How can I use airplay if my receiver does not have the small audio jack?
I have a harmon kardon receiver for surround sound, but it does not have the small audio input jack to hook to my small apple airplay. Any ideas? should I just us the LAN plug from my receiver to airplay and try to connect itunes to it?
Or, can I just attach an old ipod to the stereo and leave it there as a hard drive for my itunes?
Thanks!
You will need a cable similar to the link below.
Mini Jack on one end and a pair of RCA jacks on the other.
http://store.apple.com/us/product/HA832ZM/A/belkin-rca-stereo-cable-2-m66-ft?fno de=72
These can be purchased at Wal-Mart etc. for about $6
If you have an Apple Airport Express, that is what you need.
Similar Messages
-
HT4623 how can i update my iphone 4 that does not have the update option in the settings?
How can i update my iphone 4 that does not have the update option in the settings?
From the article you linked, scroll down to the section "Update your device using iTunes"
-
How can I use a COM object that does not have a type library?
Hello,
I've created a com server in python for which I do not have a type library. I am able to call functions for this application in Python, TCL, I'm sure VB, etc. without the type library.
Must I have a type library registered to use this COM object with Labview? I was hoping I could simply supply the name to the refnum (or the GUID) then call functions by passings strings to the invoke node. This does not seem to be possible - am I missing something?
In the event that I cannot use a com server without a type library. Any recommendataions on how to create one? I'm wondering if I can use the same GUID and create a shell in LabWindows which generates the IDL/TBD file I need for Labview to see my
com server.
Any help is greatly appreciated.
73,
TimothyTimothy Toroni wrote:
> Thanks for the info, however their example is labview server and
> python client. I'm going the other way. It's good to know about
> LabPython though...
>
> As of now, it seems to be there is no way to use a COM object without
> a type library from inside LabView.
Yes that is true. LabVIEW needs that to configure the Property and
Methode Nodes correctly. Otherwise it would need to have a special
Property and Method Node with a configuration dialog similar to the Call
Library Node, but a LOT more complicated. Not sure many people could
make use of that, and it would be a very tiring experience trying to get
things setup in that way, by going through the edit, test, and crash
cycle over and over again.
Rolf Kalberm
atter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.
You must remember the code, if you can't then take the phone and proof of purchase to an Apple Store.
-
HT201303 how can i recover my lost iphone which does not have tracker
how can i recover my lost iphone which does not have tracker.. plz plz help..
You would have to do as you would if you lost any other item. Look for it.
There is no way to track it without find my iphone. -
Also, if I buy Lion OS, will it be back or no?
If you don't have an Installer disk then you can't install without a purchase. Do you have the grey SystemRestore disks that came with your Mac? It's on that. No, iPhoto is not part of Lion.
Regards
TD -
I do not have a credit card to get through to the itunes store. I do have an itunes gift certificate. How do I use this if I cannot get through the ID part to redeem my gift card? Thanks
Hi cstafford84,
Thanks for visiting Apple Support Communities.
If you have not logged in to the iTunes Store before, first follow the steps in this article to create your account without providing a credit card:
Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534
Next, use the steps in this article to redeem your gift card:
Redeeming iTunes Gift Cards and download codes
http://support.apple.com/kb/ht1574
All the best,
Jeremy -
How can i use my music, even if is not in the apple store, with itunes match?
i want to listen Ac/Dc on my iphone. i loaded my music, i use itunes match, and on the cloud, it doesn't load my library, as i want. because, doesn't correspond to the store. so, i have to switch off my itunes match, to listen the album Back in Black....
so, which is the sense, to block people to their music? just because is not in the store?
thxWacks Mendez-
The Apple support community is a User to User forum. Apple makes no promise to read these postings, and NEVER responds here.
I guess there are not a lot of readers from the Phillipines who can answer your question.
You should try contacting the support numbers for the Phillipines and ask them if there is anything you can do.
http://www.apple.com/asia/contact/ -
what do i do if i want to use a portable hard drive for backing up, if i also see
the time machine also on there?flora1917 wrote:
what do i do if i want to use a portable hard drive for backing up, if i also see
the time machine also on there?
Do you mean you're already backing-up to a Time Capsule, and want to switch to using an external HD? If so, just format the drive and select it via Time Machine Preferences > Select Disk. See #21 in Time Machine - Frequently Asked Questions.
If you mean something else, please clarify. -
How can i track my ipod but i do not have the moblie me i just have yahoo and the tracking on?
??
What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
Reporting a lost or stolen Apple product
What-To-Do-When-Iphone-Is-Stolen
Lost or Stolen iPhone? Here’s What to do.
6 Ways to Track and Recover Your Lost/Stolen iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
Find My iPhone
Setup your iDevice on MobileMe
OS X Lion- About Find My Mac
How To Set Up Free Find Your iPhone (Even on Unsupported Devices) -
I have an older Power Mac desktop computer. I do not believe it has the hardware to connect wirelessly to my wireless network. The computer is located on the 2nd floor of my house where there are no ethernet network connections so I would have to use wireless to connect to the internet. I have a wireless LinkSys router downstairs that I use to create my wireless network. I also have a Time Capsule upstairs but without the ability to plug an ethernet network cable into it, I cannot use it to get internet access t the computer.
What hardware can I add to give me the abiity to connect the Power Mac to my wireless network?
Is there a way perhaps to link routers? IE. Can I somehow have my existing wireless router downstairs connect wirelessly with the Time Capsule upstairs that i could then plug the Power Mac into for connectivity?
Not sure what version of OS this computer is currently using but do know it does not have the newer dual Intel processors. As such I am unable to update to newer OS versions.While uselessSABOTAGE's advice is great, in case of future issues, it would helps us in the future if you would post accurate tech specs of your model iMac.
You info states you have an older IMac PowerMac, but is also says your OS X version is OS X 10.7.2.
This is not possible. OS X 10.7.2 Lion only runs on Intel CPU Macs.
Please, go up to the Apple symbol in the upper top left of OS X main menu bar. Click the symbol. Then click About this Mac. A popup window appears that gives some basic info. Then, click the More Info button and both post your iMacs complete specs by selecting/highlighting all of the info and copy paste this into a reply to this post, editing out your iMac's serial number. Then update the info you posted in your user profile with some of this new found data for future postings. -
i want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone!
Download AirPlayer for Mac - Transforms your Mac into an AirPlay-compatible display. MacUpdate.com
-
I bought a used i pod 4 for my daughter and it does not have the message icon on it ( not even in settings) how can I get the message icon on it so it can receive and send messages
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
HT201343 how can i use airplay in my MacBook Pro late 2008?
Somebody can tell me how can i use AirPlay on my MacBook Pro late 2008?
On your MacBook: Apple Menu > System Preferences > iCloud > place a checkmark in front of Contacts
On your iPhone: Settings > iCloud > turn Contacts to on -
HT5437 How can I use apple TV to connect my computer to the tv screen as an external monitor?
How can I use apple TV to connect my computer to the tv screen as an external monitor?
Morning jotref,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
About AirPlay Mirroring in OS X Mountain Lion
http://support.apple.com/kb/ht5404
Best of luck,
Mario
Maybe you are looking for
-
Group Headers are not getting displayed in crystal report
Hi, I have got 1 reprot having 8 subreports in it. In the parent report I group by 2 different fields. I have created 8 diff. sections under 2nd group and put every subreport in different section. The data in subreport gets displayed depending on the
-
STAD Not showing data in CRM 5.0
DEar Firends, We upgraded CRM from 4.0 to 5.0 , but when we execute STAD Transaction code and puting i/p for yesterday or today or 10 day before then it show screen but without any record. So how can i achived statistic record. reply. Thanks, Rd, Sac
-
I don't know what happened, but I've had my iMac for a week and after the first 3 DVD's I've played, I don't have audio anymore. I deleted the plist file but that didn't work. The only way I can watch a DVD is through DVD player.
-
I have so many pictures on my Mac book pro on aperture that I can not put anymore on. If I put them on a hard drive h Then how do I access them like a library?
-
Access violation with iisforward.dll
I am trying to connect to weblogic through iis4.0. Have installed the iis plugin correctly. I can proxy by extension correctly but need proxying by path. When i register the isapi filter iisforward.dll, I get a access violation and the inetinfo.exe c