not on the 10.6.3 white disks, only on the disks that came with your machine. So that will have to be purchased and reinstalled or use Pacifist to extract it from the 10.5 disks.
    This handy site can advise you what software doesn't work with the Lion.
    http://roaringapps.com/apps:table

  • How can I use most of the features of firefox 5 without changing the appearance of my browser?

    I just downloaded the new version of firefox, and everything seems great except for the new layout and the change in general appearance. It is less streamlined and more distracting. I do not like the blocky look of the buttons or the lack of division between sections. Is there a way to keep the changes in the way firefox 5 works without the change in appearance?
    If there is not, how can I reload the old version of firefox until one I like better is released?

    See items 1- 10 in
    You can make Firefox 4.0.1 and '''Firefox 5.0''' look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]
    I would try to stick with the silhouette gray/black buttons, but since it already bothers you at least stick to a theme or style limited to the ones on the toolbars (not the dialogs, which would be too wasteful) see item #48
    * [https://addons.mozilla.org/firefox/addon/strata-xp/ Strata XP] (Theme (buttons), 13.3KB), replaces silhouette toolbar icons with color. Icons are smaller and perhaps less distinguishable.

  • How can I use an advanced action to show a sequence of images by clicking on a single button?

    I'm trying to make Captivate 7 project where I have several slides where images are revealed one after the other.  I wanted to insert a button along the lines of click here for next image but can't work out how to write the script for it.  The Adobe information is next to useless and I can't find anything which breaks down these processes from scratch.  Any help appreciated!

    You're a little early but help is on the way.  There are a couple of new e-books being written about using Advanced Actions.
    One of them is currently available as a discounted pre-release here:
    http://www.infosemantics.com.au/e-books/guide-to-adobe-captivate-advanced-actions-01
    Lilybiri is also writing an Advanced Actions Cookbook as well.
    Your specific use case could be handled a number of different ways:
    Have your images on different slides and use an identical button to jump to each slide.
    Use Conditional Advanced Actions and User Variables to check which images have been viewed and then show the next image in a series.  This would allow everything to be done on the same slide but is a more advanced technique that may be beyond your abilities until you are more versed with how variables and advanced actions work.

  • I have an external hard drive that is partitioned three ways. I have made an install disk out of one partition. How can I use this partition, and not the whole drive with bootcamp assistant?

    See title.
    When the drive is plugged in, boot camp assistant says that no installer can be found, but the application doesn't list the three separate partitions like finder/disk util does.
    I am using a mid-'12 retina mac running os X 10.9
    Hopefully this is an easy fix.
    Thanks in advance.

    Hello,
    I have just experienced the same thing!
    Although my external drive shows in Disk Utility, it does not show in Finder.
    And the Verify/Repair buttons are also greyed out.
    Also, although the drive is 2TB. DU shows it as having Total Capacity of only 4.14GB! (Which should be the Free Space).
    I was wondering if you solved your problem, & if so, would you share your solution.
    I´m afraid to Erase in case I lose all my Data on the drive.
    Thanks in advance for your reply!

  • HT204053 how can i use iTune and Apple apps to doenload applications without using credit card or gift cards?

    Hi Team,
    I have brought new iPhone, and was trying to install Skype & other applications. while using itune its asking for review, and then in registration page asking for
    "Credit card' details..
    help me to know the way without credit cards or gift cards.

    If you only want the free apps, take a look here:
    http://support.apple.com/kb/HT2534
    Read the steps carefully as the order in which you follow them is  critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID. 
    You will of course not be able to get anything other than the free apps without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.)
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • How can I use two monitors to increase workspace?

    how can I use two monitors to increase workspace?

    Drag the tabs of any After Effects windows you want to the second monitor.

  • How can I use my iPad and iPhone in Europe without incurring high costs?

    How can I use the iPad to communicate in the Netherlands without incurring huge charges?

    Depends on how you are planning on communicating. If you use Wif, then no. If you are using cellular data, you would need to discuss this with your carrier. We wouldn't know here.
    Cheers,
    GB

  • Why are menus grayed-out in trial version? how can I use the effects then?

    why are menus grayed-out in trial version? how can I use the effects then?

    Every piece of software has a learning curve, and its own terminology.  After Effects is a complex professional tool, used by home enthusiasts right through to feature film makers. 
    There's plenty of very user friendly video editing software that will do the tasks you've mentioned easily.  Might I suggest Adobe Premiere Elements.
    For the record, you can't apply an effect to anything in After Effects until you have selected a target layer in the timeline.  This functionality is true of any video editing or compositing software I can think of,

  • How can I use aperture after receiving the full adobe suite? It won't allow me to use it.

    How can I use aperture after receiving the full adobe suite? It won't allow me to use it. I receive a dialogue box which states previews are not allowed in  aperture and the application is shut down.

    Aperture is Apples version of Lightroom. This has nothing to do with Adobe. Ask on a Apple forum. You won't find many people here using this program.
    Mylenium

  • Hello, i found my lost iPhone and after a while it got automatically erased from find my iPhone. How can i use it again?

    Hello, i found my lost iPhone and after a while it got automatically erased from find my iPhone. How can i use it again?

    Retore the device from your iCloud or iTunes backup.
    iOS: How to back up and restore your content - Support - Apple - http://support.apple.com/kb/HT1766

  • My camera does not work after I restored the system, how can I use it again?

    My camera does not work after I restored the system, how can I use it again?
    Thank you for your help!

    Did try to restore "as new device" without using the backup after that?
    Did you try to reset the phone by holding the sleep and home button until the Apple logo coes back again?

  • I have a short 3d video with a separate black/white alpha pass, how can I use the alpha pass as a mask?

    I have a short 3d video with a separate black/white alpha pass, how can I use the alpha pass as a mask? I want to add a heat wave distortion to the whole video but not on the alpha pass area. How do I set this up?

    Track matte:
    http://helpx.adobe.com/after-effects/using/alpha-channels-masks-mattes.html#track_mattes_a nd_traveling_mattes
    Start here to learn After Effects:
    http://adobe.ly/AE_basics

  • How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes?

    How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes? I wanted my teenager's AppleID to be different from mine so that she couldn't charge stuff to my AppleID, therefore I created me another one. Now when I go to Sync either device, it tells me that this IOS device can only be synced with one AppleID. Then I get a message to erase it, not going to do that, lol. If I logout as one ID and login as the other, will it still retain all synced information on the PC from the first IOS device? If I can just log in out of the AppleID, then I have no problem doing that as long as the synced apps, music, etc stays there for both. I am not trying to copy from one to the other, just want to make sure I have a backup for the UhOh times. If logging in and out on the same PC of multiple AppleIDs is acceptible then I need to be able to authorize the PC for both devices. Thanks for the help. I am new to the iOS world.

    "Method Three
    Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
    This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
    I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

  • HT4901 I have HughesNet with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to backup my information all the time????

    I have HughesNet satellite for an ISP with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to back up my information all the time?

    Thanks Roger W1,
    Yes, I was using iTunes to sync over cable without problems since orinigal purchase in 2011 and using 10.6 w/o problem. There was an "update" in Nov 2012 that crashed the sync service. I went to the Apple Store and reviewed the problem with the Geniuses there. It was discovered at that time that the update included mandated use of iCloud but enough of the un-updated code remained that he was able to patch functions to allow Microsoft Office to still sync over iTunes.
    This March (+/-) there was another "update" to 10.6 that totally destroyed the patch that was in place so there was no sync service available between Microsoft and iTunes what-so-ever. Then recently, because of some unknown process, all my notes, contacts, and calendars were erased in both my Apple utilities and Microsoft utilities.
    After many hours of frustration I was able to recover most of the information to the Apple utilities only, but those were unstable. At my visit to the Apple store it was suggested that an upgrade to 10.8 might solve the stability problem. That it did but being connected to the iCloud all the time keeps using up all my Internet time and I have nothing left to check emails or do research.
    This, to me, is not my problem but one created by Apple. I have searched the Internet and support groups and there doesn't seem to be a solution.
    The "aircraft mode" turns off all other communication functions and is not acceptable. Neither is disconnecting/turning off Airport on my MBP.
    Thanks,
    Jay

Maybe you are looking for