How can I use Airdrop in my iMac which has OX 10.9.2

If you have an iPhone5 and an IMac,
- you should have your photos in phototstream (last 1000)
- your iphone should have your icloud account linked
- your imac should have your icloud account linked
more info http://support.apple.com/kb/HT4486

Similar Messages

I purchased Adobe Illustrator CS2 on CD many years ago and now i have bought a new iMac computer it won't let me install from the CD's. How can i use this product on iMac ?

I purchased Adobe Illustrator CS2 on CD many years ago and now i have bought a new iMac computer it won't let me install from the CD's. How can i use this product on iMac ?

Because the Nano was previous synced to another comuter/iTunes library.
See the following:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

HT4623 how can i use one i5 in oman which is bought from australia?

how can I use my i5 in oman which is bought from Australia?

Hi,
I put new sim card (omantel -prepaid) but some msgs. is came.( The sim card that you currently have installed in this phone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the I phone.Please insert another SIM card from a supported carrier or request that this I phone be un locked by your carrier.Please contact Apple for more information ).

How can i export the data to excel which has 2 tables with same number of columns & column names?

Hi everyone, again landed up with a problem.
After trying a lot to do it myself, finally decided to post here..
I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
Because both the tables have same number of columns & column names.
Below are 2 tables with column names:
Table-1 (MONTHLY_PART_1)
Table-2 (MONTHLY_PART_2)
SL_NO
SL_NO
COMP
COMP
DUE_DATE
DUE_DATE
U-1
U-1
U-2
U-2
U-4
U-4
U-20
U-20
U-25
U-25
Since both the tables have same column names, I'm getting the following error :
Error 402 at line 103, column 4
alias required in SELECT list of cursor to avoid duplicate column names.
So How can i export the data to excel which has 2 tables with same number of columns & column names?
Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
Help me with this please.
Thank You.

You'll have to *alias* your columns, not prefix it with the table names:
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
for rData in cData loop
ERROR at line 18:
ORA-06550: line 18, column 3:
PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
ORA-06550: line 18, column 3:
PL/SQL: Statement ignored
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
PL/SQL procedure successfully completed.
cheers

How can I release (or abort) a download which has stuck at Processing?

I have a music download (which I have been charged for) which has been stuck at Processing for over 10 days.
Unable to cancel or abort from iTune Store. My Music is now locked and unavailable. (VERY frustrating)
Unable to fully open iTune Store as it freezes part way and all I get is the text and boxes with no graphics or interaction
One discussion suggested that my modem may need re-flashing. As it was over 6 years old, I replaced it - but still can't clear the download.

Hi, Philipp,
Thank you very much for your prompt reply and support. The IE icon disappeared immediately after I downloaded MF. I tried to download IE again but without success. In the end all my icons on my start page disappeared, although I do not think this was to do with MF. I had to resort to restoring my lap top to factory settings for the umpteenth time and I have now got IE back but no MF. I will keep your advice and will try again when I am feeling brave enough and have sufficient time to try and download MF again. I am not confident with technical problems and greatly appreciate your help and support.
Kind regards, K.

How can i use office work in iMac?

I want have microsoft work in Imac and relate to my Ipad, which one is the better one should I choise? because it have a lot difference choice in app store

Microsoft Works doesn't run under Mavericks.
Microsoft Office (v 2008 and 2011) run in Mavericks. I think they have just released some iPad versions, but they must be purchased as a subscription service with Office 2013 in order to actually use the programs.
Pages, Numbers, and Keynote can all open, edit Office documents, but they are completely different user experiences from Office. I prefer them due to their clean, simple interfaces, but they won't have all the features you have in Office.
They have iPad versions.
There are also Office alternatives, LibreOffice, NeoOffice, but they don't have iPad versions. They are also not in the App Store (last I checked).

How can I use my Late 2009 iMac as an external monitor with my new MacBook Pro 15" Retina

I want to use my iMac (Late 2009) as an external Display for my new 15" MacBook Pro Retina, I need to know what Cables to use so I can go buy them the Apple Store, I already tried a thunderbolt cable between the two and that doesn't work, but I think this might
iMAC MBP 15" Retina
Mini display Port to VGA adaptor -> VGA Cable -> Mini Display Cable to VGA adaptor
or maybe
Mini Display port to HDMI adaptor -> HDMI Cable -> HDMI Port on MBP
Pleae help I can't seem to figure it out online.
Thanks!

Hello, All-
I too am very interested in the answer to this query. Same set up, same fail w/the Thunderbolt cable. The Genius Bar at the Apple Store was no help & recommended I bring my 27" iMac into the store...seriously? Their ultimate answer was that I needed a plain old male-male mini display port cable....that the Thunderbolt cable was the problem. Bloody unlikely, I say. Another guy in the store agreed with me this morning, so swapped out the cable. I was hoping upon hope it was a bad cable, but no such luck—still nothing. Next I tried a mini-display-port-to-DVI adapter—DVI cable—mini-display-port-to-DVI adapter. This also did not work. Is there a chance that the iMac running Snow Leopard and the MacBook running Mountain Lion is the problem???

How can I use my 24inch 2007 iMac as display for my macbook pro?

My 24 Inch OSX YosemiteiMac has mini display port and my OSX Yosemite Macbook Pro has a thunderbolt port.
Is this possible?
Thanks!

Use a product such as ScreenRecycler over a network.
(125440)

How can i use the maps in language which different...

i do use the phone in English interface. but to navigate in the Middle East is very hard because the spelling of the names of the street is so different. So better to navigate in Arabic. when i switched the phone to Arabic the maps switch too. but i wish if there is anyway to keep the phone in English and the map in Arabic ..... any ideas ??!!!

If you are referring to the displayed names, then no - this is determined by the phone language settings, but if you are referring to voice guidance then it's as easy as pie - the Maps voice guidance language is not linked to the UI language, you can download voice files to the phone using either Map Loader or Ovi Suite, then you just need to go in Maps to Options>Tools>Settings>Navigation>Voice guidance and select Arabic.
It is also possible to download the voice files directly to the phone, though the download is likely to be several megabites so beware if you are using a chargeable connection. Simply make sure that Maps is online (Options>Tools>Go online) then select the Arabic language as I guided above and it will ask you to confirm that you want to download the voice files and then do it.
The very latest Maps version, 3.03, also includes a new feature to read out the street names, so instead of just "In 100 metres turn right", it would say "In 100 metres, turn right into High Street"; but unfortunatelty this new feature is only so far available in a small number of languages and Arabic is not yet one of those.

How can i use cmr between two EJB which are belong to different database?

Perhaps, on the EJB's Entity tabs, in the Deployment settings dialog, you could make sure each bean references a different DB (Change the JNDI name, under Database settings).
However, I don't know this for sure - you may have to use bean-managed persistence.

How can I get back my internet explorer which has been removed when I have downloaded Mozilla Firefox?

I want to download Mozilla Firefox as an optional browser as I can only access a website for work through this browser. However, when I downloaded MF, even though I tick that I do not want it as my default browser or homepage, it downloads, but has removed my Internet Explorer connection. This has happened a couple of times now and is very frustrating. I don't know how to get my IE back and keep the option of MF available. MF seems to automatically delete/remove IE when it is downloaded. I am using Windows 8. I would appreciate help and advice to correct this situation. Many thanks.

Hi, Philipp,
Thank you very much for your prompt reply and support. The IE icon disappeared immediately after I downloaded MF. I tried to download IE again but without success. In the end all my icons on my start page disappeared, although I do not think this was to do with MF. I had to resort to restoring my lap top to factory settings for the umpteenth time and I have now got IE back but no MF. I will keep your advice and will try again when I am feeling brave enough and have sufficient time to try and download MF again. I am not confident with technical problems and greatly appreciate your help and support.
Kind regards, K.

Can I use a 1 TB EHD which has an iPhoto library on it for Time Machine backup?

Or do I need a separate EHD for that? I'm trying to make an ancient 2008 MBP (running OS X 10.6.8, 2.5 GHz Intel Core 2 Duo, 2 GB 667 MHZ DDR2 SDRAM) last me for another 6-9 mos. With my hard drive about full I ordered an EHD and copied my iPhoto library to it before deleting events on iPhoto on my computer. This freed up 95 GB of space. I hate to admit that I've never backed up my computer.
Thanks for your help.

Hi,
you can use the drive with Time Machine while still using the drive as a normal disk. Be careful however, that if the external drive dies for a reason, your photos will be lost forever.
The best would be to set Time capsule on a secondary hard drive, and asking Time Capsule to backup as well your 1st drive, which contains the iPhoto library.
That way you'll have 2 full versions of your data
Thank you for using Apple Support Communities.
All the best,
James

How can I use ipad 2 in India?which was bought in US.

how can I use iPad 2 in india,which i bought in US? It is a cdma,not sim card

Probably not, unless India is one of the very few places that don't use GSM.

How can I use Aperture 3 on my new iMac with Maverick?

How can I use Aperture 3 on my new iMac with Maverick?

Do you own a copy of Aperture, perhaps bought for another Mac?
If you have not bought Aperture, you need to buy it from the AppStore.
But if you own Aperture and have it bought from the AppStore on another Mac, sign into theAppStore on your new iMac with the same AppleID you used to buy Aperure on your other Mac. Then look at the "Purchased" tab of he AppStore. It show Aperture, with the "Install" button to the right. Simply press the "Install" button and download it to your new iMac. Or if you have bought Aperture on a CD/DVD, run the installer from the CD/DVD on your new mac and immediately run software update to upgrade the Aperture 3. version to version that will run with Mavericks.
Léonie

How can I use microsoft word, power point and those apps in my new iMac ? i bought this iMac yesterday so am new on tho and i would like to know

how can I use microsoft word, power point and those apps in my new iMac ? i bought this iMac yesterday so am new on tho and i would like to know

If you absolutely must have the Microsoft applications, you can purchase and download them from http://microsoft.com/mac.
Free software suites LibreOffice and OpenOffice offer similar functionality (word processing and spreadsheets).
Or you could do worse than look at Apple's Pages, Numbers and Keynote, which should already be installed in your Mac and can export to Microsoft formats if need be.
Matt

How can I use Airdrop in my iMac which has OX 10.9.2

Similar Messages

Maybe you are looking for