How can I use an advanced action to show a sequence of images by clicking on a single button?

I'm trying to make Captivate 7 project where I have several slides where images are revealed one after the other. I wanted to insert a button along the lines of click here for next image but can't work out how to write the script for it. The Adobe information is next to useless and I can't find anything which breaks down these processes from scratch. Any help appreciated!

You're a little early but help is on the way. There are a couple of new e-books being written about using Advanced Actions.
One of them is currently available as a discounted pre-release here:
http://www.infosemantics.com.au/e-books/guide-to-adobe-captivate-advanced-actions-01
Lilybiri is also writing an Advanced Actions Cookbook as well.
Your specific use case could be handled a number of different ways:
Have your images on different slides and use an identical button to jump to each slide.
Use Conditional Advanced Actions and User Variables to check which images have been viewed and then show the next image in a series. This would allow everything to be done on the same slide but is a more advanced technique that may be beyond your abilities until you are more versed with how variables and advanced actions work.

Similar Messages

How can I use the open in " My application" option to open image attachments.?

How can I use the open in " My application" option to open image attachments.?
I am trying to use the uti's given in the apple docs but just unable to do it however its working perfect for pdf and rtf files.
please help needed urgent.

Perhaps you should Contact the iTunes Store Customer Service:
Apple - Support - iTunes Store - Contact Us

How can i use PCIe 1433 and basler line camera to construct image and pocess it?

hello! every one ,I am new to machine vision.i have two problems to ask.First,how can i use line camera and 1433 to acquire 2-D image?second,if i want to pocess the 1-D signal ,how can i do it ?i expect for your answer ,thank you!

What you are trying to do is not something you can easily do in a forum, but I can give you the basics.
You have a CameraLink frame Grabber (PCIe 1433) and a LineScan Camera
The framegrabber needs to be configured to understand how to communicate with the camera. You need a file from the camera vendor. This file might already be installed. You can use MAX to check if it is, under Devices/IMAQ.
Assuming you can get to the point where you can communicate with the camera, you need to configure your acquisition.
Since the camera is a line scan camera, it captures image data one pixel ine at a time. You will need to configure the frame grabber to determine how many lines per image you want. The low limit is usually 1, and the high limit is either based on the framegrabber's internal memory, or that of the computer.
If you are using labview, you will need to open a sessing to the camera, acquire the image(s), and then close the session when you are done.
Once the image(s) are captured, you can performa analysis using the NI Vision Toolkit.
Sorry, but there is no way to condense years into one post.
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions

How can we Use 0302 Additional Actions

Hi How can we use Additional actions IT - 0302......
My Scenario is one particular day can we use Two actions.........If can how can we use through Infotype 0302
(additional Actions)
Regards

Hi Srinivas,
In T77S0 -
> ADMIN EVSUP switch = 1
SPRO-->Personnel Management -> Personnel Administration->Customising procedures-->
Actions -
> Set up personal actions -
> Activation Additional actions
Regards,
Darshan Mulmule

How can I use After Effects filters on a whole sequence without getting stuck in After Effects?

It appears that, with the options that are visible to the user, Dynamic Link only goes one-way and can't make round trips from Premiere Pro to After Effects and back again. If I send a sequence to After Effects, that part works fine and I can do what I want and save the comp. However, even though the comp appears as an asset in Premiere Pro, I am not allowed to do anything with it. If I try to drag it to a new sequence, it just says no. If I click "Create Sequence from Clip" it creates an empty sequence.
So how can I use After Effects on whole sequences/tracks instead of just on a clip-by-clip-by-clip-by-clip-by-clip basis? is this possible? For instance, if I have a whole sequence where I've neutralized the white balance, I might want to apply a warming filter to the whole thing as a unit. That would be really painful with even a few clips to keep doing that again and again, and if you want to modify it slightly you have to do it over and over. If there is a way to do that through Dynamic Link through some hidden option, what happens with the audio? Would I have to cut it out of the lower sequence and paste it into the higher sequence with the After Effects comp as a video track?

I'm not an Adoby guy, hence you may ignore my reply, but Adobe Dynamic Link is obviously not just one way ticket and in most cases works just fine.
You have already been explained by J-MS and tclark513 how to properly use it and which pitfalls may occur.
So as to apply an effect onto a whole sequence or a group of clips you need to either nest them in PrPro or pre-compose them in AE. Then just apply an effect (or several ones) onto that composition.
So, if you nest clips in PrPro, select your nested sequence in the timeline, right-click and choose 'Replace with After Effects Composition'. Done! Your dynamically linked AE composition is in the right place in your timeline and in your Project panel as well. If you can not treat it as an ordinary footage, there are obviously some mistakes in your workflow.
If you didn't nest your sequence or a group of clips in PrPro before replacing them with AE composition, you may easily do it within AE. Just select all the layers in AE composition and choose Layer -> Pre-compose... (Ctrl/Cmd+Shift+C) Done! Switch back to your Master comp and apply your desired effect(s)
You may loose some effects or/and transitions while travelling from PrPro to AE via Adobe Dynamic Link, whereas you don't while travelling back
(If you start building your AE composition from scratch right in AE and then need to import it into PrPro, DO NOT export one as PrPro project out of AE, but rather choose Adobe Dynamic Link -> Import After Effects Composition... within PrPro)
P.S. And yes, submit a feature-request so that Adobe will convert 'Transparent Video' into fully functional 'Adjustment Layer'.

How can i using MDT 2010 to deploy multiple partitions Windows 7 image?

Hello,
I am planning using MDT as a deploy windows 7 solutions. My Windows 7 is setup on parition 1 "C:" and users profile on parition 2 "D". I am already capture WIM for each paritions. How can i using MDT 2010 to deploy multiple partitions for Windows 7
image? together
Thanks

Having the users folder on a separate partitions is a bad idea because the Windows Setup was not really designed for it, it's more of a afterfix. In addition to that the deployment solutions in general have problem dealing with multiple partions.
Put it this way - The big warning text in the WAIK documentation about redirecting the users folder to another drive is there for a reason. It will break future offline servicing.
It doesn't mean it can't be done, it just means it will take you three times (at least) longer to setup/troubleshoot your deployment solution, and you will be in a world of pain the next time you want to re-image the machine.
This quote from a good friend of mine (Andreas Hammarskjold) describes it very well:
Generally I would always recommend to only have ONE partition these days. Going down the route of making multiple partitions is like having multiple wives/girlfriends/lovers… it’s all fun and games for a while but ends with disaster
- Andreas H.
/ Johan
Regards / Johan Arwidmark Twitter: @jarwidmark Blog: http://www.deploymentresearch.com FB: www.facebook.com/deploymentresearch

How can you use AirPlay Mirroring to always show one of your open desktop screens?

I have Mountain Lion on a 2011 Mac, and have a number of desktop screens which I use regularly.
My question is, how do I choose only one of those open desktop screens to beam to Apple TV via mirroring? For example, so that I can show a presentation on the projector screen (via Apple TV) and read the slide notes directly from a word document on the Mac screen (which the audience cannot see) or for example, to beam a full screen DVD to my TV so that the family can watch it, whilst I continue to actually work on the Mac on a different desktop screen?
Hope that makes sense...
Thanks
Jonathan

I understand your problem but don't think it's possible:( My only solution is to play my tutorials from the networked drive to my ATV2 while following along with the exercise materials. If you've found a solution please let me know? I thought it'd be possible to assign mirroring to one desktop, like I think you said in the original post, with some type of terminal command but no luck yet. Thanks

How can I use QT pro automator actions in Mountain lion?

I am using mountain lion with 2012 late iMac and recently I bought QT pro.
And I try to use automator actions with QT pro, but there are only actions for QT 10 player.
How can I use QT pro actions in automator?

I have the exact same problem.
I have an US keyboard but when I press the button with tilde I get this: § or this ±
This looks like british keyboard to me

How can I use wget, cron and Automator to periodically pull a dynamic image from a URL to local storage, and then update a Keynote slide with that image, automatically?

How can I use wget, cron and Automator to periodically pull an image from a URL (which is dynamically updated - like a weather map, say - to local storage, and then update a Keynote slide with that image, automatically?

Any particular reason for those specific technologies? wget does not exist on a mac, although you can nstall it I guess. OS X has curl installed which should do pretty much anything you want to do with wget. cron is being replaced by launchd, although cron still exists on mountain lion.
As far as I can tell from automator all the standard 'actions' to access keynote available to it require keynote to be open and running, but does not provide a function to actually open it. So I think you will have to write some applescript, as a minimum to open and quit keynote. I notice that the keynote actions are mostly circa 2005 an wonder if they would even work.
Under utilities in automator 'actions' there is a capability to add applescripts as part of the workflow.
Also, note that cron is being dprecated by Apple and replaced by launchd. that said cron is stil on my mountain lion instalation.
This entry at stackoverflow shows use of cron with curl to get web urls. http://stackoverflow.com/questions/1683620/getting-started-with-cronjobs-on-a-ma c
If I have any time I may try and get this to work as it is quite interesting and new to me. But otherwise, good luck.

The option "tell websites I do not want to be tracked" is missing from the Options Window/Advance/General/Browsing. How can I use the feature I do no want to be tracked by websites?

The option "tell websites I do not want to be tracked" is missing from the Options Window/Advance/General/Browsing. How can I use and find the feature: I do no want to be tracked by websites? I am using Windows Vista, Firefox 8.0.1

That option has been moved to the Privacy tab in Options (first item).
*See --> https://support.mozilla.com/en-US/kb/how-do-i-turn-do-not-track-feature
*Do Not Track is voluntary; the site you are visiting must honor your request to not be tracked --> https://www.eff.org/deeplinks/2011/02/what-does-track-do-not-track-mean
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How can i use JSTL inside custom tag attribute

Hi,
I have one button tag which displays the button with round corner. I will show the button like this:
<ep:button key="buttons.submit" name="submitBtn" styleClass="But"
          onClick='submitPage(''<c:out value='${buttonName}' />)' />
I am getting the problem with the above code. how can i use JSTL inside the custom tags.
Thanks in Advance,
LALITH

No. The details are given below:
I have included the follwing line in web.xml file:
<taglib>
    <taglib-uri>/tags/button</taglib-uri>
    <taglib-location>/WEB-INF/button.tld</taglib-location>
</taglib>button.tld file
<taglib>
     <tlibversion>1.0</tlibversion>
     <jspversion>2.0</jspversion>
     <shortname>button</shortname>
     <tag>
          <name>button</name>
          <tagclass>com.ksi.ep.web.taglib.ButtonTag</tagclass>
          <bodycontent>empty</bodycontent>
          <attribute>
               <name>name</name>
               <required>true</required>
               <rtexprvalue>false</rtexprvalue>
          </attribute>
          <attribute>
               <name>key</name>
               <required>true</required>
               <rtexprvalue>true</rtexprvalue>
          </attribute>
          <attribute>
               <name>onClick</name>
               <required>true</required>
               <rtexprvalue>true</rtexprvalue>
          </attribute>
</taglib>ButtonTag.java :
public class ButtonTag extends TagSupport {
   private static final long serialVersionUID = 6837146537426981407L;
     * Initialise the logger for the class
    protected final transient Log log = LogFactory.getLog(ButtonTag.class);
     * holds the Value of the button tag
    protected String onClick = null;
     * holds message resources key
    protected String key = null;
     * The message resources for this package.
    protected static MessageResources messages =
                         MessageResources.getMessageResources
                                   ("ApplicationResources");
      * (non-Javadoc)
      * @see javax.servlet.jsp.tagext.TagSupport#doStartTag()
     public int doStartTag() throws JspException {
        StringBuffer label = new StringBuffer();
        HttpServletRequest request = (HttpServletRequest)pageContext.getRequest();
        try {
               log.debug("in doStartTag()");
               Locale locale = pageContext.getRequest().getLocale();
             if (locale == null) {
                 locale = Locale.getDefault();
             log.info("");
             label.append("<a border=\"0\" style=\"text-decoration:none;color:#FFFFFF\" href=\"JavaScript:");
             label.append(onClick);
             label.append("\" >");
               label.append("<table onClick=\"");
               label.append(onClick);
               label.append("\" ");
               if(onmouseout!=null && !"".equalsIgnoreCase(onmouseout))
                label.append(" onmouseout=\"");
                label.append(onmouseout);
                label.append("\" ");
               if(onmouseover!=null && !"".equalsIgnoreCase(onmouseover)){
                label.append(" onmouseover=\"");
                label.append(onmouseover);
                label.append("\" ");
               if(title!=null && !"".equalsIgnoreCase(title)){
                label.append(" title=\"");
                label.append(title);
                label.append("\" ");
               label.append("style=\"cursor:hand\" tabindex=\"1\" border=\"0\" cellpadding=\"0\" cellspacing=\"0\" background=\"");
               label.append(request.getContextPath());
               label.append(System.getProperty("file.separator"));
               label.append("images");
               label.append(System.getProperty("file.separator"));
               label.append("background1.jpg\" > ");
             label.append("<tr><td width=\"10\"><img border=\"0\" src=\"");
             label.append(request.getContextPath());
               label.append(System.getProperty("file.separator"));
               label.append("images");
               label.append(System.getProperty("file.separator"));
             label.append("leftcorner.jpg\" ></td> ");
             label.append("<td valign=\"middle\" style=\"padding-bottom:2px\"><font color=\"#FFFFFF\" style=\"");
             label.append(styleClass);
             label.append("\">");
             label.append(messages.getMessage(key));
             label.append("</font></td>");
             label.append("<td width=\"10\" align=\"right\"><img src=\"");
             label.append(request.getContextPath());
               label.append(System.getProperty("file.separator"));
               label.append("images");
               label.append(System.getProperty("file.separator"));
             label.append("rightcorner.jpg\" border=\"0\" ></td>");
             label.append("</tr></table></a>");
             pageContext.getOut().print(label.toString());
          } catch (Exception e) {
               log.error("Exception occured while rendering the button", e);
               throw new JspException(e);
        return (SKIP_BODY);
     * Release all allocated resources.
    public void release() {
        this.name=null;
        this.key=null;
        this.onClick=null;
}In my JSP I have mentioned the taglib directive as
<%@ taglib uri="/tags/button" prefix="ep"%>and
<ep:button key="buttons.submit" name="submitBtn" styleClass="But"
     onClick='overwritePreApprovals('<c:out value='${transactionalDetails['inPrepList']}' />')' />Servlet.service() for servlet action threw exception
org.apache.jasper.JasperException: /pages/pms/coordinator/Dashboard.jsp(325,48) Unterminated <ep:button tag
Thanks,
LALITH

How can I use a 3rd party XML parser such as xerces with OC4J ?

Hi all tech experts,
I am using Oracle Application Server 10g Release 2 (10.1.2) and i have
installed Portal and Wireless and OracleAS Infrastructure on the same
computer.
i tried all the solutions on this thread
Use of Xerces Parser in out application with Oracle App Server 9.0.4
but still fighting.
I have also posted this query on OTN on following thread
How can I use a 3rd party XML parser such as xerces with OC4J?
but no reply....
Please help me on this issue.
Since OC4J is preconfigured to use the Oracle XML parser which is xmlparserv2.jar.
i have read the following article which states that
OC4J is preconfigured to use the Oracle XML parser. The Oracle XML parser is fully JAXP 1.1 compatible and will serve the needs of applications which require JAXP functionality. This approach does not require the download, installation, and configuration of additional XML parsers.
The Oracle XML parser (xmlparserv2.jar) is configured to load as a system level library of OC4J through it's inclusion as an entry in the Class-Path entry of the oc4j.jar Manifest.mf file. This results in the Oracle XML parser being used for all common deployment and packaging situations. You are not permitted to modify the Manifest.mf file of oc4j.jar.
It must be noted that configuring OC4J to run with any additional XML parser or JDBC library is not a supported configuration. We do know customers who have managed to successfully replace the system level XML parser and the Oracle JDBC drivers that ship with the product, but we do not support this type of configuration due to the possibility of unexpected system behavior and system errors that might occur from replacing the tested and certified libraries.
If you absolutely must use an additional XML parser such as xerces, then you have to start OC4J such that the xerces.jar file is loaded at a level above the OC4J system classpath. This can be accomplished using the -Xbootclasspath flag of the JRE.
i have also run the following command
java -Xbootclasspath/a:d:\xerces\xerces.jar -jar oc4j.jar
but no success.
How could i utilize my jar's like xerces.jar and xalan.jar for parsing instead of OC4J in-built parser ?
All reply will be highly appreciated.
Thnx in advance to all.
Neeraj Sidhaye
try_catch_finally @ Y !

Hi Neeraj Sidhaye,
I am trying to deploy a sample xform application to the Oracle Application Server (10.1.3). However, I encountered the class loader issue that is similar to your stuation. I tried all the three solutions but the application is still use the Oracle xml paser class. I am wondering if you have any insight about this?
Thanks for your help.
Xingsheng Qian
iPass Inc.
Here is the error message I got.
Message:
java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
Stack Trace:
org.chiba.xml.xforms.exception.XFormsException: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.initModels(Unknown Source)
     at org.chiba.xml.xforms.Container.init(Unknown Source)
     at org.chiba.xml.xforms.ChibaBean.init(Unknown Source)
     at org.chiba.adapter.servlet.ServletAdapter.init(ServletAdapter.java:153)
     at org.chiba.adapter.servlet.ChibaServlet.doGet(ChibaServlet.java:303)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Instance.iterateModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.initializeModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.init(Unknown Source)
     at org.chiba.xml.xforms.Initializer.initializeBindElements(Unknown Source)
     at org.chiba.xml.xforms.Model.modelConstruct(Unknown Source)
     at org.chiba.xml.xforms.Model.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.dispatchEvent(Unknown Source)
     at org.apache.xerces.dom.NodeImpl.dispatchEvent(Unknown Source)
     ... 18 more

How can I use iCloud-keychain if i can not find my country in the country code list?

How can I use iCloud-keychain if i can not find my country in the country code list?

Welcome to the Apple Community.
If your country code does not appear in the list…
Go to System Preferences > iCloud > Keychain and enter your Apple ID password (Settings > iCloud > Keychain, from a mobile device)
Select the ‘Create Different Code’ option. (Mobile devices only)
Select the advanced option and choose whether to create a random code or no code, selecting the later allows syncing across devices but not with Apple’s servers.

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How can I use the Rownum/Customized SQL query in a Mapping?

Hi,
* I need to use a Rownum for populating one of the target field? How to create a mapping with Rownum?
* How can I use an Dual table in OWB mapping?
* Can I write Customized SQL query in OWB? How can I achieve this in a Mapping?
Thanks in Advance
Kishan

Hi Niels,
As I'm sure you know, the conundrum is that Reports doesn't know how many total pages there will be in the report until it is all done formatting, which is too late for your needs. So, one classical solution to this problem is to run the report twice, storing the total number of pages in the database using a format trigger, and throwing away the output from the first run when you don't know the total number of pages.
Alternatively, you could define a report layout so that the number of pages in the output is completely predictable based upon, say, the number of rows in the main query. E.g., set a limit of one, two, ... rows per page, and then you'll know how many pages there will be simply because you can count the rows in a separate query.
Hope this helps...
regards,
Stewart

How can I use an advanced action to show a sequence of images by clicking on a single button?

Similar Messages

Maybe you are looking for