How can I use an anchor to show a specific panel in a widget?

I'd like to use a hyperlink from one page to show a specific panel in another page. I did get it to 'somewhat' work when I placed the anchor on the tab of the presentation widget panel I wanted displayed, but it also scrolled the page down to that tab, which hid half the page. Might be confusing to users as it was confusing to me. I then moved it to the top of the widget panel, which didn't work at all - unless I clicked the tab of the panel. Then it scrolled the page to the point where the anchor was placed. Not cool.
Is there a way to attach an anchor to a page and have it display a specific panel in a widget, without scrolling the page? Or another way to define the page in the widget (if not using an anchor) to send the user to that page in the widget? What I'm hoping is I can either place anchors to widget panels on the page (and not let the page show) or use some other method to take users to that page & panel without using anchors.
I could, I suppose, move the content out of panels and into seperate pages, but I don't want to cry 'uncle' just yet.
Suggestions? Solutions? My inquiring mind wants to know!

I'm afraid that it is not possible at this point of time in Muse. I would recommend that you add this to the ideas section over here, http://forums.adobe.com/community/muse/ideas
Workaround: Create different pages, each with a tabbed pannel containing a different first tab and then link the hyperlinks to the appropriate page.
- Abhishek Maurya

Similar Messages

  • How can I use more lines to show a field of a row in a report?

    How can I use more lines to show a field of a row in a report? Table A have two columns: (c1 number(5),c2 varchar2(1000)).When I show the table on a report,the column c2 show itself in one row.So the width of html page is very wide.How can I split the field c2 to many lines?
    Thanks for any help.

    I was wondering if an answer was found for this one.
    I have the same problem using the default "Look 4" template for the region. I have found in the CSS file where it is defined and it specifies "nowrap" in the style, which is why the long value is not being split over multiple lines.
    So, my question is, without modifying or creating templates, is there a way to override the "nowrap" attribute from within the item definition? e.g. in the Column Attributes.Column Formatting.CSS Style field. I had some success changing the display properties, such as background colour and font size but I can't seen to override the nowrap attribute!

  • How can i use two channels to show different voltages in DAQ ?

    my problem is that when i choose different channels to read the outputs from my sensors, it ignores the channels which i have choosen 0 or 1 and it puts 0 channel only for both sensors. and the result is one same reading at both output guages, one reading is steady and the other is fluctuating. how can i make it recognize each one differently, is the proplem at my programme ? help me please
    Attachments:
    fin.vi ‏58 KB

    Greetings,
    AI Waveform Scan.vi and AI Sample Channel.vi each have a Channel(s) input. You do not have anything wired to these inputs. By default, these inputs are both Channel 0. You should wire "0" to one of these inputs and "1" to the other.
    Good luck with your application.
    Spencer S.

  • How can I use existing anchor point as a new one?

    Can anyone help?
    I'm tracing over a drawing, and I'm trying to use an existing anchor point as an anchor point for another curve. So, from c, I want to click and drag on anchor point b to make a new curve. If I click where b is, then I just delete b. Can I make b my initial anchor point so that I can use it to complete my tooth? When I get to the next teeth Ill have to do the same thing. Has anyone any ideas?

    > Each tooth should be a closed path.
    Why?
    > If I click where b is, then I just delete b.
    Ugh, turn off Auto Add/Delete Anchor Point and watch your rage levels instantly decrease. You can then put your final point anywhere you want, including smack dab on top of B.

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.

    How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.
    the computer:Mac Pro, Mac OS X (10.9.5), 2 x 2.66 Ghz 6-Core intel Xeon
    the TV: LG Smart tv

    The Mac uses a highly-parameterized universal Driver for every display. The parameters are set at certain times when a query is sent to your display. The display MUST answer with its name and capabilities, or the screen stays dark. A TV set that is off or "not paying attention" because it is set to a different port when the query occurs will rarely answer, and so will often remain dark.
    You can use tools in the System Report to see whether your display has been detected at all. If it has, the report will look something like this, but its name will appear:
    The times when the query is sent are:
    • at Startup
    • at wake from sleep
    • when the Mac-end of the cable is inserted
    • when using the Option ( Detect Displays ) button in displays preferences

  • How can I use the color adjustments interface that shows up for camera RAW on jpeg files?

    How can I use the color adjustments interface that shows up for camera raw on other files types? The HLS controls had the secondary color adjustments (6 colors instead of the 3). Plus, it had same vibrancy and a better Curves interface. Yesterday was the first time I imported raw into Photoshop CS5 and I got that really cool interface. What is that? Can I use that on other file formats?

    Actually I am using the Tradional Chinese Version, when I try to edit the jpg file with camera raw, the system shows that there is no camera raw plug-in. The cmaera raw never work.

  • When using iMessage how can I make it so it shows my number not my Apple ID?

    When using iMessage how can I make it so it shows my number not my Apple ID?

    SETTINGS - MESSAGES - RECEIVE AT - CALLER ID (select your number, instead of your email address)

  • How can I use anchor points in Photoshop CC?

    I'm using a trial version of Photoshop CC and I am trying to put a formed border around some text. I was able to do this with my other Photoshop program with manipulating anchor points. The CC version is layed out differently. How can I use and form anchor points?

    Hi Sheryl.  I must admit, I looked at your post earlier, and it was too obscure to get a handle on (did I really just say 'handle'? ).  But I think I can see where you are coming from now.  Yes, the manipulation of paths has changed a wee bit with CC, but it is pretty intuitive, and a lot of it will still work fine using your old methodology.
    Take a look at some of these Julieanne Kost blog posts
    https://blogs.adobe.com/jkost/tag/path-selection-tool
    I find the most reliable way to make individual point selection work first time every time, is to select the Direct Selection tool > and with the shape/path layer selected, drag a tiny marquee around your target point.  You can then click drag that point to edit the shape or path.
    But there are so many ways to do the sort of thing you are talking about.  If you make a copy of the text layer, and make the lower of the two in the layer stack bigger (Free Transform with Alt Shift) you can then turn that lower text layer into a path or shape to manipulate it.
    Or you could add a broad stroke around the text on a new layer.  Ctrl click the stroke to load it as a selection, and turn the selection into a path using the icon at the bottom of the Paths panel, and then manipulate its points.  If you want to make the stroke a solid filled layer, then I don't know of a better way than dragging a marquee around the inner points wth Direct Selection tool, and hitting Delete.
    It's an interesting subject, so please keep asking about anything you are not sure about.

  • How can I use mp4 audio files from my iTunes library in an Elements 10 slide show?

    How can I use mp4 audio files from my iTunes library in an Elements 10 slide show?

    AAC is Advanced Audio Coding.  Basically it's a format that sounds better than MP3 but doesn't take up as much space as a lossless format (like you'd have on a CD).  More than likely you've had that encoding turned on when you ripped your music into itunes (it's the default encoder).  Therefore your LG phone won't play them.
    You need to turn off the AAC format by going to the iTunes menu, Preferences, General (at the top), then clicking the "Import Preferences" button.  Change the AAC Encoder to MP3 Encoder.  After that you'll have to make MP3 copies of your songs by right clicking them and selecting "Create MP3 Version."  You'll get a copy of the song that should transfer to your SD card and have MP3 encoding.  Hopefully your phone will play that.

  • New itunes card I got at Ralphs when I pulled the card from the backing you can't read the pin numbers. the card sould be able to be scaned to show that it is good  but they wouldn't . how can I use my card now?

    bought an iTune card when I took the paper off the card the glue took part of the pin numbers. The card should be able to be scaned, how can I use this card now Ralphs can't help thats were I bought the card

    iTunes Store: Invalid, inactive, or illegible codes

  • How can I use one photo twice in a slideshow

    I am in iPhoto '11 9.4.3 making a slideshow to send to iDVD for my mother-in-laws funeral next Wednesday.
    How can I use this one particular photo of her several times in the slide show.
    I have tried copy/past and that does not seem to work.
    Thanx in advance

    I would just duplicate the picture several times and keep inserting duplicates ...

  • How can I use the print module to print different size images on one large "canvas"?

    How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
    I was thinking the print module would do this automatically for me.

    You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

  • How can i use my apple ID with the itune store over my windows laptop

    how can i use my apple ID with the itune store over my windows laptop

    If you don't have iTunes installed on your laptop then you can download and install it from here : http://www.apple.com/itunes/download/
    You can then log into your account on it via the Store > Sign In menu option (on iTunes 11 on a PC you can get the menus to show via control-B) :
    And you can then select the Store on the left-hand sidebar (you can enable the sidebar via control-S), and then browse items in the store and buy them by clickin on their price.

  • User Variable Options: How can I use them in a Business Rule?

    How can I use a "User Variable" set in File / Preferences in a Business Rule? It doesn't seem to appear as an Essbase Substitution Variable or as a Global Variable of Business Rules. The only way I know how to use it is to place the dimension on the POV or Page dimension of a data form, then use a Global Variable in a run time prompt to pick the member and run a BR against it, or some function of it.
    What do I do if I want to have that dimension in Columns or Rows? How can I set a BR to directly reference the member chosen under User Variable Options?
    J

    Thanks Alp, but I can't seem to reproduce what you are writing below. I want to refer my Business Rule to address the value set in File / Preferences / User Variable Options; no matter what members I show elsewhere in the data form.
    My other workaround is through a run time prompt and hope the user selects the appropriate user variable at the very bottom of the selection list in order to calculate the appropriate list of members.
    J

Maybe you are looking for