How can I use an external mic to record meeting audio with quicktime player

I'm trying to use a SoundTech CM-1000 conference mic to record meetings at a conference I am running.
I'm using Quicktime for the recordings.
The SoundTech CM-1000 conference mic does not transmit any sound when connected to the Audio-in plug on my MacBook Pro.
Does my MacBook Pro require external mics that are also powered - connected via a usb port rather than, or at least in addition to, the audio-in plug, for instance?
What's happening here?
Steve

Macbook Pro does not have a microphone input
You have two options:
1 buy a USB mic and connect to a USB port
2 buy a small very cheap sound mixer that has 3.5 mic level input and a line level out put
something like this:
DAP Audio

Similar Messages

How can I use an external USB drive on my Macmini with Boot Camp and Lion/Windows 7?

I have a MacMini (Last model with a disk drive). The Mini has Lion and Windows 7 installed using Boot Camp. I want to attach a 350GB, USB, HP Personal Storage Device (Hard Drive) to the computer and be able to use it in both Lion and Windows 7 mode. The USB drive is formatted for Windows 7. I only want to use it for storage and back-up purposes for both operating systems. It would be nice if I could access the total disk from either system without having to reboot to change operating systems to view Windows 7 files and reboot again to view Lion files. Can anyone offer any guidance or any informational websites to help me? Thank you for any help!!

Yes, you’ll be able to do that.
(116841)

How can I use all tracks from multi-channel source audio with Multicam clips?

I cannot figure this out. Working in Premiere I'm prepping for a 2 camera show, with typically 4 to 6 track dual-system audio recorded by the sound guy. I can sync, and make multicam clips any number of ways–whether sync by timecode, sync by audio, or eyeballing–but whenever I edit using the MC clip, Premiere mixes down all the audio channels into a stereo single track, and I cannot pick and choose which audio track from the original to use. With 2-5 people mic'd on lavs, I need to be able to choose which audio is either cut in or heard at any given shot.
Is there any way to have control in multicam clips over which track of audio gets edited into the timeline, or even: that all tracks of audio get cut in? It's very important for the editors to be able to see waveform (which also disappears for some reason in the mixdown) and pick and choose which audio is heard?
I'm sure this might be a simple fix, but I cannot get my head around it for workflow purposes for my assistant editors. We need to use multicam, but this audio thing is driving all of us crazy. None of us can figure out how to have a multicam clip and use it with control over what audio is cut in.

True, but what I need to be able to do is have my multicam sequence in the source monitor, and cut into my working sequence with either just the audio I need from the sound guy's multi-channel WAV, OR cut in all the sound and from then I can just enable or disable what I need or don't need. But also be able to match back to the Multicam source from my working sequence.
I don't want to have to open the synced sequence, and razor blade the things I need and have to copy and paste into my working sequence in order to have the full spectrum of my multi-channel mono lav WAV files...with their waveforms visible.
Essentially, I want my Multicam clips to load in the source monitor, and the ability to cut them into the working sequence without it mixing down the audio into a single track with no visible waveform–which is what it is doing currently. Can I choose to edit in either ALL of the tracks of the WAV file along with the camera shot I want, or control which audio gets cut in?

How can I use my external hard drive for my iphoto instead of my mac book pro memory?

i don't know if this question has been asked before: how can I use my external hard drive for my iphoto instead of my mac book pro memory? just like itunes all my song are save on my external hard drive. make sense?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

How can i use Itunes to update more than one IPad with more than one owner

How can i use Itunes to update more than one IPad with more than one owner? I own an IPad and my wife owns an IPad. I want to use my system to update both IPads. We have different Apple Accounts and different applications. Is this possible?

Of course, that is too easy. I am such a bonehead.

How can i use my iPhone 4 and connect via bluetooth with my macpro

how can i use my iPhone 4 and connect via bluetooth with my macpro

The only way that you can connect your iPhone to the mac is to use it for a "Wi-fi hotspot" meaning that you can use the celluar connectivity of your phone to connect your computer to the interent.
Do you mean a MacBook Pro of the desktop MacPro?

I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...

I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...tried xing out the red x, putting them in the trash...right clicking to make them disappear...nothing works...

Just got rid of them... I closed Quicktime and was asked to delete. So I deleted them. Problem solved.

How do I use an external mic with the iPad4?

How do I connect an external mic to the new iPad4? Older models seem to have worked, but the lightning connector causes a lot of problems. I would like to use my Zoom H1 with my iPad4 and GarageBand. Any ideas? Thanks so much!

Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

I'm using the note taking view of Word 2011 for Mac so I can record a meeting as well as take notes. The audio of the internal microphone is so low - can I attach an external mic and have it work with note taking view?

Can I attach an external mic to my Macbook Air to enhance sound input for the note taking view of Word 2011 for Mac? I've tried preferences to up the volume of my sound, but I still cannot hear the recording. Any suggestions? I need to record a meeting as well as take notes so I'd like to use this tool, but the audio is not good enough.

A USB microphone can work with the Air, and I've used them before with my 11" Air. Griffin also made a product (the iMic) that will add a standard computer microphone port, connecting to your USB port. It's heyday was the time of the old iBook laptops (which also lacked a microphone in jack) but I think it's still around.
The single sound port on the 2011 models, as I recall, supports iPhone style headphone/microphone but I don't believe it will support a standard microphone input.
The built in microphone sits on the left side of the computer and I suspect wouldn't work well for picking up a lecture unless you were sitting just right in position vs. the speaker (preferably having the speaker positioned to the left and sitting really close). By design most laptop microphones presume they are going to be mainly used to record a sound coming from the person sitting at the keyboard, while for a lecture you normally would prefer it concentrate on sound coming from behind the screen.

How can I use a bad IMEI AT&T iphone 5 with straight talk ?

Someone sold me a bad IMEI AT&T iphone 5. I had an AT&T iphone 4 with straight talk prior to buying this phone. I didn't know the IMEI was bad so I bought the iphone 5 hoping to switch. I cut my SIM card and put it into the iphone 5. Everything worked perfectly fine so I went ahead and gave the dude the money. I went to sleep and wake up the next day and try to make a call and I get a message saying my phone has been blocked from the network. I contacted straight talk and they thought it was a problem of theirs so somehow they got my phone to work again. Everything was good , calls, texts , and data. 2 hours later, the same problem happens. So I call straight talk again , tell them the problem. They fix It again, 2 hours later , THE SAME PROBLEM. I gave up this time and began looking for answers. Is there any way I can use this iphone 5 with straight talk ? There was a comment I saw through my search for answers where if I get another straight talk sim everything would work again. Is this true? How can I use a bad IMEI AT&T iphone 5 with straight talk ?

If that IMEI has been blacklisted by AT&T, then it is blacklisted by all USA carriers, as well as several participating Canadian and Mexican carriers.
As of 31 October 2012, USA Cellular Providers are sharing a common IMEI/ESN database to ensure that phones blacklisted on one carrier can't be activated on another carrier. AT&T and T-Mobile are also participating members of the GSM-networks global shared blacklists.

How can i use index in select query.. facing problem with the select query.

Hi Friends,
I am facing a serious problem in one of the select query. It is taking a lot of time to fetch data in Production Scenario.
Here is the query:
SELECT * APPENDING CORRESPONDING FIELDS OF TABLE tbl_summary
    FROM ztftelat LEFT JOIN ztfzberep
     ON ztfzberep~gjahr = st_input-gjahr
     AND ztfzberep~poper = st_input-poper
     AND ztfzberepcntr = ztftelatrprctr
    WHERE rldnr = c_telstra_accounting
      AND rrcty = c_actual
      AND rvers = c_ver_001
      AND rbukrs = st_input-bukrs
      AND racct = st_input-saknr
      AND ryear = st_input-gjahr
      And rzzlstar in r_lstar
      AND rpmax = c_max_period.
There are 5 indices present for Table ZTFTELAT.
Indices of ZTFTELAT:
Name   Description
0        Primary key( RCLNT,RLDNR,RRCTY,RVERS,RYEAR,ROBJNR,SOBJNR,RTCUR,RUNIT,DRCRK,RPMAX)
005    Profit (RCLNT,RPRCTR)
1        Ledger, company code, account (RLDNR,RBUKRS, RACCT)
2        Ledger, company code, cost center (RLDNR, RBUKRS,RCNTR)
3        Account, cost center (RACCT,RCNTR)
4        RCLNT/RLDNR/RRCTY/RVERS/RYEAR/RZZAUFNR
Z01    Activity Type, Account (RZZLSTAR,RACCT)
Z02    RYEAR-RBUKRS- RZZZBER-RLDNR
Can anyone help me out why it is taking so much time and how we can reduce it ? and also tell me if I want to use index number 1 then how can I use?
Thanks in advance.

Hi Shiva,
I am using two more select queries with the same manner ....
here are the other two select query :
***************1************************
SELECT * APPENDING CORRESPONDING FIELDS OF TABLE tbl_summary
    FROM ztftelpt LEFT JOIN ztfzberep
     ON ztfzberep~gjahr = st_input-gjahr
     AND ztfzberep~poper = st_input-poper
     AND ztfzberepcntr = ztftelptrprctr
    WHERE rldnr = c_telstra_projects
      AND rrcty = c_actual
      AND rvers = c_ver_001
      AND rbukrs = st_input-bukrs
      AND racct = st_input-saknr
      AND ryear = st_input-gjahr
      and rzzlstar in r_lstar
      AND rpmax = c_max_period.
and the second one is
*************************2************************
SELECT * APPENDING CORRESPONDING FIELDS OF TABLE tbl_summary
    FROM ztftelnt LEFT JOIN ztfzberep
     ON ztfzberep~gjahr = st_input-gjahr
     AND ztfzberep~poper = st_input-poper
     AND ztfzberepcntr = ztftelntrprctr
    WHERE rldnr = c_telstra_networks
      AND rrcty = c_actual
      AND rvers = c_ver_001
      AND rbukrs = st_input-bukrs
      AND racct = st_input-saknr
      AND ryear = st_input-gjahr
      and rzzlstar in r_lstar
      AND rpmax = c_max_period.
for both the above table program is taking very less time .... although both the table used in above queries have similar amount of data. And i can not remove the APPENDING CORRESPONDING. because i have to append the data after fetching from the tables. if i will not use it will delete all the data fetched earlier.
Thanks on advanced......
Sourabh

How can I use an external hard drive to both back up and free up storage on my macbook?

I've used a hard drive to back up my 2012 Macbook Pro via Time Machine, but I'm not sure how to use it as external storage to move things like video and music off of my Mac to free up memory and then how to move the same things from the hard drive on to other devices like my iPad or iPhone. For instance, I have a ton of movies and would like to store most of them on an external hard drive so that they aren't taking up all of my memory on my Mac, but want to be able to move them easily back onto my phone or iPad. Also, can I use the same hard drive to both back up my computer and use it for external storage? If so, how do I do that?

Always use two drives for this: one for backup; the other for storage. Don't mix the two uses on one drive. There's a greater risk of data lost without that redundancy.
If you plan to backup using Time Machine, then be sure the backup drive's capacity is at least twice that of the drive you are backing up.

How can I use my external hard drive with my new (firewire-less) MacBook?

I read in another post that the available firewire adapters don't work for external hard drives. So how can I get my music, etc. off my external hard drive and onto my new computer?

Like the second or third one in this picture?
http://upload.wikimedia.org/wikipedia/commons/f/f4/USBtypes2.jpg
They are USB ports - the smaller one is a mini-USB (like you might find on a digital camera) and the third is a USB-B port (such as on a printer). You can use a mini or standard USB cable (depending on the port) to connect it to your Macbook.
Matt

How can I use my external hard drive for storage?

I just bought a new external hard drive, the My Book Premium Edition II. I have totally spent all of the memory on my hard drive and want to transfer my music to my new hard drive and use it as my iTunes directory, but everytime I try to move my music files, it tells me I cannot because the drive cannot be formatted. On the box it says Mac OSX compatible but when I open up the Get Info it says, Format: Windows NT Filesystem. It is 1Tb. How can I get this to work????? Help please.

jbsilliman
That's because Macs can read from NT FS drives, but can't write to them. Microsoft have maintained NTFS as a closed system. To use the drive you'll need to reformat it to something the Mac can read and write to.
Regards
TD

How can i use an external screen on mountain lion when i'm running on battery power?

Hey all:
I just upgraded from snow leopard to Mountain Lion, and i use external screen, keyboard and mouse all the time....
On Mountain Lion it's perfect when the power adaptor is connected as soon as you close the LID your external screen becomes the primary screeen and it's fully functional desktop (no mirroring or extension screen)
But the problem is when i'm in battery power, in snow leopard i used to close my lid my mac goes to sleep then i wake it up using the mouse and immediately open the LID so it doesn't go to sleep again and now i'm running on battery power with a primary external screen.
Any idea how to use an external screen on mountain lion while i'm on battery power? (i know i can use mirroring but i want just 1 primary screen and the laptop screen would be turned off )
Thanks for the help.....
Sherif

Sherif Daniel wrote:
my question is how to use an external display with mountain lion when i'm running on the laptop battery not connecting the ac adaptor?
Thanks again
You can't with the lid closed, that's one of the rules for clamshell mode.
http://support.apple.com/kb/ht3131

How can I use an external mic to record meeting audio with quicktime player

Similar Messages

Maybe you are looking for